Simulating the Interaction between Groundwater and Brittle Failure in Open Pit Slopes

Authors: Janisse Vivas, Doug Stead, Davide Elmo, Charles Hunt

Abstract:

This paper presents the results of a study on the influence of varying percentages of rock bridges along a basal surface defining a biplanar failure mode. A pseudo-coupled-hydromechanical brittle fracture analysis is adopted using the state-of-the-art code Slope Model. Model results show that rock bridge failure is strongly influenced by the incorporation of groundwater pressures. The models show that groundwater pressure can promote total failure of a 5% rock bridge along the basal surface. Once the percentage of the rock bridges increases to 10 and 15%, although, the rock bridges are broken, full interconnection of the surface defining the basal surface of the biplanar mode does not occur. Increased damage is caused when the rock bridge is located at the daylighting end of the basal surface in proximity to the blast damage zone. As expected, some cracking damage is experienced in the blast damage zone, where properties representing a good quality controlled damage blast technique were assumed. Model results indicate the potential increase of permeability towards the blast damage zone.

Keywords: Slope model, lattice spring, blasting damage zone.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1110469

References:

[1] Read, J., Beale, G., 2014. Guidelines for Evaluating Water in Pit Slope Stability. CSIRO Publishing. Collingwood, Victoria, 510pp.
[2] Vivas, J. Groundwater Characterization and Modelling in Natural and Open Pit Rock Slopes. (M.Sc. Thesis), Simon Fraser University. Burnaby, BC, Canada.
[3] Sullivan, T. D., 2007. Hydromechanical coupling and pit slope movements." In: Slope Stability Proceedings of the International Symposium on Rock Stability in Open Pit Mining.
[4] Read, J., Stacey, P., 2009. Guidelines for Open Pit Slope Design. CSIRO Publishing. Collingwood, Victoria, 512pp.
[5] Taseko, 2012. Preliminary Pit Slope Design (No. VA101-266/27-1). Taseko Mines Limited Consulting, Vancouver, Canadá, 78 pp.
[6] Hoek, E., 2002a. Blasting damage in rock, RocScience, 8 pp. Available online: https://www.rocscience.com/hoek/references/H2002.pdf
[7] Robertson, A.M., 1970. The interpretation of geological factors for use in slope theory. Planning Open, in: Planning Open Pit Mines, Proceedings. Johannesburg, pp. 55–71.
[8] Diederichs, M.S., Kaiser, P.K., 1999. Tensile strength and abutment relaxation as failure control mechanisms in underground excavations. Int. J. Rock Mech. Min. Sci. Vol. 36, pp. 69–96. doi:10.1016/S0148- 9062(98)00179-X.
[9] Saiang, D., Nordlund, E., 2008. Numerical study of the mechanical behaviour of the damaged rock mass around an underground excavation, in: 5th International Conference and Exhibition on Mass Mining. Presented at the International Conference & Exhibition on Mass Mining, Lulea, Sweden, pp. 803–813.
[10] Coates, D. F. and Brown, A., 1961. “Stability of slopes at mines”, The Canadian Mining and Metallurgical Bulletin.
[11] Beale, G., Read, J., 2014. Guidelines for Evaluating Water in Pit Slope Stability. CRC Press, Australia.616 pp.
[12] Havaej, M., Stead, D., Lorig, L., Vivas, J., 2012. Modelling rock bridge failure and brittle fracturing in large open pit rock slopes, in: ARMA 2012. Presented at the 46th US Rock Mechanics / Geomechanics Symposium held in Chicago, IL, USA,, American Rock Mechanics Association, Chicago, IL, USA. 9 pp.
[13] Havaej, M., Wolter, A., Stead, D., Tuckey, Z., Lorig, L., Eberhardt, E., 2013.Incorporating brittle fracture into three-dimensional modelling of rock slopes. In: Proceedings of the 2013 International Symposium on Slope Stability in Open Pit. Mining and Civil Engineering, Brisbane, Australia., pp. 625–638.
[14] Jennings J. E. (1970). A mathematical theory for the calculation of the stability of open cast mines. In Van Rensburg, P. (Eds.), Planning open pit mines: Proceedings of the Symposium on the Theoretical Background to the Planning of Open Pit Mines with Special Reference to Slope Stability (pp. 87-102). Johannesburg, Republic of South Africa: Balkema (A.A.)
[15] Tuckey, Z., 2012. An Integrated Field Mapping-Numerical Modelling Approach to Characterising Discontinuity Persistence and Intact Rock Bridges in Large Open Pit Slopes (M.Sc. Thesis). Simon Fraser University. Burnaby, BC, Canada.
[16] Itasca Consulting Group, Inc., 2014. Slope Model Manual. Minneapolis, USA.
[17] Lorig LJ, Cundall PA, Damjanac B, Emam S. A three-dimensional model for rock slopes based on micromechanics. In: Proceedings of the 44th US Rock Mech Symp 5th US-Can Rock Mech Symp; 2010.
[18] Hoek, E., 2012. Blast Damage Factor D. In: Technical note for RocNews, February 2, 2012, Winter 2012 Issue, RocScience, pp. 6-8. Available from: www.rocscience.com/assets/files/uploadss/8584.pdf
[19] Zhang, L., 2013. Aspects of rock permeability. Frontiers of Structural and Civil Engineering. Vol. 7, pp. 102–116. doi:10.1007/s11709-013- 0201-2.