Effect of Thickness on Structural and Electrical Properties of CuAlS2 Thin Films Grown by Two Stage Vacuum Thermal Evaporation Technique

Authors: A. U. Moreh, M. Momoh, H. N. Yahya, B. Hamza, I. G. Saidu, S. Abdullahi

Abstract:

This work studies the effect of thickness on structural and electrical properties of CuAlS2 thin films grown by two stage vacuum thermal evaporation technique. CuAlS2 thin films of thicknesses 50nm, 100nm and 200nm were deposited on suitably cleaned corning 7059 glass substrate at room temperature (RT). In the first stage Cu-Al precursors were grown at room temperature by thermal evaporation and in the second stage Cu-Al precursors were converted to CuAlS2 thin films by sulfurisation under sulfur atmosphere at the temperature of 673K. The structural properties of the films were examined by X-ray diffraction (XRD) technique while electrical properties of the specimens were studied using four point probe method. The XRD studies revealed that the films are of crystalline in nature having tetragonal structure. The variations of the micro-structural parameters, such as crystallite size (D), dislocation density ( ), and micro-strain ( ), with film thickness were investigated. The results showed that the crystallite sizes increase as the thickness of the film increases. The dislocation density and micro-strain decreases as the thickness increases. The resistivity (  ) of CuAlS2 film is found to decrease with increase in film thickness, which is related to the increase of carrier concentration with film thickness. Thus thicker films exhibit the lowest resistivity and high carrier concentration, implying these are the most conductive films. Low electrical resistivity and high carrier concentration are widely used as the essential components in various optoelectronic devices such as light-emitting diode and photovoltaic cells.

Keywords: Crystalline, CuAlS2, evaporation, resistivity, sulfurisation, thickness.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1338963

References:

