Theoretical and Experimental Analysis of Hard Material Machining

Authors: Rajaram Kr. Gupta, Bhupendra Kumar, T. V. K. Gupta, D. S. Ramteke

Abstract:

Machining of hard materials is a recent technology for direct production of work-pieces. The primary challenge in machining these materials is selection of cutting tool inserts which facilitates an extended tool life and high-precision machining of the component. These materials are widely for making precision parts for the aerospace industry. Nickel-based alloys are typically used in extreme environment applications where a combination of strength, corrosion resistance and oxidation resistance material characteristics are required. The present paper reports the theoretical and experimental investigations carried out to understand the influence of machining parameters on the response parameters. Considering the basic machining parameters (speed, feed and depth of cut) a study has been conducted to observe their influence on material removal rate, surface roughness, cutting forces and corresponding tool wear. Experiments are designed and conducted with the help of Central Composite Rotatable Design technique. The results reveals that for a given range of process parameters, material removal rate is favorable for higher depths of cut and low feed rate for cutting forces. Low feed rates and high values of rotational speeds are suitable for better finish and higher tool life.

Keywords: Speed, feed, depth of cut, roughness, cutting force, flank wear.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1100392

References:

[1] B. John and B. Gerald, “The mechanisms of chip formation in machining hardened steels”, 2002, Trans. of ASME, 124, pp. 528-534.
[2] Y. K. Chou and C.J.Evans, “Process effects on white layer formation in hard turning”, 1998, Trans.of NAMRI/SME, 24, pp. 117-122.
[3] Meng Liu, Jun-ichiro, “Effect of tool nose radius and tool wear on residual stress distribution in hard turning of bearing steel”, 2004, Journal of Material Processing Technology, 150, pp. 234-241.
[4] H. David, “Turning to hard turning: it’s today’s cost-cutting alternative to grinding” 2006, Product Manager Advance Materials, Carboloy Inc. URL:http://www.manufacturingcenter.com/tooling/archives/1001/1001turning.asp
[5] B. Kristyanto, “Development of a predictive theory of machining for aluminum alloys using materials variable flow stress properties”, 2002, University of New South Wales, Mechanical and Manufacturing Eng., Ph.D. Thesis.
[6] Turgrul. Özel and TaylanAltan, "Determination of workpiece flow stress and friction at the chip-tool contact for high-speed cutting”, 2002, Int. Journal of Machine Tool Manufacture, 40, pp.133-152.
[7] Y. K. Chou and C.J.Evans, “Finish hard turning of powder metallurgy M50 steel”, 1997, Trans. of NAMRI/SME, 25, pp. 81~86.
[8] T.I.EI-Wardany, M.A. Elbestawi, M.H. Attia and E.Mohamed, “Surface finish in turning of hardened steel”, 1992, Eng. Surf. ASME PED-Vol. 62, 141-159.
[9] T. H. Lee and P. Mathew, “An experimental and theoretical comparison of machining non-heat treated and heat treated AISI 4140 steel”, 2005, 8th CIRP International Workshop on modeling of machining operations, Chemnitz, Germany, May 10-11, 2005, pp. 293-302.
[10] S.Y. Luo, Y.S. Liao and Y.Y. Tsai, “Wear characteristics in turning high hardness alloy steel by ceramic and CBN tools”, 1999, Journal of Material Processing and Technology88, pp. 114-121.
[11] Y.Huang and S. Y. Liang, “Cutting forces modeling considering the effect of tool thermal property-application to CBN hard turning” 2003, Int. Journal of Machine Tool Manufacture, 43, pp. 307-315.
[12] M.Xiao, K.Sato, S.Karube and T.Soutome, “The effect of tool nose radius in ultrasonic cutting of hard mental”, 2003, Int. Journal of Machine Tool Manufacture43, pp.1375~1382.
[13] K.Oishi, “Built-up edge elimination in mirror cutting of hardened steel” 1995, J. of Eng. Ind. 117, pp. 62~66.
[14] P.Munoz-Escalona and Z.Cassier, “Influence of the critical cutting speed on surface finish of turned steel” 1998, Wear, 218, pp. 103-109.
[15] J.Rech and A.Moisan, “Surface integrity in finish turning of case-hardened steels” 2003, Int. J. of Mach. Tools and Manuf. 43, pp. 543-550.
[16] M. Alauddin, M.A. El Baradie, M.S.J. Hashmi, “Optimization of surface finish in end milling Inconel 718” 1996, Journal of Material Processing and Technology 56, pp. 54 – 65.