Commenced in January 2007
Frequency: Monthly
Edition: International
Paper Count: 32727
Comparative Study of Bending Angle in Laser Forming Process Using Artificial Neural Network and Fuzzy Logic System

Authors: M. Hassani, Y. Hassani, N. Ajudanioskooei, N. N. Benvid


Laser Forming process as a non-contact thermal forming process is widely used to forming and bending of metallic and non-metallic sheets. In this process, according to laser irradiation along a specific path, sheet is bent. One of the most important output parameters in laser forming is bending angle that depends on process parameters such as physical and mechanical properties of materials, laser power, laser travel speed and the number of scan passes. In this paper, Artificial Neural Network and Fuzzy Logic System were used to predict of bending angle in laser forming process. Inputs to these models were laser travel speed and laser power. The comparison between artificial neural network and fuzzy logic models with experimental results has been shown both of these models have high ability to prediction of bending angles with minimum errors.

Keywords: Artificial neural network, bending angle, fuzzy logic, laser forming.

Digital Object Identifier (DOI):

Procedia APA BibTeX Chicago EndNote Harvard JSON MLA RIS XML ISO 690 PDF Downloads 894


[1] X. Zhand, "Laser Assisted High Precision Bending and It's Applications". PhD Thesis, Faculty of Purdue University, 2004.
[2] G. Dearden, and S.P. Edwardson, “Pure and Applied Optics 5”, Journal of Optics A, pp. 8–15, 2003.
[3] H. Shen, and F. Vollertsen, “Modelling of laser forming: An review.” Computational Materials Science, Vol 46, pp. 834–840, 2009.
[4] M. Shirani, A. Akbari, and M. Hassani, “Adsorption of cadmium (II) and copper (II) from soil and water samples onto a magnetic organozeolite modified with 2-(3, 4-dihydroxyphenyl)-1,3-dithiane using an artificial neural network and analysed byflame atomic absorption spectrometry”, Analytical Methods, DOI: 10.1039/c5ay01269d, 2015.
[5] S. Shakeri, A. Ghassemi, M. Hassani, and A. Hajian, “Investigation of material removal rate and surface roughness in wire electrical discharge machining process for cementation alloy steel using artificial neural network”. International Journal Fo Advanced Manufacturing Technology, DOI: 10.1007/s00170-015-7349-y, 2015.
[6] S. P. Edwardson, K. G. Watkins, E. Abed, K. Bartkowiak, and G. dearden, "Geometrical Influences on the Bend Angle Rate per Pass during Multi-pass 2D Laser Forming". Journal of Physics D: Applied Physics, pp. 382-389, 2006.
[7] G. Yanjin, S. Sheng, Zh. Guoqun, and L. Yiguo, "Influence of Material Properties on the Laser Forming Process of Sheet Metals", Journal of Mat. Processing Tech., 2005.
[8] P. Cheng, Y. Fan, J. Zhang, and Y. L. Yao, "Laser Forming of Varying Thickness Plate- part I". Journal of Manufacturing Science and Eng., pp. 634-641., 2006.
[9] M. Geiger, and F. Vollertsen, "The Mechanism oh Laser Forming", CIRP Ann., Vol.42, No.1, PP.301-304, 1993.
[10] F. Vollertsen, "An analytical model for Laser bending", Journal of Lasers Engineering, Vol.2, pp.261-276, 1994.
[11] C.L. Yan, K.C. Chen, and W.B. Lee, "Laser Bending of Leadframe Materials", Journal of Material Processing Technology, Vol. 82, pp.117-121, 1998.
[12] Y. Shi, H. Shen, Zh. Yao, and J. Hu, “Temprature gradient mechanism in laser forming of thin plates”. Optic & Laser Technology, Vol.39, pp. 858-863, 2007.
[13] A. K. Kyrsanidi. Th. B. Kermanidis, and Sp.G. Pantelakis, “An analytical model for the prediction of distortions caused by the laser forming process ", Journal of Material Processing Technology, Vol. 104, pp. 94-102, 2000.
[14] P.J. Cheng, and S.C. Lin, “An analytical model to estimate angle formed by laser,” Journal of Material Processing Technology, Vol. 108, pp. 314-319, 2001.
[15] X. Wang, and W. Xu, “Parameter prediction in laser bending of aluminum alloy sheet”, Front. Mech. Eng, Vol.3, 293–298, 2008.
[16] P.J. Cheng, and S.C. Lin, " Using neural networks to predict bending angle of sheet metal formed by laser", Journal of Machine Tools & Manufacture, Vol. 40, pp. 1185–1197, 2000.
[17] Z. Fu, J. Moa, L. Chen, and W. Chen, " Using genetic algorithm-back propagation neural network prediction and finite-element model simulation to optimize the process of multiple-step incremental air-bending forming of sheet metal ", Journal of Materials and Design, Vol. 31, pp. 267–277, 2010.
[18] A. K. Kyrsanidi, Th. B. Kermanidis, and Sp. G. Pantelakis, " An analytical model for the prediction of distortions caused by the laser forming process", Journal of Materials Processing Technology, Vol. 104, pp. 94-102, 2000.
[19] M.T. Hagan, H.B. Demath, M. Beale, “Neural Network Design”, PWS Publications, pp. 167-189, 1996.