[1] D. N. Okoli, A. J. Ekpunobi and C. E. Okeke, “Optical Properties of Chemical Bath deposited CuAlS2 Thin Films”. The pacific Journal of Science and Technology. Vol.7 pp. 59-63, 2006.
[2] J. A. Tariq and A. J. Mushtak, “Structure and optical properties of CuAlS2 Thin films by CBD”, Turkish Journal of Physics, vol. 34 pp. 107- 116, 2010.
[3] C.O. El Moctar, K. Kambas, S. Marsillac, U. A. Anagnostopoulos and J. C. Bern`ede, “Optical Properties of CuAlX2 (X= Se, Te) thin Films obtained by Annealing of Copper, Aluminum and Chalcogen layers sequentially deposited”, Thin Solid Films, vol. 371, pp. 453-461, 2000.
[4] P.B. Ahirrao, S.R. Gosavi, S.S. Sanjay and R. S. Patil, “Wide Band Nanocrystalline CuSCN thin films deposited by Modified Chemical method”, Archives of Physics Research, vol. 2, pp.29-33, 2011.
[5] H. Dan, T, Ren-Yu, Z. Yu-Jun, N. Jian-Ju, C. Xin-Hua and Y. Chun- Mei, “First principle study of CuAlS2 for P-type transparent conductive materials”, Journal of Physics D: Applied Physics, vol.43, pp.1-7, 2010.
[6] W. N. Honeyman, “Crystals of the I-IlI-VI2 Ternary Semiconductors CuAlS2 and CuAlSe2 Prepared by Vapor Transport with Iodine transport”, Journal of Physics and Chemistry of Solids, vol.30, pp.1935- 1940, 2011.
[7] I. Illican, Y. Caglar, and M. Caglar, “Structural, Morphological and Optical Properties of CuAlS2 thin films deposited by Spray Pyrolisis”, Journal of Optoelectronics and Advanced Material, vol.10 pp.10, 2008.
[8] M. Caglar and I. Saliha,” Structural, morphological and optical properties of CuAlS2 thin films deposited by spray Pyrolisis”, Optics Communications Journal, vol. 281, pp.1615-1624, 2008.
[9] C. Mujadat, I. Saliha and Y. Caglar, “Structural, Morphological and Optical properties of CuAlS2 films prepared by Spray Pyrolisis”, Optical Communication, vol. 281, pp.1615-1624, 2008.
[10] H. Edward, “Thermal evaporator user manual, Emerging Communication Technology Institute”, pp.1-8, 2008.
[11] A. U. Moreh, M. Momoh, and B. Hamza, “Influence of Substrate Temperature on Optical Properties of Nanostructured CuAlS2 Thin Films Grown By Two Stage Vacuum Thermal Evaporation technique”, International Journal of Engineering Science Invention vol.2, pp 2319 – 6734, 2013.
[12] A. Bouloura, K. Djessas, and D. Todorovic, “Structural and Optical Properties of Cu (In,Ga)Se2 Grown by Closed- Spaced Vapor transport Technique”, Material Science in Semiconductor Processing, vol.7, pp. 82-87, 2009.
[13] K. Sarma, R. Sarma, and H. L. Das, “Structural Characterization of Thermally Evaporated CdSe thin Films”, Chalcogenide Letters, vol.5 pp. 153-163, 2008.
[14] A.A. Ogwu, T.H. Darma, and E. Bouquerel, “Electrical resistivity of Copper oxide thin Films Prepared by Reactive Magnetron Sputtering”, Journal of Achievements in Materials and Manufacturing Engineering, vol.24, pp. 172-177, 2007.
[15] S. Agilan, D. Mangalaraj, S. K. Narayandass and G. Mohan Rao, “Effect of Thickness and Substrate Temperature On structure and Optical Band gap of Wall deposited CuInSe2 Polycrystalline Thin Films (Unpublished work style),” unpublished.
[16] K. Pawan, J. Nidhi, and R. K. Agrawal, “Effect of substrate temperature on optical properties of Bi2S3 chalcogenide thin films” Chalcogenide Letters.vol.7, pp. 89-94, 2010.
[17] R. Brini, G. Schmer, M. Kanzari, and B. Rezig, “Study of Growth of CuAlS2 thin Films on Oriented Silicon (111)”, Journal of Solid Thin Films, vol.517 pp. 2191-2194, 2009.
[18] C. J. Olejniceka, L.E. Flannerya, S. A. Darveau, C.L. Exstroma, S. Kment, N. J. Iannob and R.J. Soukup, “CuIn1−xAlxS2 thin Films Prepared by sulfurisation of Metallic Precursors”, Journal of Alloys and Compounds, vol.509 pp.10020–10024, 2011.
[19] H.L. Chen, Y.M. Lu and W.S. Hwang, “Effect of Film Thickness on Structural and Electrical Properties of Sputter-Deposited Nickel Oxide” Films Materials. Transactions, Vol. 46, pp. 872- 879, 2005.
[20] J. Myoung, W. Yoon, D. Lee, I. Yun, S. Bae, and S. Lee, “Effects of Thickness Variation on Properties of ZnO Thin Films Grown by Pulsed Laser Deposition”, Jpn. J. Appl. Phys. Vol. 41, pp. 28–31, 2002.
[21] M.S. Hossain, R. Islam, and K. A. Khan, “Effects of various parameters on the DC electrical properties of ZnTe:V thin films”, Journal of Ovonic Research, vol.5, pp.195- 205, 2009.
[22] A. Jain, P. Sagar and M.R. Mehra, “Changes of structural, optical and electrical properties of sol-gel derived ZnO films with their thickness”, Materials Science-Poland, vol.25, pp.240-241, 2007.
[23] A. U. Ubale, V. P. Deshpande and D. P. Gulwade, “Electrical, optical and structural properties of Nano-structured Sb2S3 thin films deposited by CBD techniques”, Chalcogenides Letters, vol.7, pp.101-109, 2010.
[24] M.S Shinde, P.b. Arhirrao, I.J. Patil and R.S. Patil, “Thickness dependant electrical and Optical properties of nano-crystalline copper Sulphide thin films grown by simple chemical route”, Indian Journal of Pure and Applied Physics, vol.50, pp. 657-660, 2012.
[25] R. A. Kumar, V. Manivannan and S. Krishnaraj, “Growth and characterization of ZnO Nano thin films using Spray pyrolisis”, International Journal of Research in Pure and Applied Physics, vol. 3, pp. 39-42, 2013.
[26] W. Hung-Wei, C. Chien-Hsun, C. Yu-Fu, H. Shih-Hua, C. Yung-Wei, C. Guan-Syun and T. Wu-Han, “Study of AZO thin Films under different Ar flow and Sputtering Power by rf Magnetron sputtering”, Proceedings of the International Multi Conference of Engineers and Computer Scientists, vol.2, pp.1-4, 2013.
[27] A. U. Moreh and B. Hamza, “On the electrical properties of CuAlS2 thin films Grown by two stage vacuum thermal Evaporation method (Unpublished work style),” unpublished