Fluidised Bed Gasification of Multiple Agricultural Biomass Derived Briquettes

Authors: Rukayya Ibrahim Muazu, Aiduan Li Borrion, Julia A. Stegemann

Abstract:

Biomass briquette gasification is regarded as a promising route for efficient briquette use in energy generation, fuels and other useful chemicals. However, previous research has been focused on briquette gasification in fixed bed gasifiers such as updraft and downdraft gasifiers. Fluidised bed gasifier has the potential to be effectively sized to medium or large scale. This study investigated the use of fuel briquettes produced from blends of rice husks and corn cobs biomass, in a bubbling fluidised bed gasifier. The study adopted a combination of numerical equations and Aspen Plus simulation software, to predict the product gas (syngas) composition base on briquette density and biomass composition (blend ratio of rice husks to corn cobs). The Aspen Plus model was based on an experimentally validated model from the literature. The results based on a briquette size 32 mm diameter and relaxed density range of 500 to 650kg/m3, indicated that fluidisation air required in the gasifier increased with increase in briquette density, and the fluidisation air showed to be the controlling factor compared with the actual air required for gasification of the biomass briquettes. The mass flowrate of CO2 in the predicted syngas composition increased with an increase in air flow, in the gasifier, while CO decreased and H2 was almost constant. The ratio of H2 to CO for various blends of rice husks and corn cobs did not significantly change at the designed process air, but a significant difference of 1.0 was observed between 10/90 and 90/10 % blend of rice husks and corn cobs.

Keywords: Briquettes, fluidised bed, gasification, Aspen Plus, syngas.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1107211

References:

[1] Aspen Plus. Getting Started Building and Running a Process Model, Version Number: V7.2 July 2010, Copyright (c) 1981-2010 by Aspen Technology, Inc. All rights reserved.
[2] Aspen Plus. Getting Started Modeling Processes with Solids, Version Number: V7.2 July 2010, Copyright (c) 1981-2010 by Aspen Technology, Inc. All rights reserved.
[3] Basu P. Biomass Gasification and Pyrolysis, Practical Design and Theory, Elsevier Inc., (2010). The Boulevard, Langford Lane Kidlington, Oxford, OX5 1GB, UK
[4] Begum S., Rasul M.G., Akbar D., Cork D., An experiment and numerical investigation of fluidised bed gasification of solid waste, J. Energies 7 (2014) 43-61.
[5] Escudero D.R., "Bed height and material density effects on fluidized bed hydrodynamics" (2010) Graduate Theses and Dissertations, Digital Repository @ Iowa State University. Paper 11656.
[6] Lee J.M., Kim Y.J., Lee, W.J., Kim S.D., Coal-gasification kinetics derived from pyrolysis in a fluidized-bed reactor, J. Energy (1998) 23 475–488.
[7] Michailos S., Zabaniotou A., Simulation of Olive Kernel Gasification in a Bubbling Fluidized Bed Pilot Scale Reactor, J. Sustainable Bioenergy Systems, 2 (2012) 145-159.
[8] Muazu R.I., Stegemann J.A., Effects of operating variables on durability of fuel briquettes from rice husks and corn cobs, J. Fuel Processing Technology 133, (2015), 137-145.
[9] Nikoo, M.B., Mahinpey, N., Simulation of biomass gasification in fluidized bed reactor using ASPEN PLUS, J. Biomass Bioenergy (2008) 32 1245–1254.
[10] Ramos, G., García Ruiz, M., Prieto Marqués, J. J., and Guardiola Soler, J. (2002) "Minimum fluidization velocities for gas-solid 2d beds." Chemical Engineering and Processing, 41(9): 761-764.
[11] Han J. & Kim Heejoon (2008), The reduction and control technology of tar during biomass gasification/pyrolysis: An overview, journal of Renewable and Sustainable Energy Reviews, Volume 12, Pp: 397-416.
[12] Demirbas A., Trace metal concentrations in ashes from various types of biomass species, J. Energy Sources 25 (2003) 743–51.
[13] Jangsawang W., Gupta A.K., Kitagawa K. & Lee S.C., High Temperature Steam and Air Gasification of Non-woody Biomass Wastes. The 2nd Joint International Conference on “Sustainable Energy and Environment (SEE 2006)” Bangkok, Thailand, 1-7.
[14] Doherty, W.; Reynolds, A.; Kennedy, D. The effect of air preheating in a biomass CFB gasifier using ASPEN Plus simulation, J. Biomass Bioenergy 3 (2009) 1158–1167.
[15] Kannan P., Shoaibi A.A., Srinivasakannan C., Optimization of Waste Plastics Gasification Process Using Aspen-Plus, Gasification for Practical Applications, Dr. Yongseung Yun (Ed.) (2012), ISBN: 978- 953-51-0818-4, InTech, DOI: 10.5772/48754. Available from: http://www.intechopen.com/books/gasification-for-practicalapplications/ optimization-of-waste-plastics-gasification-process-usingaspen- plus
[16] Sridhar H. V., Sridhar G., Dasappa, S., Rajan, N. K. S., & Paul, P. J., Experience of using various biomass briquettes in IBG (Iisc Bioresidue Gasifier), Advanced Bio-residue Energy Technologies Society (2005), Combustion Gasification and Propulsion Laboratory, Department of Aerospace Engineering, Indian Institute of Science, Bangalore, India.
[17] Zhang L., Xu C.,& Champagne P., Overview of recent advances in thermo-chemical conversion of biomass, J. Energy Conversion and Management, volume 51, (2010) 969–982.
[18] Ruoppoloa G., Miccioa F., Brachib P., Picarellia A., Chironea R., Fluidized Bed Gasification of Biomass and Biomass/Coal Pellets in Oxygen and Steam Atmosphere, J. Chemical Engineering Transactions, volume 32 (2013) 595-600.
[19] Malatji P., Sampson N., & Meincken M.M., The technical pre-feasibility to use briquettes made from wood and agricultural waste for gasification in a downdraft gasifier for electricity generation, Energy in Southern Africa, volume 22 (2011) 2-7.
[20] Gaston K.R., Jarvis M.W., Pepiot P., Smith K.M, Frederick W.J., & Nimlos M.R., Biomass Pyrolysis and Gasification of Varying Particle Sizes in a Fluidized-Bed Reactor, J. Energy Fuels, volume 25 (2011) 3747–3757.
[21] Anis S, & Zainal Z.A. X., Tar reduction in biomass producer gas via mechanical, catalytic and thermal methods: A review, Renewable and Sustainable Energy Reviews, volume 15 (2011) 2355–2377.
[22] Tasma D., Uzuneanu K., & Panait T., The effect of excess air ratio on syngas produced by gasification of agricultural residues briquettes, J. Advances in Fluid Mechanics and Heat & Mass Transfer, (2012) 204- 207.
[23] Sivakumar K., Sivaraman B., Mohan N.K., Effectiveness of briquetting bio mass materials with different ratios in 10 kW down draft gasifier, International Journal of Engineering Science and Technology (IJEST) 3 (2011) 7959-7966.
[24] Zhong, W., Jin, B., Zhang, Y., Wang, X., and Xiao, R., "Fluidization of biomass particles in a gas−solid fluidized bed." Energy & Fuels, 22 (2008) 4170-4176.