Sustainable Development of Medium Strength Concrete Using Polypropylene as Aggregate Replacement
Authors: Reza Keihani, Ali Bahadori-Jahromi, Timothy James Clacy
Abstract:
Plastic as an environmental burden is a well-rehearsed topic in the research area. This is due to its global demand and destructive impacts on the environment, which has been a significant concern to the governments. Typically, the use of plastic in the construction industry is seen across low-density, non-structural applications due to its diverse range of benefits including high strength-to-weight ratios, manipulability and durability. It can be said that with the level of plastic consumption experienced in the construction industry, an ongoing responsibility is shown for this sector to continually innovate alternatives for application of recycled plastic waste such as using plastic made replacement from polyethylene, polystyrene, polyvinyl and polypropylene in the concrete mix design. In this study, the impact of partially replaced fine aggregate with polypropylene in the concrete mix design was investigated to evaluate the concrete’s compressive strength by conducting an experimental work which comprises of six concrete mix batches with polypropylene replacements ranging from 0.5 to 3.0%. The results demonstrated a typical decline in the compressive strength with the addition of plastic aggregate, despite this reduction generally mitigated as the level of plastic in the concrete mix increased. Furthermore, two of the six plastic-containing concrete mixes tested in the current study exceeded the ST5 standardised prescribed concrete mix compressive strength requirement at 28-days containing 1.50% and 2.50% plastic aggregates, which demonstrated the potential for use of recycled polypropylene in structural applications, as a partial by mass, fine aggregate replacement in the concrete mix.
Keywords: Compressive strength, concrete, polypropylene, sustainability.
Digital Object Identifier (DOI): doi.org/10.5281/zenodo.3462071
Procedia APA BibTeX Chicago EndNote Harvard JSON MLA RIS XML ISO 690 PDF Downloads 921References:
[1] R. Wagner, "Plastics and Sustainability A valuation of Environmental Benefits, Costs and Opportunities for Continuous Improvements", Memphis, Tennessee, 2016.
[2] Department for Business, Energy and Industrial Strategy (2018) Monthly Statistics of Building Materials and Components: August 2018, No. 522 (Online) (Available at:https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/737942/18-cs9__Construction_Building_Materials__Bulletin_August_2018.pdf).
[3] Babafemi, A.J., Savija, B., Paul, S.C. and Anggraini, V. (2018) Engineering Properties of Concrete with Waste Recyled Plastic: A Review. Sustainability, 10(11), p.1-26. (Available at: https://www.mdpi.com/2071-1050/10/11/3875).
[4] Saxena, R., Siddique, S., Gupta, T., Sharma, R.K. Chaudhary, S. (2018) Impact Resistance and Energy Absorption Capacity of Concrete Containing Plastic Waste. Construction and Building Materials, 176(1), p.415-421. (Available at: https://www-sciencedirectcom. ezproxy.uwl.ac.uk/science/article/pii/S0950061818310948).
[5] Sosoi, G., Barbuta, M., Serbanoiu, A.A., Babor, D. and Burlacu, A. (2018) Waste as Aggregate Substitution in Polymer Concrete. Procedia Manufacturing, 22(1), p.347-351. (Available at: https://www.sciencedirect.com/science/article/pii/S2351978918303469).
[6] Thorneycroft, J., Orr, J., Savoikar, P. and Ball, R.J. (2018) Performance of Structural Concrete with Recycled Plastic Waste as a Partial Replacement for Sand. Construction and Building Materials, 161(1), p.63-69. (Available at: https://www-sciencedirectcom.ezproxy.uwl.ac.uk/science /article/pii/S0950061817323474).
[7] Zaleska, M., Pavlikova, M., Studnicka, J. and Pavlik, Z. (2018a) Effect of Waste Expanded Polypropylene-Based Aggregate on Mechanical and Thermal Properties of Lightweight Concrete. IOP Conference Series: Materials Science and Engineering, 371(1), p.1-6. (Available at: http://iopscience.iop.org/article/10.1088/1757899X/371/1/012002/pdf).
[8] Plastics Europe (2017) Plastics – the Facts 2017: An Analysis of European Plastics Production, Demand and Waste Data (Online). (Available at: https://www.plasticseurope.org /application/files/1715/2111/1527/Plastics_the_facts_2017_FINAL_for_website.pdf).
