Evaluation of Soil Stiffness and Strength for Quality Control of Compacted Earthwork

Authors: A. Sawangsuriya, T. B. Edil

Abstract:

Microstructure and fabric of soils play an important role on structural properties e.g. stiffness and strength of compacted earthwork. Traditional quality control monitoring based on moisturedensity tests neither reflects the variability of soil microstructure nor provides a direct assessment of structural property, which is the ultimate objective of the earthwork quality control. Since stiffness and strength are sensitive to soil microstructure and fabric, any independent test methods that provide simple, rapid, and direct measurement of stiffness and strength are anticipated to provide an effective assessment of compacted earthen materials’ uniformity. In this study, the soil stiffness gauge (SSG) and the dynamic cone penetrometer (DCP) were respectively utilized to measure and monitor the stiffness and strength in companion with traditional moisture-density measurements of various earthen materials used in Thailand road construction projects. The practical earthwork quality control criteria are presented herein in order to assure proper earthwork quality control and uniform structural property of compacted earthworks.

Keywords: Dynamic cone penetrometer, moisture content, relative compaction, soil stiffness gauge, structural property.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1338826

References:

[1] A. Sawangsuriya, T. B. Edil, and P. J. Bosscher, “Modulus-suctionmoisture relationship for compacted soils,” Canadian Geotechnical Journal, Vol. 45, No. 7, 2008, pp. 973–983.
[2] S. F. Brown, M. P. O’Reilly, and S. C. Loach, “The relationship between California bearing ratio and elastic stiffness for compacted clays,” Ground Engineering, Vol. 23, No. 8, 1990, pp. 27–31.
[3] T. B. Edil and A. Sawangsuriya, Investigation of the DCP and SSG as Alternative Methods to Determine Subgrade Stability. Report No. 0092- 01-05, Wisconsin Department of Transportation, Madison, WI, 2005.
[4] S. M. Sargand, T. Masada, and D. L. Wasniak, “Variability of initial subgrade modulus at Ohio SHRP test road,” Constructing and Controlling Compaction of Earth Fills, ASTM STP 1384, 2000, pp. 274– 289.
[5] S. Nazarian and D. Yuan, “Quality control of compacted layers with field and laboratory seismic testing devices,” Constructing and Controlling Compaction of Earth Fills, ASTM STP 1384, 2000, pp. 311– 324.
[6] S.A. Fiedler, C. R. Nelson, E. F. Berkman, and A. F. DiMillio, “Soil stiffness gauge for soil compaction control,” Public Roads, U.S. Department of Transportation, Federal Highway Administration, 1998.
[7] A. Sawangsuriya and T. B. Edil, “Evaluating Stiffness and Strength of Pavement Materials,” Proceedings of the Institution of Civil Engineers- Geotechnical Engineering, Vol. 158, No. 4, 2005, pp. 217–230.
[8] T. B. Edil and A. Sawangsuriya, “Use of stiffness and strength for earthwork quality evaluation,” GeoShanghai Conference, Site and Geomaterial Characterization, ASCE, Geotechnical Special Publication, No. 149, Shanghai, China, 2006, pp. 80–87.
[9] Y. Taesiri, A. Sawangsuriya, S. Wachiraporn, and W. Sramoon, “Assessment of in-situ tests for stiffness and strength characteristic of pavement materials,” 13th REAAA Conference Korea 2009, Icheon, South Korea, 2009.
[10] S. Wachiraporn, A. Sawangsuriya, J. Sunitsakul, and W. Sramoon, “Stiffness and strength based in-place evaluation of compacted unbound materials,” Proceedings of Sessions of GeoShanghai 2010, Geotechnical Special Publication No. 203, Shanghai, China, 2010, pp. 347–354.
[11] S. Wachiraporn, Engineering Property-Based Compaction Control for Highway Construction, M.Eng. Thesis, Mahanakorn University of Technology, Bangkok, Thailand, 2008.