Effects of Arcing in Air on the Microstructure, Morphology and Photoelectric Work Function of Ag- Ni (60/40) Contact Materials

Authors: Mohamed Akbi

Abstract:

The present work aims to throw light on the effects of arcing in air on the surface state of contact pastilles made of silvernickel Ag-Ni (60/40). Also, the photoelectric emission from these electrical contacts has been investigated in the spectral range of 196- 256 nm. In order to study the effects of arcing on the EWF, the metallic samples were subjected to electrical arcs in air, at atmospheric pressure and room temperature, after that, they have been introduced into the vacuum chamber of an experimental UHV set-up for EWF measurements. Both Fowler method of isothermal curves and linearized Fowler plots were used for the measurement of the EWF by the photoelectric effect. It has been found that the EWF varies with the number of applied arcs. Thus, after 500 arcs in air, the observed EWF increasing is probably due to progressive inclusion of oxide on alloy surface. Microscopic examination is necessary to get better understandings on EWF of silver alloys, for both virgin and arced electrical contacts.

Keywords: Ag-Ni contact materials, arcing effects, electron work function, Fowler methods, photoemission.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1099274

References:

[1] A. Pandey, P. Verma, and O.P. Pandey, “Comparison of Properties of Silver-Tin Oxide Electrical Contact Materials Through Different Processing Routes, ” Indian Journal of Engineering and Materials Sciences, Vol. 15, pp. 236–240, June 2008.
[2] P.C. Wingert and C.H. Leung, “The development of silver–based cadmium–free contact materials,” IEEE Transactions on Components, Hybrids, and Manufacturing Technology, Vol. 12, pp. 16–20, March 1989.
[3] R. Holm, Electric Contacts Handbook, ed R Holm, Springer, New York, 1967.
[4] K. H. Schröder, “Silver-Metal Oxides as Contact Materials,” IEEE Transactions on Components, Hybrids and Manufacturing Technology, Vol. 10, pp. 127–134, March 1987.
[5] Doduco GmbH, Data Book of Electrical Contacts, Doduco GmbH, Pforzheim, Germany, New edition (2012).
[6] M. Akbi, and A. Lefort, “Work function measurements of contact materials for industrial use,” J. Phys. D: Appl. Phys., Vol. 31, No. 11, pp. 1301−1308, Jun. 1998.
[7] A. Lefort , M. Akbi and M. J. Parizet, “Experimental determination of work function about silver alloys,” in Proc. SPIE, XVI International Symposium on Discharges and Electrical Insulation in Vacuum, Vol. 2259, Moscow-St. Petersburg, Russia, pp. 486−490, May 1994.
[8] N. D. Lang, and W. Kohn, “Theory of metal surfaces: work function,” Physical Review B, Vol. 3, No 4, pp. 1215–1223, Feb. 1971.
[9] S.C. Fain Jr., and J.M. McDavid, “Work function variation with alloy composition: Ag–Au,” Physical Review B, Vol. 9, No 12, pp. 5099– 5107, June 1974.
[10] L. Koller, M. Bizjak, and B. Praček, “Cleaning of thin passivation layers on Ag contact material by vacuum outgassing,” Vacuum, Vol. 60, pp. 175–178, 2001.
[11] H. B. Michaelson, “The work function of the elements and its periodicity,” Vol. 48, pp. 4729–4733, Nov. 1977.
[12] D. E. Eastman, ‘‘Photoelectric work function of transition, rare-earth, and noble metals,’’ Phys. Rev. B, vol. 2, N° 1, pp. 1–2, Jul. 1970.
[13] R. H. Fowler, “The analysis of photoelectric sensitivity curves for clean metals at various temperatures,” Phys. Rev., Vol. 38, Issue 1, pp. 45–46, Jul. 1931.
[14] M. Akbi, A. Bouchou, and M. Ferhat-Taleb, “Effects of surface treatments on photoelectric work function of silver–nickel alloys”, Vacuum, Vol. 101, pp. 257–266, Mar. 2014.
[15] M. Akbi, A. Bouchou and N. Zouache, “Effects of vacuum heat treatment on the photoelectric work function and surface morphology of multilayered silver–metal alloys”, Applied Surface Science , Vol. 303, pp. 131–139, June 2014.
[16] M. Akbi, “Effect of heat surface treatment on photoelectric work function of silver-metal alloys,” in Proc. European Conference on Heat Treatment and 21st IFHTSE Congress, 12–15 May 2014 Munich, Germany, pp. 489–496.
[17] M. Akbi, “A method for measuring the photoelectric work function of contact materials versus temperature,” IEEE Transactions on Components, Packaging and Manufacturing Technology TCPMT, Vol. 4, N°8, pp. 1293–1302, Aug. 2014.
[18] F. Wooten, and R.N. Stuart, “Fowler's hypothesis and the determination of photoemission thresholds”, Phys. Rev., Vol. 186, N° 2, pp. 592–593, Oct. 1969.
[19] C. N. Berglund, and W.E. Spicer, “Photoemission studies of copper and silver: theory,” Physical Review, Vol. 136, N° 4A, pp. A1030–A1044, Nov. 1964.
[20] A.J. Blodgett Jr., and W.E. Spicer, “Experimental determination of the density of states in nickel,” Phys. Rev., Vol. 146, N°2, pp. 390–402, June 1966.
[21] A. Lefort, M. Akbi and M. J. Parizet, “Electron emission of silver alloys used for breakers,” in Proc. 2nd Int. Conf. on Elect. Contacts, Arcs, Apparatus and their Applications, Xi’an, China, pp. 363–367, May 1993.
[22] V. S. Fomenko, Handbook of Thermionic Properties, Plenum, New York, 1966.
[23] L. A. Dubridge, “A Further experimental test of Fowler's theory of photoelectric emission,” Phys. Rev., pp. 108–118, Jan. 1932.
[24] E.U. Condon, “Note on the external photoelectric effect of semiconductors,” Phys. Rev., Vol. 54, pp. 1089–1091, Dec. 1938.
[25] L. Apker, E. Taft, J. Dickey, “Photoelectric emission and contact potentials of semiconductors,” Phys. Rev., Vol. 74, pp. 1462–1474, 1948.
[26] S. Anders and B. Jüttner, “Influence of residual gases on cathode spot behavior,” IEEE Trans. Plas. Sci., Vol.19, N°5, pp. 705–712, Oct. 1991.
[27] K. P. Nachtigall, and J. Mentel, “Measurement of arc spot formation delay times at cold cathodes in air,” IEEE Trans. Plas. Sci., Vol. 19, N°5, pp. 942–946, Oct. 1991.
[28] H. A. Bentounes, and J. Muniesa, “Electrode materials and recovery of the post-arc dielectric strength,” in Proc. 13th Conf. on Elect. Contacts, Lausanne, Switzerland, pp. 176–180, Sept. 1986.
[29] M. Lindermayer, “Effect of work function and ionization potential on the reignition voltage of arcs between Ag/metal oxide contacts,” IEEE Trans. Parts, Hybrids, Packag., vol. n°4, Mar. 1981, pp. 70-75.