Theoretical Model of a Flat Plate Solar Collector Integrated with Phase Change Material

Authors: Mouna Hamed, Ammar B. Brahim

Abstract:

The objective of this work was to develop a theoretical model to study the dynamic thermal behavior of a flat plate solar collector integrated with a phase change material (PCM). The PCM acted as a heat source for the solar system during low intensity solar radiation and night. The energy balance equations for the various components of the collector as well as for the PCM were formulated and numerically solved using Matlab computational program. The effect of natural convection on heat during the melting process was taken into account by using an effective thermal conductivity. The model was used to investigate the effect of inlet water temperature, water mass flow rate, and PCM thickness on the outlet water temperature and the melt fraction during charging and discharging modes. A comparison with a collector without PCM was made. Results showed that charging and discharging processes of PCM have six stages. The adding of PCM caused a decrease in temperature during charge and an increase during discharge. The rise was most enhanced for higher inlet water temperature, PCM thickness and for lower mass flow rate. Analysis indicated that the complete melting time was shorter than the solidification time due to the high heat transfer coefficient during melting. The increases in PCM height and mass flow rate were not linear with the melting and solidification times.

Keywords: Thermal energy storage, phase change material, melting, solidification.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1111779

References:

[1] A. K. Bhargava, “Solar water heater based on phase changing material,” Appl. Energy, vol. 14, 1983, pp. 197-209.
[2] S. M. Shalaby, M. A. Bek, “Experimental of a novel indirect solar dryer implementing PCM as energy storage medium,” Energ. Convers. Manage., vol. 83, 2014, pp. 1-8.
[3] Y. Dutil, D. R. Rousse, N. Ben Salah, S. Lassue, L. Zalewski, “A review on phase-change materials: Mathematical modeling and simulations,” Renew. Sust. Energ. Rev., vol. 15, 2011, pp. 112-130.
[4] L. F. Cabeza, M. Ibanez, C. Sole, J. Roca, M. Nogues, “Experimentation with water tank including a PCM module,” Sol. Energy Mater. Solar Cells, vol. 90, 2006, pp. 1273-1282.
[5] G. Serale, E. Fabrizio, M. Perino, “Design of a low-temperature solar heating system based on a slurry Phase Change Material (PCS),” Energ. Build., vol. 106, 2015, pp. 44-58.
[6] G. N. Tiwari, S. N. Rai, S. Tram, M. Singh, “Performance prediction of PCM collection cum-storage water heater: quasi-steady state solution,” Energ. Convers. Manage., vol. 28, 1988, pp. 219-223.
[7] Y. Rabin, I. Bor-Niv, E. Korin, B. Mikic, “Integrated solar collector storage system based on a salt hydrate phase change material,” Sol. Energy, vol. 55, 1995, pp. 435-444.
[8] A. Kȕrklȕ, A. Özmerzi, S. Bilgin, “Thermal performance of a water-phase change material solar collector,” Renewable Energy, vol. 26, 2002, pp. 391-399.
[9] M. Chaabane, H. Mhiri, P. Bournot, “Thermal performance of an integrated collector storage solar water heater (ICSSWH) with phase change materials (PCM),” Energ. Convers. Manage., vol. 78, 2014, pp. 897-903.
[10] S. Bouadila, M. Fteiti, M. M. Oueslati, A. Guizani, A. Farhat, “Enhancement of latent heat storage in a rectangular cavity: Solar water heater case study,” Energ. Convers. Manage., vol. 78, 2014, pp. 904-912.
[11] S. M. A. Bekkouche, “Modélisation du comportement thermique de quelques dispositifs solaires,” Thesis, University Abou-bakar Belkaid-Tlemcen, 2008.
[12] J. A. Duffie, W. A. Beckman, Solar energy thermal process, Wiley Interscience New York, 1974.
[13] K. Shiv, G. N. Tiwari, M. K. Gaur, “Development of empirical relation to evaluate the heat transfer coefficients and fractional energy in basin type hybrid (PV/T) active solar still,” Desalination, vol. 250, 2010, pp. 214-221.
[14] F. P. Incropera, D. P. Dewitt, T. L. Bergman, V. S, Lavine, Fundamentals of heat and mass transfer, Six edition, 2006.
[15] A. Laouadi, M. Lacroix, “Thermal performance of a latent heat energy storage ventilated panel for electric load management,” Int. J. Heat Mass Transfer, vol. 42, 1999, pp. 275-286.
[16] P. D. Silva, L. C. Gonçalves, L. Pires, “Transient behavior of latent-heat thermal energy store: numerical and numerical studies,” Appl. Energy, vol. 73, 2002, pp. 83-98.
[17] A. B. Crowley, “Numerical solution of Stefan problems,” Int. J. Heat Mass Transfer, vol. 21, 1978, pp. 215-219.
[18] L. Yang, X. Zhang, G. Xu, “Thermal performance of a storage packed bed using spherical capsules filled with PCM having different melting points,” Energ. Build., vol. 68, 2014, pp.639-646.