Commenced in January 2007
Frequency: Monthly
Edition: International
Paper Count: 32601
Flexural Properties of Halloysite Nanotubes-Polyester Nanocomposites Exposed to Aggressive Environment

Authors: Mohd Shahneel Saharudin, Jiacheng Wei, Islam Shyha, Fawad Inam


This study aimed to investigate the effect of aggressive environment on the flexural properties of halloysite nanotubes-polyester nanocomposites. Results showed that the addition of halloysite nanotubes into polyester matrix was found to improve flexural properties of the nanocomposites in dry condition and after water-methanol exposure. Significant increase in surface roughness was also observed and measured by Alicona Infinite Focus optical microscope.

Keywords: Halloysite nanotubes, polymer degradation, flexural properties, surface roughness.

Digital Object Identifier (DOI):

Procedia APA BibTeX Chicago EndNote Harvard JSON MLA RIS XML ISO 690 PDF Downloads 903


[1] M. S. Saharudin, I. Shyha, and F. Inam, “Viscoelastic and mechanical properties of multi-layered-graphene polyester composites,” in 2nd International Conference on Advances in Mechanical Engineering, 2016, pp. 41–45.
[2] N. N. Bonnia, “Mechanical properties and environmental stress cracking resistance of rubber toughened polyester/kenaf composite,” eXPRESS Polym. Lett., vol. 4, no. 2, pp. 55–61, 2010.
[3] M. T. Albdiry, B. F. Yousif, and H. Ku, “Fracture toughness and toughening mechanisms of unsaturated polyester-based clay nanocomposites,” pp. 1–10, 2013.
[4] L. F. Al-Saidi, K. Mortensen, and K. Almdal, “Environmental stress cracking resistance. Behaviour of polycarbonate in different chemicals by determination of the time-dependence of stress at constant strains,” Polym. Degrad. Stab., vol. 82, no. 3, pp. 451–461, Jan. 2003.
[5] L. Yan, N. Chouw, and K. Jayaraman, “Effect of UV and water spraying on the mechanical properties of flax fabric reinforced polymer composites used for civil engineering applications,” Mater. Des., vol. 71, pp. 17–25, 2015.
[6] M. S. Saharudin, R. Atif, I. Shyha, and F. Inam, “The degradation of mechanical properties in polymer nano-composites exposed to liquid media – a review,” RSC Adv., vol. 6, no. 2, pp. 1076–1089, 2016.
[7] P. R. Lewis, “Environmental stress cracking of polycarbonate catheter connectors,” Eng. Fail. Anal., vol. 16, no. 6, pp. 1816–1824, 2009.
[8] C. Yilong Li, Kun Dai, Junhui Zhao, Ning Li, Guoqiang Zheng, Chuntai Liu, Jingbo Chen, Shen, “Liquid-Sensing Behaviors of Carbon Black/ Polypropylene and Carbon Nanotubes/Polypropylene Composites: A Comparative Study,” Polym. Compos., vol. 36, pp. 205–213, 2015.
[9] M. S. Saharudin, I. Shyha, and F. Inam, “The effect of methanol exposure on the flexural and tensile properties of halloysite nanoclay polyester,” IRES 17th Int. Conf. United Kingdom, no. November, pp. 40–44, 2015.
[10] H. Alamri and I. M. Low, “Microstructural, mechanical, and thermal characteristics of recycled cellulose fiber-halloysite-epoxy hybrid nanocomposites,” Polym. Compos., vol. 33, no. 4, pp. 589–600, 2012.
[11] N. N. Bonnia, S. H. Ahmad, S. N. Surip, S. S. Nurul, H. N. Azlina, and H. Anuar, “Mechanical Properties and Environmental Stress Cracking Resistance of Rubber Toughened Polyester/Clay Composite,” in Advanced Materials Research, 2012, vol. 576, pp. 318–321.
[12] M. Saharudin, J. Wei, I. Shyha, and F. Inam, “The degradation of mechanical properties in halloysite nanoclay-polyester nanocomposites exposed in seawater environment,” J. Nanomater., 2016.
[13] M. S. Saharudin, A. Jumahat, A. Z. Kahar, and S. Ahmad, “The Influence of Alumina Filler on Impact Properties of Short Glass Fiber Reinforced Epoxy,” in Applied Mechanics and Materials, 2013, vol. 393, pp. 88–93.
[14] K. P. Pramoda and T. Liu, “Effect of moisture on the dynamic mechanical relaxation of polyamide-6/clay nanocomposites,” J. Polym. Sci. Part B Polym. Phys., vol. 42, no. 10, pp. 1823–1830, 2004.
[15] S. Zainuddin, M. V. Hosur, Y. Zhou, A. Kumar, and S. Jeelani, “Durability studies of montmorillonite clay filled epoxy composites under different environmental conditions,” Mater. Sci. Eng. A, vol. 507, no. 1–2, pp. 117–123, 2009.
[16] Y. Zeng, H.-Y. Liu, Y.-W. Mai, and X.-S. Du, “Improving interlaminar fracture toughness of carbon fibre/epoxy laminates by incorporation of nano-particles,” Compos. Part B Eng., vol. 43, no. 1, pp. 90–94, Jan. 2012.
[17] E. Pisanova, S. Zhandarov, E. Mäder, I. Ahmad, and R. J. Young, “Three techniques of interfacial bond strength estimation from direct observation of crack initiation and propagation in polymer-fibre systems,” Compos. Part A Appl. Sci. Manuf., vol. 32, no. 3–4, pp. 435–443, 2001.
[18] M. R. Ishak, S. M. Sapuan, Z. Leman, M. Z. Rahman, U. M. Anwar, and J. P. Siregar, “Sugar palm (Arenga pinnata): Its fibres, polymers and composites,” Carbohydr Polym, vol. 91, no. 2, pp. 699–710, 2013.
[19] M. S. Saharudin, R. Atif, and F. Inam, “Effect of Short-Term Water Exposure on the Mechanical Properties of Halloysite Nanotube-Multi Layer Graphene Reinforced Polyester Nanocomposites,” Polymers (Basel)., vol. 9, no. 1, 2017.