Studying Frame-Resistant Steel Structures under Near Field Ground Motion

Authors: S. A. Hashemi, A. Khoshraftar

Abstract:

This paper presents the influence of the vertical seismic component on the non-linear dynamics analysis of three different structures. The subject structures were analyzed and designed according to recent codes. This paper considers three types of buildings: 5-, 10-, and 15-story buildings. The non-linear dynamics analysis of the structures with assuming elastic-perfectlyplastic behavior was performed using RAM PERFORM-3D software; the horizontal component was taken into consideration with and without the incorporation of the corresponding vertical component. Dynamic responses obtained for the horizontal component acting alone were compared with those obtained from the simultaneous application of both seismic components. The results show that the effect of the vertical component of ground motion may increase the axial load significantly in the interior columns and, consequently, the stories. The plastic mechanisms would be changed. The P-Delta effect is expected to increase. The punching base plate shear of the columns should be considered. Moreover, the vertical component increases the input energy when the structures exhibit inelastic behavior and are taller.

Keywords: Inelastic behavior, non-linear dynamic analysis, steel structure, vertical component.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1338482

References:

[1] J. Despsyrox, “Some lessons to be Draw from the El Asnam Earthquake of October10, 1980.” Proc. 8th World conference on Earthquake Engineering, San Francisco, California, July 1984.
[2] G. Warn, and A. Whittaker, “Vertical Earthquake Loads on Seismic Isolation Systems in Bridges.” J. Struct. Eng., 134(11), 1696–1704, 2008.
[3] W. D. Iwan, “Near-Field Consideration in Specification of Seismic Design Motion for Structure”, Proc. of the 10th European conference on Earthquake Engineering, Vienna, Austria, 28 August- 2 September1994.
[4] B. Hosseini Hashemi, and E. Abbassi, “Rational Suggestions for Vertical Component Requirement in 2800 Iranian Standard for Near- Fault Areas”, J. Seismol. Earthquake Eng., 10(4), 189-194, 2009.
[5] C.G. Salmon, and J.E. Johnson, Steel Structures: Design and Behavior, 4th ed. HarperCollins College, New York, USA, 1996.
[6] E. Kalkan, and P. Gülkan, “Empirical attenuation equations for vertical ground motion in Turkey”, Earthquake Spectra, 20(3), 853-882, 2004.
[7] A. Salazar, and A. Haldar, “Structural Responses Considering the Vertical Component of Earthquakes”, Computers and Structures, 2000 74,131-145.
[8] M. Hosseini, and M. Firoozi Nezamabadi, “A Study on the Effect of Vertical Ground Acceleration on the Seismic Response of Steel Building”, Proc. of the 13th WCEE, Vancouver, B.C., Canada, August 2004.
[9] S. G. Kim, C. J. Holub, and A. S. Elnashai, “Analytical Assessment of the Effect of Vertical Earthquake Motion on RC Bridge Piers”, J. Stru. Eng., 137 (2), 252-260, 2011.
[10] O.R. Owen, and E. Hinton, Finite Element in Plasticity: Theory and Practice. Pineridge Press, Swansea, UK, 1982.
[11] M. R. Horne, Plastic Theory of Structures, Nelson, London, UK, 1971.
[12] E. Kalkan, and V. Graizer, “Multi-component ground motion response spectra for coupled horizontal, vertical, angular accelerations, and tilt”, ISET J. Earthquake Technol., 44 (1), 259–284, 2007.
[13] E. B. Williamson, “Evaluation of Damage and P-D Effects for Systems under Earthquake Excitation”, J. Struct. Eng., 129(8), 1036-1046, 2003.
[14] A. K. Chopra, Dynamics of Structures: Theory and Applications to Earthquake Engineering, Prentice Hall, Upper Saddle River, New Jersey, USA, 1995.