Preparation and Characterization of Recycled PET/PP Blends from Automotive Textile Waste for Use in the Furniture Edge Banding Sector

Authors: Merve Ozer, Tolga Gokkurt, Yasemen Gokkurt, Ezgi Bozbey

Abstract:

In this study, research has been conducted on the recovery of automotive textile waste, which has heavy use in the automotive sector and consists of PET/PP content, through the upcycling technique of post-product and post-consumer usage. The aim is to investigate the formulation and production methods that will enable the substitution of original PP raw materials, used in the production of plastic edge bands, with PP/PET alloys. The lamination structure of the mentioned waste makes it impossible to separate the incompatible PP and PET phases, thereby hindering the production of high-quality raw materials or products through recycling. In this study, a comprehensive process was examined through a two-step production process using different types of block and maleic-grafted copolymers to achieve compatibility between these two incompatible phases. The obtained plastic raw materials, referred to as PP/PET blends, were examined in detail, with a focus on their mechanical, thermal, and morphological properties, to discuss their substitutability for the original raw materials.

Keywords: Twin screw extruders, mechanical recycling, melt blending, plastic blends, polyethylene, polypropylene, recycling of plastics.

References:

[1] PlasticsEurope. Plastics – the facts 2013: An analysis of European latest plastics production, demand and waste data. Association of Plastics Manufacturers, 2013.
[2] PlasticsEurope. Plastics-the facts 2019: An analysis of European latest plastics production, demand and waste data. Association of Plastics Manufacturers,2019.
[3] C. J. Rhodes, Plastic pollution and potential solutions. Science Progress, pp. 101(3), 207–260, 2018.
[4] J. R. Jambeck, R. Geyer, C. Wilcox, T. R. Siegler, M. Perryman, A. Andrady, R. Narayan, K. L. Law, Plastic waste inputs from land into the ocean. Science, pp. 347, 768–771, 2015.
[5] R. Geyer, J. R. Jambeck, K.L. Law, Production, use, and fate of all plastics ever made. Science Advances, pp. 3(7) ,2017.
[6] D. A’Vard and P. Allan, National Plastics Recycling Survey, National Packaging Covenant Industry Association, Sustainable Resource Use Pty Ltd, 2014.
[7] S. Yin, R. Tuladhar, F. Shi, R. A. Shanks, M. Combe, & T. Collister, “Mechanical reprocessing of polyolefin waste: A review,” Polymer Engineering & Science, pp. 55(12), 2899–2909, 2015.
[8] S. Mbarek, M. Jaziri, C. Carrot, “Recycling poly(ethylene terephtalate) wastes: Properties of poly(ethylene terephtalate)/polycarbonate blends and the effect of a transesterification catalyst, ” Polymer Engineering & Science, pp. 46(10), 1378–1386, 2006.
[9] A. Brems, J. Baeyens, & R. Dewil, “Recycling and recovery of post-consumer plastic solid waste in a European context,” Thermal Science, 1-6(3), 669–685, 2012.
[10] P. Brachet, L.T. Høydal, T., E. L Hinrichsen, & F. Melum, “Modification of mechanical properties of recycled polypropylene from post-consumer containers,” Waste Management, pp. 28(12), 2456–2464, 2008.
[11] S. Vervoort, J. den Doelder, E. Tocha, J. Genoyer, K. L. Walton, Y. Hu, J. Munro, K. Jeltsch, “Compatibilization of polypropylene-polyethylene blends,” Polymer Engineering & Science, pp. 58(4), 460–465, 2017.
[12] C. Aumnate, N. Rudolph, & M. Sarmadi, “Recycling of Polypropylene/Polyethylene Blends: Effect of Chain Structure on the Crystallization Behaviors,Polymers, ” pp. 11(9), 1456, 2019.
