Commenced in January 2007
Frequency: Monthly
Edition: International
Paper Count: 32759
UV-Cured Coatings Based on Acrylated Epoxidized Soybean Oil and Epoxy Carboxylate

Authors: Alaaddin Cerit, Suheyla Kocaman, Ulku Soydal

Abstract:

During the past two decades, photoinitiated polymerization has been attracting a great interest in terms of scientific and industrial activity. The wide recognition of UV treatment in the polymer industry results not only from its many practical applications but also from its advantage for low-cost processes. Unlike most thermal curing systems, radiation-curable systems can polymerize at room temperature without additional heat, and the curing is completed in a very short time. The advantage of cationic UV technology is that post-cure can continue in the ‘dark’ after radiation. In this study, bio-based acrylated epoxidized soybean oil (AESO) was cured with UV radiation using radicalic photoinitiator Irgacure 184. Triarylsulphonium hexafluoroantimonate was used as cationic photoinitiator for curing of 3,4-epoxycyclohexylmethyl-3,4-epoxycyclohexanecarboxylate. The effect of curing time and the amount of initiators on the curing degree and thermal properties were investigated. The thermal properties of the coating were analyzed after crosslinking UV irradiation. The level of crosslinking in the coating was evaluated by FTIR analysis. Cationic UV-cured coatings demonstrated excellent adhesion and corrosion resistance properties. Therefore, our study holds a great potential with its simple and low-cost applications.

Keywords: Acrylated epoxidized soybean oil, epoxy carboxylate, thermal properties, UV-curing.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1124209

Procedia APA BibTeX Chicago EndNote Harvard JSON MLA RIS XML ISO 690 PDF Downloads 1945

References:


[1] C. Decker, Progr. Polym. Sci., 21, 593 (1993).
[2] D. K. Chattopadhyay, S.S. Panda, K.V.S.N. Raju, Prog. Org. Coat., 54, 10 (2005).
[3] D. H. Klein, Kjorg, T. Dinnissen, Surf. Coat. Int., 12, 558 (1998).
[4] A. Noomen, JOCCA, 64, 347 (1981).
[5] A. Udagawa, F. Sakurai, T. Takahashi, J. Appl. Polym. Sci., 42, 1861 (1991).
[6] I. Ozaytekin, H. Turedi, G. Ahmetli, Polym. Compos. (2015), doi: 10.1002/pc.23542 (2015).
[7] S.J. Park, F.-L. Jin, J.-R. Lee, Mater. Sci. Eng. A, 374, 109 (2004).