Assets Integrity Management in Oil and Gas Production Facilities Through Corrosion Mitigation and Inspection Strategy: A Case Study of Sarir Oilfield

Authors: Iftikhar Ahmad, Youssef Elkezza

Abstract:

Sarir oilfield is in North Africa. It has facilities of oil and gas production. The assets of the Sarir oilfield can be divided into five following categories, namely: (i) Well bore and wellheads; (ii) Vessels such as separators, desalters, and gas processing facilities; (iii) Pipelines including all flow lines, trunk lines, and shipping lines; (iv) storage tanks; (v) Other assets such as turbines and compressors, etc. The nature of the petroleum industry recognizes the potential human, environmental and financial consequences that can result from failing to maintain the integrity of wellheads, vessels, tanks, pipelines, and other assets. The importance of effective asset integrity management increases as the industry infrastructure continues to age. The primary objective of assets integrity management (AIM) is to maintain assets in a fit-for-service condition while extending their remaining life in the most reliable, safe, and cost-effective manner. Corrosion management is one of the important aspects of successful asset integrity management. It covers corrosion mitigation, monitoring, inspection, and risk evaluation. External corrosion on pipelines, well bores, buried assets, and bottoms of tanks is controlled with a combination of coatings by cathodic protection, while the external corrosion on surface equipment, wellheads, and storage tanks is controlled by coatings. The periodic cleaning of the pipeline by pigging helps in the prevention of internal corrosion. Further, internal corrosion of pipelines is prevented by chemical treatment and controlled operations. This paper describes the integrity management system used in the Sarir oil field for its oil and gas production facilities based on standard practices of corrosion mitigation and inspection.

Keywords: Assets integrity management, corrosion prevention in oilfield assets, corrosion management in oilfield, corrosion prevention and inspection activities.

References:

[1] Corrosion Control in Petroleum Production, NACE (1979).
[2] C. de Waard and U. Lotz (1993). Prediction of CO2 corrosion of carbon steel. Corrosion 93, Paper No. 69, NACE 1993.
[3] S. Nesic and L. Lunde (1994). CO2 corrosion of carbon steel in two-phase flow. Corrosion 93, Paper No. 640, NACE 1994.
[4] J. L. Crolet and M. R. Bonis (1985). A tentative method for predicting the corrosivity of well in new CO2 fields. Corrosion 85, Paper No. 27, NACE 1985.
[5] G. Doyle, M.V. Seica, and M.W.F. Grabinsky, "The role of soil in the external corrosion of cast iron water mains in Toronto, Canada", Canadian Geotechnical Journal, April 2003. (https://doi.org/10.1139/t02-106).
[6] International Standards ISO 55000 (2014): Asset management — Overview, principles and terminology; ISO 55001 (2014): Asset management — Management systems — Requirements and ISO 55002 (2018): Asset management — Management systems – Guidelines for the Application of 55001.
[7] R. Norsworthy (2009). Coatings used in Conjunction with Cathodic Protection – Shielding Vs Non-shielding Pipeline Coatings, published by NACE International, Paper No. 4017.
[8] J. S. Smart, and T. Pickthall, T. (2004). Internal Corrosion Measurement Enhances Pipeline Integrity, Pipeline & Gas Journal, October 2004. (www. Pipelineandgasjournal.com).
[9] NACE Standard Recommended Practice RP0169 – 2002 Item No. 21001 (2002). Control of External Corrosion on Underground or Submerged Metallic Piping Systems, NACE International.
[10] DOT Regulation 49 CFR Part 195 (2002). Pipeline Safety: Pipeline Integrity Management in High Consequence Areas (Hazardous Liquid Operators with less than 500 miles of pipeline). Research and Special Programs Administration (RSPA), U.S. Department of Transportation (DOT) Federal Register, Vol. 67, No. 11, pp. 2136 – 2144.
[11] A. Dugstad, L. Lunde, and S. Nesic (1994). Control of Internal Corrosion in Multi-Phase Oil and Gas Pipelines, Presented in Prevention of Pipeline Corrosion Conference, organized by Pipe Line Industry and Pipes & Pipelines International, held at Houston (Texas), USA on October 17 – 20, 1994.
[12] NACE SP0502 (2008). Pipeline External Corrosion Direct Assessment Methodology, Published by NACE in 2008.
[13] NACE Standard RP0102 (2002). In-Line Inspection of Pipelines, Published by NACE in 2002.