[13] M. Nechifor, F. Tanasă, C.A. Teacă & M. Zănoagă, “Compatibilization strategies toward new polymer materials from re-/up-cycled plastics,” International Journal of Polymer Analysis and Characterization, pp. 1–18, 2018.
[14] L. A. Utracki, “Compatibilization of polymer blends,” Can. J. Chem. Eng. pp. 80:1008–1016, 2002
[15] A. Leclair, BD. Favis, “The role of interfacial contact in immiscible binary polymer blends and its influence on mechanical properties,” Polymer 1996;37:4723–8.
[16] K. FRIEDRICH, “Microfibrillar reinforced composites from PET/PP blends: processing, morphology and mechanical properties,” Composites Science and Technology, pp. 65(1), 107–116, 2005.
[17] S. Vervoortden, J. Doelder, E.Tocha, J.Genoyer, K. L. Walton, Y. Hu, K. Jeltsch, “Compatibilization of polypropylene-polyethylene blends, ” Polymer Engineering & Science, pp. 58(4), 460–465. 2017.
[18] M. Akbari, A. Zadhoush, & M. Haghighat, “PET/PP blending by using PP-g-MA synthesized by solid phase,” Journal of Applied Polymer Science, pp. 104(6), 3986–3993, 2007.
[19] Y. Tao, & K. Mai, “Non-isothermal crystallization and melting behavior of compatibilized polypropylene/recycled poly(ethylene terephthalate) blends, ” European Polymer Journal, pp. 43(8), 3538–3549, 2007.
[20] Z.O. Oyman, & T. Tinçer “Melt blending of poly(ethylene terephthalate) with polypropylene in the presence of silane coupling agent, ” Journal of Applied Polymer Science, 89(4), pp. 1039–1048, 2003.
[21] E. P. Plueddemann, “Silane Coupling Agents”, 2nd ed.; Plenum; New York, 1991.
[22] ISO 11357-3:2018, Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization, ISO, 2018
[23] ISO 527-2:2012, Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics, ISO, 2012
[24] ISO 180:2019, Plastics — Determination of Izod impact strength, ISO, 2019
[25] ISO 1133-1:2012, Plastics-Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics-Part 1: Standard Method, ISO, 2012.
[26] ISO 1183-1:2019, Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method
[27] ISO 868:2003, Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
[28] A. C.-Y. Wong, & F. Lam, “Study of selected thermal characteristics of polypropylene/polyethylene binary blends using DSC and TGA”, pp. 21(6), 691–696, 2002.
[29] C. Aumnate, N. Rudolph, & M. Sarmadi, “Recycling of Polypropylene/Polyethylene Blends: Effect of Chain Structure on the Crystallization Behaviors”. pp. 11(9), 1456, 2019.
[30] G. A. Uehara, M. P. França, & S. V. Canevarolo Junior, “Recycling assessment of multilayer flexible packaging films using design of experiments. Polímeros”, pp. 25(4), 371–381, 2015.
[31] A. Schindler, M. Doedt, Ş. Gezgin, J. Menzel & S. Schmölzer, Identification of polymers by means of DSC, TG, STA and computer-assisted database search. Journal of Thermal Analysis and Calorimetry, pp. 129(2), 833–842, 2017.
[32] J. M. Eagan, J. Xu, R. Di Girolamo, Thurber, C. M. Macosko, C. W. A. M. LaPointe, G. W. Coates, “Combining polyethylene and polypropylene: Enhanced performance with PE/iPP multiblock polymers”. Science, pp. 355(6327), 814–816, 2017.
[33] Y. Kazemi, A. Ramezani Kakroodi, & D. Rodrigue, “Compatibilization efficiency in post-consumer recycled polyethylene/polypropylene blends: Effect of contamination”. Polymer Engineering & Science, pp. 55(10), 2368–2376, 2015.
[34] J. Xu, J. M. Eagan, S.-S. Kim, S. Pan, B. Lee, K. Klimovica, F. S. Bates, “Compatibilization of Isotactic Polypropylene (iPP) and High-Density Polyethylene (HDPE) with iPP–PE Multiblock Copolymers Macromolecules”, 2018.
[35] L.-P. Li, B. Yin, & M.-B. Yang, “Morphology prediction and the effect of core-shell structure on the rheological behavior of PP/EPDM/HDPE ternary blends”. Polymer Engineering & Science, pp. 51(12), 2425–2433, 2011.