[9] Croke, B. (2017) Developing a Polypropylene Recycling Infrastructure (Online). (Available at: https://search-proquestcom.ezproxy.uwl.ac.uk/docview/1907238538?pqorigsite=summon)
[10] Smarzewski, P. (2018) Flexural Toughness of High-Performance Concrete with Basalt and Polypropylene Short Fibres. (Available at: https://www.sciencedirectcom. ezproxy.uwl.ac.uk/science/article/pii/S0263822318304227).
[11] Jacob-Vaillancourt, C. and Sorelli, L. (2018) Characterization of Concrete Composites with Recycled Plastic Aggregates from Postconsumer Material Streams. Construction and Building Materials, 182(1), p.561-575 (Available at: https://www.sciencedirectcom.ezproxy .uwl.ac.uk/science/article/pii/S0950061818314752).
[12] British Standards Institution (2016a) BS 8500-1:2015+A1:2016 (Incorporating Corrigendum No. 1): Concrete – Complementary British Standard to BS EN 206 Part 1: Method of Specifying and Guidance for the Specifier. London: British Standards Institute.
[13] British Standards Institution (2016b) BS 8500 2:2015+A1:2016: Concrete – Complementary British Standard to BS EN 206 Part 2: Specification for Constituent Materials and Concrete. London: British Standards Institute.
[14] British Standards Institution (2016c) BS EN 206:2013+A1:2016 (Incorporating corrigendum May 2014): Concrete — Specification, Performance, Production and Conformity. London: British Standards Institute.
[15] British Standards Institution (2008) BS EN 12620:2002+A1:2008 (Incorporating Corrigendum May 2004): Aggregates for Concrete. London: British Standards Institute.
[16] The Concrete Society (2016) Good Concrete Guide 8: Concrete Practice – Guide on the Practical Aspects of Concreting. 2nd Ed. Camberley, Surrey: The Concrete Society.
[17] Homes England (2018) Housing Statistics: 1 April 2018 – 30 September 2018 (Online) (Available at: https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/760193/Housing_Statistics_November_2018.pdf).
[18] Chudley, R. and Greeno, R. (2016) Building Construction Handbook. 11th Ed. Oxon: Routledge.
[19] LaFarge (2008) Blue Circle Cement: Data Sheet (Online) (Available at: http://www.beersltd.co.uk/downloads/ coshh/blue_circle_cement_CEMII.pdf).
[20] Tarmac (2017) Cement Declaration of Performance Sheet (Online) (Available at: https://dop.asp-bd.co.uk/DOP_FILES/562355_Dunbar_mastercrete.pdf)
[21] British Standards Institution (2015) BS EN 197-1:2011 (Incorporating Corrigenda November 2011 and October 2015): Cement Part 1: Composition, Specifications and Conformity Criteria for Common Cements. London: British Standards Institute.
[22] Omni-Cem (2011) Report for EON-UK: Ratcliffe PFA and FBA Samples. Internal Omni-Cem report. Unpublished.
[23] Travis Perkins (2019a) Travis Perkins Gravel and Shingle Trade Pack 10mm (Online) (Available at: https://www.travisperkins.co.uk/Travis-Perkins-Gravel-and-Shingle-Trade-Pack-10mm/p/996244)
[24] Travis Perkins (2019b) Travis Perkins Grit/Sharp Sand Trade Pack (Online) (Available at: https://www.travisperkins.co.uk/Travis-Perkins-Grit-Sharp-Sand-Trade-Pack/p/996242)
[25] Aggregate Industries (2013) Specialist Silica Sands: Garside Sands Washed Sharp Sand (Online) (Available at: https://www.aggregate.com/sites/aiuk/files/atoms /files/agi3754_silica_washed_sharp_sand.pdf.
[26] Group (2018) Axpoly ABS52 1007 – Product Information Sheet: Black ABS ResinGrade (Online) (Available at: https://axiongroup.co.uk/wp/wpcontent/uploads/2019/01/axpoly-abs52-1007-product-info-sheet.pdf).
[27] Thomas, M. (2007) Concrete: Optimizing the Use of Fly Ash in Concrete. Portland Cement Association. (Online) (Available at: https://www.cement.org/docs/defaultsource/Fc_concrete_technology/is548-optimizing-the-use-of-fly-ash-concrete.pdf).
[28] Gorse, C., Johnston, D. and Pritchard, M. (2012) A Dictionary of Construction, Surveying and Civil Engineering. Oxford: Oxford University Press.
