Aeration Optimization in an Activated Sludge Wastewater Treatment Plant Based on CFD Method: A Case Study

Authors: Seyed Sina Khamesi, Rana Rafiei

Abstract:

The extensive aeration process is widely used for wastewater treatment. However, due to the high energy consumption of this process, which is closely related to the issues of environmental sustainability and global climate change, this article presents a simple solution to reduce energy consumption in this process. The amount of required energy is one of the critical considerations for various wastewater treatment techniques. For this purpose, an industrial wastewater treatment plant and all energy-consumer equipment in terms of energy consumption have been analyzed. The investigations and measurements revealed that the aeration unit has the highest energy consumption rate. To address this, an innovative approach is proposed to reduce energy consumption in the identified high-consumer unit. The proposed solution involves introducing baffles to divide the tank into multiple parts and using a tank with a small width and long length to enhance the mixing process. This approach reduces the need for additional equipment and significantly lowers energy consumption. To thoroughly scrutinize the proposed solution and analyze the behavior of the multi-phase fluid inside the tank, the sewage flow has been modeled using the computational fluid dynamics (CFD) method. The study presents an optimal design for the aeration unit based on these findings. The results indicate that implementing the technique suggested in this article can decrease total energy consumption by 33.15% and can be applied to all types of biological treatment plants.

Keywords: Wastewater treatment, aeration, energy consumption, Computational Fluid Dynamics, activated sludge.

References:

[1] Heidari, M., et al., CO2 capture activity of a novel CaO adsorbent stabilized with (ZrO2+ Al2O3+ CeO2)-based additive under mild and realistic calcium looping conditions. Journal of CO2 Utilization, 2021. 53: p. 101747.
[2] Hreiz, R., M. Latifi, and N. Roche, Optimal design and operation of activated sludge processes: State-of-the-art. Chemical Engineering Journal, 2015. 281: p. 900-920.
[3] Ashrafivala, M., et al., Investigation of H2O2/UV advanced oxidation process on the removal rate of coliforms from the industrial effluent: A pilot-scale study. International Journal of Hydrogen Energy, 2022. 47(78): p. 33530-33540.
[4] Rojas, J., T. Zhelev, and M. Graells, Energy Efficiency Optimization of Wastewater Treatment-Study of ATAD, in Computer Aided Chemical Engineering. 2010, Elsevier. p. 967-972.
[5] Shu, L., et al., Process optimization in a stirred tank bioreactor based on CFD-Taguchi method: A case study. Journal of Cleaner Production, 2019. 230: p. 1074-1084.
[6] Zhang, Z., Y. Zeng, and A. Kusiak, Minimizing pump energy in a wastewater processing plant. Energy, 2012. 47(1): p. 505-514.
[7] Descoins, N., et al., Energy efficiency in waste water treatments plants: Optimization of activated sludge process coupled with anaerobic digestion. Energy, 2012. 41(1): p. 153-164.
[8] Gerard, M. and L. Thierry, Energy and emergy analysis to evaluate sustainability of small wastewater treatment plants: application to a constructed wetland and a sequencing batch reactor. Journal of Water Resource and Protection, 2010. 2010.
[9] Jonasson, M. and I. Ulf Jeppsson, Energy Benchmark for wastewater treatment processes, 2007, MS Thesis, 2007, Dept. of Industrial Electrical Engineering and Automation ….
[10] Saghafi, S., et al., Electrical energy management in industrial wastewater treatment plant. International Journal of Engineering, 2019. 32(9): p. 1269-1276.
[11] Kusiak, A., Y. Zeng, and Z. Zhang, Modeling and analysis of pumps in a wastewater treatment plant: A data-mining approach. Engineering Applications of Artificial Intelligence, 2013. 26(7): p. 1643-1651.
[12] Hernández-Sancho, F., M. Molinos-Senante, and R. Sala-Garrido, Energy efficiency in Spanish wastewater treatment plants: A non-radial DEA approach. Science of the Total Environment, 2011. 409(14): p. 2693-2699.
[13] Takdastan, A., et al., Investigation of the excess sludge reduction in SBR by oxidizing some sludge by ozone. 2009.
[14] Waqas, S., et al., Recent progress in integrated fixed-film activated sludge process for wastewater treatment: A review. Journal of environmental management, 2020. 268: p. 110718.
[15] Åmand, L. and B. Carlsson, Optimal aeration control in a nitrifying activated sludge process. Water research, 2012. 46(7): p. 2101-2110.
[16] Brandt, M., et al., Energy efficiency in the water industry, a global research project. Water Practice and Technology, 2011. 6(2).
[17] Chae, K.-J. and J. Kang, Estimating the energy independence of a municipal wastewater treatment plant incorporating green energy resources. Energy Conversion and Management, 2013. 75: p. 664-672.
[18] Epa, U., L. Climate, and E. Program, Energy Efficiency in Water and Wastewater Facilities-A Guide to Developing and Implementing Greenhouse Gas Reduction Programs. EPA’s Local Government Climate and Energy Strategy Series. US EPA, US, 2013.
[19] von Bayern, A.M.P., et al., The role of experience in problem solving and innovative tool use in crows. Current Biology, 2009. 19(22): p. 1965-1968.
[20] Le Moullec, Y., et al., CFD simulation of the hydrodynamics and reactions in an activated sludge channel reactor of wastewater treatment. Chemical Engineering Science, 2010. 65(1): p. 492-498.
[21] Patziger, M., Improving wastewater treatment plant performance by applying CFD models for design and operation: selected case studies. Water Science and Technology, 2021. 84(2): p. 323-332.
[22] Höhne, T. and T. Mamedov, CFD simulation of aeration and mixing processes in a full-scale oxidation ditch. Energies, 2020. 13(7): p. 1633.
[23] Karpinska, A.M. and J. Bridgeman, CFD-aided modelling of activated sludge systems–A critical review. Water research, 2016. 88: p. 861-879.
[24] Sánchez, F., et al., CFD simulation of fluid dynamic and biokinetic processes within activated sludge reactors under intermittent aeration regime. Water research, 2018. 139: p. 47-57.
[25] Al-Hazmi, H.E., et al., Optimization of the aeration strategies in a deammonification sequencing batch reactor for efficient nitrogen removal and mitigation of N2O production. Environmental Science & Technology, 2020. 55(2): p. 1218-1230.
[26] Miao, Y., et al., Start-up of single-stage partial nitrification-anammox process treating low-strength swage and its restoration from nitrate accumulation. Bioresource Technology, 2016. 218: p. 771-779.
[27] Van Hulle, S.W., et al., Engineering aspects and practical application of autotrophic nitrogen removal from nitrogen rich streams. Chemical engineering journal, 2010. 162(1): p. 1-20.
[28] Alavi, N., et al., Kinetics of nitrogen removal in an anammox up-flow anaerobic bioreactor for treating petrochemical industries wastewater (ammonia plant). Asian Journal of chemistry, 2011. 23(12): p. 5220.
[29] Asteriadis, I., et al., A control strategy for an intermittently aerated and fed bioreactor to reduce aeration costs: A simulation study. Biochemical Engineering Journal, 2021. 173: p. 108081.
[30] Nsi, E.W., et al., Analytical Assessment of Borehole Water in Some Local Government Areas of Akwa Ibom State, South-South Nigeria.
[31] Prokkola, H., et al., Reliability of Biodegradation Measurements for Inhibitive Industrial Wastewaters. ChemEngineering, 2022. 6(1): p. 15.
[32] OECD, T.N., 203: Fish, Acute Toxicity Test. OECD guidelines for the testing of chemicals, Section, 1992. 2.
[33] Vanková, M., Biodegradability analysis of pharmaceuticals used in developing countries; screening with OxiTop C-110. 2010.
[34] Oakley, S., Onsite Nitrogen Removal Text. in (MA Gross and NE Deal, eds.) University Curriculum Development for Decentralized Wastewater Management. National Decentralized Water Resources Capacity Development Project. University of Arkansas, Fayetteville, AR, 2005.
[35] Drewnowski, J., et al., Aeration process in bioreactors as the main energy consumer in a wastewater treatment plant. Review of solutions and methods of process optimization. Processes, 2019. 7(5): p. 311.
[36] Major-Godlewska, M. and J. Karcz, Power consumption for an agitated vessel equipped with pitched blade turbine and short baffles. Chemical Papers, 2018. 72(5): p. 1081-1088.
[37] Gujer, W., Systems analysis for water technology. 2008: Springer Science & Business Media.
[38] Henze, M., et al., Activated sludge models ASM1, ASM2, ASM2d and ASM3. 2000: IWA publishing.
[39] Barrios, J., et al., Two-phase hydrodynamic modelling and experimental characterization in an activated sludge electrooxidation flow reactor. Chemical Engineering Research and Design, 2019. 141: p. 339-349.
[40] Launder, B.E. and D.B. Spalding, The numerical computation of turbulent flows, in Numerical prediction of flow, heat transfer, turbulence and combustion. 1983, Elsevier. p. 96-116.
[41] Kim, S.-E. A near-wall treatment using wall functions sensitized to pressure gradient. in Separated and Complex Flows, ASME/JSME Fluids Engineering and Laser Anemometry Conference and Exhibition, Hilton Head, SC, 1995. 1995.
[42] Wu, P., et al., Feasibility of applying intermittent aeration and baffles for achieving granular nitritation in a continuous short-cut denitrifying phosphorus removal system. Science of the Total Environment, 2020. 715: p. 137023.