Nonlinear Finite Element Modeling of Unbonded Steel Reinforced Concrete Beams

Authors: Fares Jnaid, Riyad Aboutaha

Abstract:

In this paper, a nonlinear Finite Element Analysis (FEA) was carried out using ANSYS software to build a model able of predicting the behavior of Reinforced Concrete (RC) beams with unbonded reinforcement. The FEA model was compared to existing experimental data by other researchers. The existing experimental data consisted of 16 beams that varied from structurally sound beams to beams with unbonded reinforcement with different unbonded lengths and reinforcement ratios. The model was able to predict the ultimate flexural strength, load-deflection curve, and crack pattern of concrete beams with unbonded reinforcement. It was concluded that when the when the unbonded length is less than 45% of the span, there will be no decrease in the ultimate flexural strength due to the loss of bond between the steel reinforcement and the surrounding concrete regardless of the reinforcement ratio. Moreover, when the reinforcement ratio is relatively low, there will be no decrease in ultimate flexural strength regardless of the length of unbond.

Keywords: FEA, ANSYS, Unbond, Strain.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1099310

References:

[1] Eyre, J. R., and Nokhasteh, M. A. (1992). “Strength Assessment of Corrosion Damaged Reinforced Concrete Slabs and Beams.” Proceedings of the Institution of Civil Engineers, Structures and Buildings, 94(2), 197-203.
[2] Minkarah, I., and Ringo, B. C. (1981). “Behavior and repair of deteriorated reinforced concrete beams.” University of Cincinnati, Ohio, Transportation Research Record, 73-79.
[3] Smith, D. N., and Wood, L. A. (1989). “The structural performance of damaged elements,” Proceedings of the International Seminar on The Life of Structures, The Role of Physical Testing, Brighton.
[4] Cairns, J., and Zhao, Z. (1993). “Behavior of concrete beams with exposed reinforcement.” Proceedings of the Institution of Civil Engineers: structures and Buildings, 99(2), 141-154.
[5] Raoof, M., and Lin, Z. (1997). “Structural characteristics of RC beams with exposed main steel.” Proceedings of the Institution of Civil Engineers: structures and Buildings, 122(1), 35-51.
[6] Sharaf, H., and Soudki, K. (2002). “Strength Assessment of Reinforced Concrete Beams with Unbonded Reinforcement and Confinement with CFRP Wraps.” 4th Structural Specialty Conference of the Canadian Society for Civil Engineering, Montreal, Quebec, Canada, 1-10.
[7] Nokhasteh, M. A., Eyre, J. R., and Mcleish, A. (1992). “The effect of reinforcement corrosion on the strength of reinforced concrete members.” Structural Integrity Assessment, P. Stanley, ed., Elsevier Applied Science, London, England, 314–325.
[8] Lundgren, K. (2005). “Bond between ribbed bars and concrete. Part 1: Modified model.” Magazine of Concrete Research, 57(7), 371-382.
[9] Lundgren, K. (2005). “Bond between ribbed bars and concrete. Part 2: The effect of corrosion.” Magazine of Concrete Research, 57(7), 383- 396.
[10] Lundgren, K. (2007). “Effect of corrosion on the bond between steel and concrete: an overview.” Magazine of Concrete Research, 59(6), 447- 461.
[11] Xiaoming, Y., and Hongqian, Z. (2012). “Finite Element Investigation on Load Carrying Capacity of Corroded RC Beam Based on Bond-Slip.” Jordan Journal of Civil Engineering, 6(1), 134-146.
[12] ANSYS 13.0, “Help Manual.” ANSYS, Inc., Canonsburg, Pennsylvania.
[13] Willam, K.J., and Warnke, E.P. (1974). “Constitutive Model for Triaxial Behavior of Concrete.” Seminar on Concrete Structures Subjected to Triaxial Stresses, International Association of Bridge and Structural Engineering Conference, Bergamo, Italy.
[14] Kachlakev, D.I., Miller, T., Yim, S., Chansawat, K., and Potisuk, T. (2001). “Finite Element Modeling of Reinforced Concrete Structures Strengthened With FRP Laminates.” California Polytechnic State University, San Luis Obispo, CA and Oregon State University, Corvallis, OR for Oregon Department of Transportation.
[15] Wolanski, A.J. (2004). “Flexural behaviour of reinforced and prestressed concrete beams using finite element analysis.” M.S. thesis, Marquette University, Milwaukee, WI.
[16] Dahmani, L., Khennane, A., and Kaci, S. (2010). “Crack Identification in Reinforced Concrete Beams using Ansys Software.” Strength of Materials, 42(2), 232-240.
[17] Jnaid, F., and Aboutaha, R. S. (2014). "Residual Flexural Strength of RC Beams with Unbonded Reinforcement," ACI Structural Journal, 111(6), 1419-1430.
[18] ACI 318-11 (2011). “Building Code Requirements for Structural Concrete (ACI 318-11) and Commentary.” ACI 318R-11, American Concrete Institute, MI, USA.