[29] British Standards Institution (2009c) BS EN 12350-2:2009: Testing Fresh Concrete Part 2 –Slump Test. London: British Standards Institute.
[30] Ele International (2019b) Slump Test Set BS & ASTM. C/W Slump Cone Base Plate SteelRule Tamping Rod & Funnel (34-0192)
[Online]. (Available at:https://www.ele.com/Product/slump-test-set-bs-astm-c-w-slump-cone-base-plate-steel-ruletamping-rod-funnel-/66).
[31] Ele International (2019a) 150mm Cube Mould 2-Part Clamp Type, Cast Iron Construction,BS EN Compliant (34-4670)
[32] Ele International (2017) Operating Instructions: Large Curing Tank - 34-6575 Series (Online) (Available at: https://www.ele.com/Product/large-curing-tank-c-w-with-circulatingpump-heater-thermostat-unit-and-lower-rack/79)
[33] Ele International (2011) ADR-Auto V2.0 Range Accurate and Consistent Testing (Online) (Available at: http://www.testele.fi/pdf/ADR_Auto_V2_Brochure_Datasheet_09_11.pdf)
[34] British Standards Institution (2000) BS EN 12390-4:2000: Testing Hardened Concrete Part 4– Compressive Strength – Specification for Testing Machines. London: British Standards Institute.
[35] British Standards Institution (2011) BS EN 12390-3:2009 (Incorporating Corrigendum August 2011): Testing Hardened Concrete Part 3 – Compressive Strength of Test Specimens. London: British Standards Institute.
[36] Poonyakan, A., Rachakornkij, M., Wecharatana, M. and Smittakorn, W. (2018) Potential Useof Plastic Wastes for Low Thermal Conductivity Concrete. Materials, 11(10), p.2-17. (Available at: https://www.mdpi.com/1996-1944/11/10/1938).
[37] Rubio-de Hita (2018) Reuse of Plastic Waste of Mixed Polypropylene as Aggregate in Mortars for the Manufacture of Pieces for Restoring Jack Arch Floors with Timber Beams. Journal of Cleaner Production, 198(1), p.1515-1525.
[38] Zaleska, M., Pavlikova, M., Studnicka, J. and Pavlik, Z. (2018b) Effect of Waste Expanded Polypropylene-Based Aggregate on Mechanical and Thermal Properties of Lightweight Concrete. IOP Conference Series: Materials Science and Engineering, 371(1), p.1-6.
[39] Xu, G. and Shi, X. (2018) Characteristics and Applications of Fly Ash as a Sustainable Construction Material: a State-of-the-Art Review. Resources, Conservation & Recycling, 136, p.95-109. (Available at: https://www-sciencedirect-com.ezproxy.uwl.ac.uk/science/article/pii/S092134491830140X)
[40] Hemalatha, T. and Ramaswamy, A. (2017) A review on fly ash characteristics e towards promoting high volume utilization in developing sustainable concrete. Journal of Cleaner Production, 147, p.546-559. (Available at: https://www-sciencedirectcom.ezproxy.uwl.ac.uk/science/article/pii/S0959652617301294)
[41] Yao, Z.T., Ji, X.S., Sarker, P.K., Tang, J.H., Ge, L.Q., Xia, M.S. and Xi, Y.Q. (2015) AComprehensive Review on the Applications of Coal Fly Ash. Earth-Science Reviews, 141(1):p.105-121. (Available at:https://espace.curtin.edu.au/bitstream/handle/20.500.11937/17671/212814_139843_Paper_published_Earth_Sciences_Review_V_141_2015_pp_105-121.pdf?sequence=2)
[42] Ejiogu, I. K., Ejiogu. P. A. P., Nkeonye, P. O. and Yaro, S. A. (2018) The Effect of Elevated Temperature on the Mechanical Properties of Waste Plastics Polyethylene Trephthalate (PET) and Low Density Polyethylene (LDPE) Filled Normal Concrete Blocks. International Journal for Research in Applied Science & Engineering Technology, 6(5), p.1510-1520.(Available at: Available at: http://www.ijraset.com/fileserve.php?FID=16084)
[43] Zaleska, M., Pavlikova, M., Jankovsky, O., Lojka, M., Pivak, A. and Pavlik, Z. (2018c) Experimental Analysis of MOC Composite with a Waste-Expanded Polypropylene-Based Aggregate. Materials, 11(6), p.1-15. (Available at: https://www.mdpi.com/1996-1944/11/6/931)