Aerodynamic Analysis of Dimple Effect on Aircraft Wing

Authors: E. Livya, G. Anitha, P. Valli

Abstract:

The main objective of aircraft aerodynamics is to enhance the aerodynamic characteristics and maneuverability of the aircraft. This enhancement includes the reduction in drag and stall phenomenon. The airfoil which contains dimples will have comparatively less drag than the plain airfoil. Introducing dimples on the aircraft wing will create turbulence by creating vortices which delays the boundary layer separation resulting in decrease of pressure drag and also increase in the angle of stall. In addition, wake reduction leads to reduction in acoustic emission. The overall objective of this paper is to improve the aircraft maneuverability by delaying the flow separation point at stall and thereby reducing the drag by applying the dimple effect over the aircraft wing. This project includes both computational and experimental analysis of dimple effect on aircraft wing, using NACA 0018 airfoil. Dimple shapes of Semi-sphere, hexagon, cylinder, square are selected for the analysis; airfoil is tested under the inlet velocity of 30m/s and 60m/s at different angle of attack (5˚, 10˚, 15˚, 20˚, and 25˚). This analysis favors the dimple effect by increasing L/D ratio and thereby providing the maximum aerodynamic efficiency, which provides the enhanced performance for the aircraft.

Keywords: Airfoil, Boundary layer, Dimple effect, Flow separation, Stall reduction.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1099926

References:

[1] Bogdanovic-Jovanovic, B. Jasmina Zivojin M. Stamenkovic and Milos M. Kocic, 2012 “Experimental and Numerical Investigation of flow around a sphere with dimples for various flow regimes,” Thermal Science, Vol.16, No.4, pp.1013-102.
[2] Channu Raju and P.R. Viswananth, 2001 “Base Drag Reduction Caused by Riblets on a GAW aerofoil”, Journal of Aircraft Vol.No.6: Engineering Notes.
[3] Colin Smith, Jeffrey Ryen Kensrud., August 2010 “Determining dimple aerodynamic of Sports Balls in SITU” Washington State University.
[4] Deepenshu Srivastav, (2012), “Flow Control Over Aerofoils Using Different Shaped Dimples”, International Conference on Fluid Dynamics and Thermodynamics Technologies (FDTT) IPCSIT Vol.33 IACSIT Press, Singapore.
[5] Frank K. Lu and Adam J. Pierce, January 2011 “Review of Micro Vortex Generators in High Speed flow”, 49th AIAA Aerospace Sciences meeting including the New Horizons forum and Aerospace Exposition 4-7, Orlando, Florida.
[6] Guglienla. J and Michael S. Selig, July-August 1996 “Span Wise Variation in Profile Drag for Aerofoils at Low Reynolds Number”, Journal of Aircraft at Vol.33, No.4.
[7] Guglielmo. N, K.M. Butter , 1984 “Span wise variation in profile drag for aerofoil at low Reynolds number”, in Improvement Of Aerodynamic performance through Boundary Layer Control and High Lift Systems, Bussels, Belgium pp-1-1-26.