Study of Low Loading Heavier Phase in Horizontal Oil-Water Liquid-Liquid Pipe Flow

Authors: Aminu J. A. Koguna, Aliyu M. Aliyu, Olawale T. Fajemidupe, Yahaya D. Baba

Abstract:

Production fluids are transported from the platform to tankers or process facilities through transfer pipelines. Water being one of the heavier phases tends to settle at the bottom of pipelines especially at low flow velocities and this has adverse consequences for pipeline integrity. On restart after a shutdown, this could result in corrosion and issues for process equipment, thus the need to have the heavier liquid dispersed into the flowing lighter fluid. This study looked at the flow regime of low water cut and low flow velocity oil and water flow using conductive film thickness probes in a large diameter 4-inch pipe to obtain oil and water interface height and the interface structural velocity. A wide range of 0.1–1.0 m/s oil and water mixture velocities was investigated for 0.5–5% water cut. Two fluid model predictions were used to compare with the experimental results.

Keywords: Interface height, liquid-liquid flow, two-fluid model, water cut.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1110343

References:

[1] Al-Wahaibi, T., & Angeli, P. (2007). Transition between stratified and non-stratified horizontal oil-water flows. Part I: Stability analysis. Chemical Engineering Science, 62(11), 2915–2928. http://doi.org/10.1016/j.ces.2007.01.024
[2] Angeli, P., & Hewitt, G. F. (2000). Flow structure in horizontal oil-water flow. International Journal of Multiphase Flow, 26(7), 1117–1140. http://doi.org/10.1016/S0301-9322(99)00081-6
[3] Simmons, M. J. H., & Azzopardi, B. J. (2001). Drop size distributions in dispersed liquid–liquid pipe flow. International Journal of Multiphase Flow, 27(5), 843–859.
[4] Lovick, J., & Angeli, P. (2004). Droplet size and velocity profiles in liquid-liquid horizontal flows. Chemical Engineering Science, 59(15), 3105–3115. http://doi.org/10.1016/j.ces.2004.04.035
[5] Rodriguez, O. M. H., & Oliemans, R. V. a. (2006). Experimental study on oil-water flow in horizontal and slightly inclined pipes. International Journal of Multiphase Flow, 32(3), 323–343. http://doi.org/10.1016/j.ijmultiphaseflow.2005.11.001
[6] Brauner, N., & Moalem Maron, D. (1992). Flow pattern transitions in two-phase liquid-liquid flow in horizontal tubes. International Journal of Multiphase Flow, 18(1), 123–140. http://doi.org/10.1016/0301- 9322(92)90010-E.
[7] Brauner, N., Moalem Maron, D., & Rovinsky, J. (1998). A two-fluid model for stratified flows with curved interfaces. International Journal of Multiphase Flow, 24(6), 975–1004. http://doi.org/10.1016/S0301- 9322(98)00005-6
[8] Ullmann, A., Zamir, M., Gat, S., & Brauner, N. (2003). Multi-holdups in co-current stratified flow in inclined tubes. International Journal of Multiphase Flow, 29(10), 1565–1581.
[9] Coney, M. W. E. (1973). The theory and application of conductance probes for the measurement of liquid film thickness in two phase flow. Journal of Physics E: Scientific Instruments, 6(9)
[10] Sunder Raj, T., Chakrabarti, D. P., & Das, G. (2005). Liquid-Liquid Stratified Flow through Horizontal Conduits. Chemical Engineering & Technology, 28(8), 899–907. http://doi.org/10.1002/ceat.200500067