Sampling and Characterization of Fines Created during the Shredding of Non Hazardous Waste

Authors: Soukaina Oujana, Peggy Zwolinski

Abstract:

Fines are heterogeneous residues created during the shredding of non-hazardous waste. They are one of the most challenging issues faced by recyclers, because they are at the present time considered as non-sortable and non-reusable mixtures destined to landfill. However, fines contain a large amount of recoverable materials that could be recycled or reused for the production of solid recovered fuel. This research is conducted in relation to a project named ValoRABES. The aim is to characterize fines and establish a suitable sorting process in order to extract the materials contained in the mixture and define their suitable recovery paths. This paper will highlight the importance of a good sampling and will propose a sampling methodology for fines characterization. First results about the characterization will be also presented.

Keywords: Fines, non-hazardous waste, recovery, shredding residues, waste characterization, waste sampling.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1316536

References:

[1] ADEME report “ADEME Chiffres clés 2015_92+4P.ind- chiffres-cles-dechets-2015.pdf.” Retrieved from: https://www.connaissancedesenergies.org/sites/default/files/pdf-actualites/chiffres-cles-dechets-2015.pdf , on: 10/03/2017
[2] J. A. Salvato, N. L. Nemerow, and F. J. Agardy, Environmental Engineering. John Wiley & Sons, 2003.
[3] F. R. McDougall, P. R. White, M. Franke, and P. Hindle, Integrated Solid Waste Management: A Life Cycle Inventory. John Wiley & Sons, 2008.
[4] C. Jourdain and P. Zwolinski, “Optimization of a Non-Hazardous Integrated Solid Waste Processing Line,” Procedia CIRP, vol. 29, pp. 674–679, Jan. 2015.
[5] A. E. Adeniran, A. T. Nubi, and A. O. Adelopo, “Solid waste generation and characterization in the University of Lagos for a sustainable waste management,” Waste Manag., May 2017.
[6] N.-B. Chang and E. Davila, “Municipal solid waste characterizations and management strategies for the Lower Rio Grande Valley, Texas,” Waste Manag., vol. 28, no. 5, pp. 776–794, Jan. 2008.
[7] E. Gidarakos, G. Havas, and P. Ntzamilis, “Municipal solid waste composition determination supporting the integrated solid waste management system in the island of Crete,” Waste Manag., vol. 26, no. 6, pp. 668–679, Jan. 2006.
[8] EPA, “Municipal Waste Characterization Procedures,” Environ. Prot. Agency Irel. pp. 1–27, 1996. Retrieved from: https://www.epa.ie/pubs/reports/waste/wastecharacterisation/EPA_municipal_waste_characterisation.pdf, on 10/06/20017.
[9] PN 1497_Waste Characterization Methodology for Direct Waste Analysis Studies in Canada - pn_1497_waste_char.rpt_final, Retrieved from: http://www.ccme.ca/files/Resources/waste/packaging/pn_1497_waste_char.rpt_final_e.pdf , on 02/06/20017
[10] M. E. Edjabou et al., “Municipal solid waste composition: Sampling methodology, statistical analyses, and case study evaluation,” Waste Manag., vol. 36, pp. 12–23, Feb. 2015.
[11] J. H. Martin, A. R. Collins, and R. G. Diener, “A Sampling Protocol for Composting, Recycling, and Re-use of Municipal Solid Waste,” J. Air Waste Manag. Assoc., vol. 45, no. 11, pp. 864–870, Nov. 1995.