An Approximate Lateral-Torsional Buckling Mode Function for Cantilever I-Beams

Authors: H. Ozbasaran

Abstract:

Lateral torsional buckling is a global buckling mode which should be considered in design of slender structural members under flexure about their strong axis. It is possible to compute the load which causes lateral torsional buckling of a beam by finite element analysis, however, closed form equations are needed in engineering practice for calculation ease which can be obtained by using energy method. In lateral torsional buckling applications of energy method, a proper function for the critical lateral torsional buckling mode should be chosen which can be thought as the variation of twisting angle along the buckled beam. Accuracy of the results depends on how close is the chosen function to the exact mode. Since critical lateral torsional buckling mode of the cantilever I-beams varies due to material properties, section properties and loading case, the hardest step is to determine a proper mode function in application of energy method. This paper presents an approximate function for critical lateral torsional buckling mode of doubly symmetric cantilever I-beams. Coefficient matrices are calculated for concentrated load at free end, uniformly distributed load and constant moment along the beam cases. Critical lateral torsional buckling modes obtained by presented function and exact solutions are compared. It is found that the modes obtained by presented function coincide with differential equation solutions for considered loading cases.

Keywords: Buckling mode, cantilever, lateral-torsional buckling, I-beam.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1109906

References:

[1] S. P. Timoshenko, and J. M. Gere, Theory of Elastic Stability. 2nd ed., McGraw-Hill, 1961.
[2] H. Ozbasaran, “Finite differences approach for calculating elastic lateral torsional buckling moment of cantilever I sections,” Journal of Science and Technology - A - Applied Sciences and Technology, vol. 14, no. 2, pp. 143-152, 2013.
[3] H. Ozbasaran, R. Aydin, and M. Dogan, “An alternative design procedure for lateral-torsional buckling of cantilever I-beams,” Thin- Walled Structures, vol. 90, pp. 235-242, 2015.
[4] H. Ozbasaran, Analytical and Experimental Research of Lateral Torsional Buckling of Cantilever Steel I-Beams, PhD thesis (in Turkish), Eskisehir, Turkey: Eskisehir Osmangazi University, 2013
[5] D. H. Hodges, and D. A. Peters, “Lateral-torsional buckling of cantilevered elastically coupled composite strip- and I-beams,” International Journal of Solids and Structures, vol. 38, pp. 1585-1603, 2001.
[6] A. Andrade, and D. Camotim, “Lateral-torsional buckling of prismatic and tapered thin-walled open beams: assessing the influence of prebuckling deflections,” Steel and Composite Structures, vol. 4, no. 4, pp. 281-301, 2004.
[7] A. Andrade, and D. Camotim, “Lateral-torsional buckling of singly symmetric tapered beams: theory and applications,” Journal of Engineering Mechanics, vol. 131, pp. 586-597, 2005.
[8] A. Andrade, D. Camotim, and P. Providência e Costa, “On the evaluation of elastic critical moments in doubly and singly symmetric Isection cantilevers,” Journal of Constructional Steel Research, vol. 63, pp. 894-908, 2007.
[9] A. Andrade, D. Camotim, and P. Borges Dinis, “Lateral-torsional buckling of singly symmetric web-tapered thin-walled I-beams: 1D model vs. shell FEA,” Computational Structures Technology, vol. 85, no. 17-18, pp. 1343-1359, 2007.
[10] N. Challamel, and C. M. Wang, “Exact lateral–torsional buckling solutions for cantilevered beams subjected to intermediate and end transverse point loads,” Thin-Walled Structures, vol. 48, pp. 71-76, 2010.
[11] R. Goncalves, “A geometrically exact approach to lateral-torsional buckling of thin-walled beams with deformable cross-section,” Computers and Structures, vol. 106-107, pp. 9-19, 2012.
[12] A. B. Benyamina, S. A. Meftah, F. Mohri, and E. M. Daya, “Analytical solutions attempt for lateral torsional buckling of doubly symmetric webtapered I-beams,” Engineering Structures, vol. 56, pp. 1207-1219, 2013.
[13] H. Ozbasaran, “A parametric study on lateral torsional buckling of European IPN and IPE cantilevers,” International Journal of Civil, Architectural, Structural and Construction Engineering, vol. 8, no. 7, 2014.
[14] D. Sonck, and J. Belis, “Lateral-torsional buckling resistance of cellular beams,” Journal of Constructional Steel Research, vol. 105, pp. 119- 128, 2015.
[15] S. A. Ibrahim, A. K. Dessouki, and S. A. El-Sa’eed, “Lateral buckling behavior and strengthening techniques of coped steel I-beams,” Journal of Constructional Steel Research, vol. 108, pp. 11-22, 2015.
[16] M. Kucukler, L. Gardner, and L. Macorini, “Lateral-torsional buckling assessment of steel beams through a stiffness reduction method,” Journal of Constructional Steel Research, vol. 108, pp. 87-100, 2015.
[17] T. T. Nguyen, T. M. Chan, and J. T. Mottram, “Lateral-torsional buckling design for pultruded FRP beams,” Composite Structures, vol. 133, pp. 782-793, 2015.