Preparation of n-type Bi2Te3 Films by Electrophoretic Deposition

Authors: Tahereh Talebi, Reza Ghomashchi, Pejman Talemi, Sima Aminorroaya

Abstract:

A high quality crack-free film of Bi₂Te₃ material has been deposited for the first time using electrophoretic deposition (EPD) and microstructures of various films have been investigated. One of the most important thermoelectric (TE) applications is Bi₂Te₃ to manufacture TE generators (TEG) which can convert waste heat into electricity targeting the global warming issue. However, the high cost of the manufacturing process of TEGs keeps them expensive and out of reach for commercialization. Therefore, utilizing EPD as a simple and cost-effective method will open new opportunities for TEG’s commercialization. This method has been recently used for advanced materials such as microelectronics and has attracted a lot of attention from both scientists and industry. In this study, the effect of media of suspensions has been investigated on the quality of the deposited films as well as their microstructure. In summary, finding an appropriate suspension is a critical step for a successful EPD process and has an important effect on both the film’s quality and its future properties.

Keywords: Bi2Te3, electrical conductivity, electrophoretic deposition, thermoelectric materials, thick films.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1129756

References:

[1] DiSalvo FJ. Thermoelectric cooling and power generation. Science. 1999;285:703-6.
[2] Snyder GJ, Toberer ES. Complex thermoelectric materials. Nature Materials. 2008;7:105-14.
[3] Shakouri A. Recent developments in semiconductor thermoelectric physics and materials. Annual Review of Materials Research. 2011;41:399-431.
[4] Dresselhaus MS, Chen G, Tang MY, Yang RG, Lee H, Wang DZ, et al. New directions for low-dimensional thermoelectric materials. Advanced Materials. 2007;19:1043-53.
[5] Hamid Elsheikh M, Shnawah DA, Sabri MFM, Said SBM, Haji Hassan M, Ali Bashir MB, et al. A review on thermoelectric renewable energy: Principle parameters that affect their performance. Renewable and Sustainable Energy Reviews. 2014;30:337-55.
[6] LeBlanc S, Yee SK, Scullin ML, Dames C, Goodson KE. Material and manufacturing cost considerations for thermoelectrics. Renewable and Sustainable Energy Reviews. 2014;32:313-27.
[7] Alam H, Ramakrishna S. A review on the enhancement of figure of merit from bulk to nano-thermoelectric materials. Nano Energy. 2013;2:190-212.
[8] Chen S, Ren Z. Recent progress of half-Heusler for moderate temperature thermoelectric applications. Materials Today. 2013;16:387-95.
[9] Nolas GS, Poon J, Kanatzidis M. Recent developments in bulk thermoelectric materials. MRS Bulletin. 2006;31:199-205.
[10] Yang J, Caillat T. Thermoelectric Materials for Space and Automotive Power Generation. MRS Bulletin. 2006;31:224-9.
[11] Besra L, Liu M. A review on fundamentals and applications of electrophoretic deposition (EPD). Progress in Materials Science. 2007;52:1-61.
[12] Corni I, Ryan MP, Boccaccini AR. Electrophoretic deposition: From traditional ceramics to nanotechnology. Journal of the European Ceramic Society. 2008;28:1353-67.
[13] Hamaker HC. The London—van der Waals attraction between spherical particles. Physica. 1937;4:1058-72.
[14] Talebi T, Raissi B, Maghsoudipour A. Electrophoretic deposition of YSZ electrolyte on porous NiO-YSZ substrate for solid oxide fuel cells. Key Engineering Materials. 2009;412:215- 20.
[15] Put S, Vleugels J, Anné G, Van der Biest O. Functionally graded ceramic and ceramic–metal composites shaped by electrophoretic deposition. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 2003;222:223-32.
[16] Maiti HS, Datta S, Basu RN. High-Tc Superconductor Coating on Metal Substrates by an Electrophoretic Technique. Journal of the American Ceramic Society. 1989;72:1733-5.
[17] Javidi M, Bahrololoom ME, Javadpour S, Ma J. Studying surface charge and suspension stability of hydroxyapatite powder in isopropyl alcohol to prepare stable suspension for electrophoretic deposition. Advances in Applied Ceramics. 2009;108:241-8.