Stabilization of γ-Sterilized Food-Packaging Materials by Synergistic Mixtures of Food-Contact Approval Stabilizers

Authors: Sameh A. S. Alariqi

Abstract:

Food is widely packaged with plastic materials to prevent microbial contamination and spoilage. Ionizing radiation is widely used to sterilize the food-packaging materials. Sterilization by γ-radiation causes degradation such as embrittlement, stiffening, softening, discoloration, odour generation, and decrease in molecular weight. Many antioxidants can prevent γ-degradation but most of them are toxic. The migration of antioxidants to its environment gives rise to major concerns in case of food packaging plastics. In this attempt, we have aimed to utilize synergistic mixtures of stabilizers which are approved for food-contact applications. Ethylene-propylene-diene terpolymer has been melt-mixed with hindered amine stabilizers (HAS), phenolic antioxidants and organophosphites (hydroperoxide decomposer). Results were discussed by comparing the stabilizing efficiency of mixtures with and without phenol system. Among phenol containing systems where we mostly observed discoloration due to the oxidation of hindered phenol, the combination of secondary HAS, tertiary HAS, organo-phosphite and hindered phenol exhibited improved stabilization efficiency than single or binary additive systems. The mixture of secondary HAS and tertiary HAS, has shown antagonistic effect of stabilization. However, the combination of organo-phosphite with secondary HAS, tertiary HAS and phenol antioxidants have been found to give synergistic even at higher doses of Gamma-irradiation. The effects have been explained through the interaction between the stabilizers. After γ-irradiation, the consumption of oligomeric stabilizer significantly depends on the components of stabilization mixture. The effect of the organo-phosphite antioxidant on the overall stability has been discussed.

Keywords: Ethylene-propylene-diene terpolymer, Synergistic mixtures, Gamma-sterilization and stabilization.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1099064

References:

[1] A. F. Booth, "Sterilization of Medical devices," Buffalo Grove, Interpharm Press, Illinois, 1979.
[2] M. Sturdevant, Plastics Engineering, vol. 47, pp. 27-32, 1991.
[3] M. Deng, S. W. Shalaby, J Appl Polym Sci, vol. 58, pp. 2111-2119, 1995.
[4] M. Goldman, M. Lee, R. Grousky, L. Pruitt, J Biomedical Material Research, vol. 37(1), pp. 43-50, 1997.
[5] J. Fishcher, E. A. Reeves, G. H. Isaac, K. A. Saum, W. A. Sanford, J Materials Science – Materials in medicine, vol. 8 (6), pp. 375-378, 1997.
[6] T. S. Dunn, J. L. Williams, J Indust Irrad Tech, vol. 1, pp. 33, 1983.
[7] D. J. Carlsson, S. Chmela, "Polymers and high-energy irradiation: degradation and stabilization". In: Jellinek HHG, editor. Degradation and stabilization of polymers, Amsterdam, Elsevier, vol. 1, 1983, ch. 4.
[8] P. P. Klemchuk, P. L. Horng, Polym Degrad Stab, vol. 34, pp. 333-346, 1991.
[9] H. Wilski, Radiat Phys Chem, vol. 29 pp. 1, 1987.
[10] P. Horng, P. Klemchuk, Plastics Engineering, pp. 35, April, 1984.
[11] N. Billingham "In Oxidation Inhibition in Organic Materials", J. Pospisil, P. P. Klemchuk, Eds, CRC Press, Boca Raton, pp. 2, 1990, ch. 6.
[12] S. Al-Malaika, M. R. J. Goonetilleka, G. Scott, Polym Degrad Stab,vol. 32, pp. 231, 1991.
[13] T. R. Crompton, "In Additive Migration from Plastics into Food", Pergamon Press, Oxford, 1979.
[14] J. D. McGuinness, Food Addit Contam, vol. 3(95), pp. 102, 1986.
[15] L. Clough, C. Norman, Billingham, T. Kenneth, Gillen, "Polymer durability degradation, stabilization, and lifetime prediction", Washington DC, American Chemical Society, (Advances in chemistry series, ISSN 0065-2393;249) 375e96, 1996, ch.25.
[16] J. Malik, A. Hrivik, D. Alexyova, Polym Degrad Stab, vol. 35, pp. 125, 1992.
[17] Gugumus F. Res Discl 1981;209:357.
[18] S. Chmela, P. Hrdlovic, Z. Manasek, Polym Degrdn Stab, vol. 11, pp. 233, 1985.
[19] L. Clough, C. Norman Billingham, T. Kenneth Gillen, "Polym durability degradation, stabilization, and lifetime prediction" Washington DC, American Chemical Society; (Advances in chemistry series, ISSN 0065- 2393;249) 455e70, 1996, ch. 29.
[20] T. H. Schmutz, R. King, J. R. Pauquet, "In the International Plastics Additives and Modifiers Conference, 1997; Addcon Asia , Paper 9.
[21] Kikkawa K. Polym Degrad Stab, vol. 49, pp. 135, 1995.
[22] Ciba specialty chemicals additives for polyolefins key products selection guide, Pub. no. 016269.00.040, Switzerland: Ciba Specialty Chemicals Inc.; http//www.cibasc.com
[23] D. J. Carlsson, D. M. Wiles, Macromolecues, vol. 2, pp. 597, 1969.
[24] “Annual Book of ASTM Standard”, American Society for Testing and Materials", Philadelphia,Vol. 8.02, 1988.
[25] F. W. Billmeyer, Sultzman, "Principles of colour Technol", Interscience, New Yourk, pp. 38, 1966.
[26] M. Hagiwara, T. Kagiya, "In Degradation and Stabilization of Polymers", vol. 1. ed. H. H. G. Jellinek. Elsevier, Amsterdam, 1983, ch. 8.
[27] L. Clough, C. Norman Billingham, T. Kenneth Gillen, "Polymer Durability Degradation, Stabilization, and Lifetime Prediction", Washington DC, pp. 359-374, 1996, ch. 24.
[28] Kawamura, Yoko, Sayama, Kayo, Yamada Takashi, Shokuhin Shosha, vol. 35 (1,2), pp. 7-14, 2000.
[29] Darren McFarlane, "Diffusion controlled investigation of the parameters responsible for the efficiency of hindered amine light stabilizers", Ph.D. Thesis, Department of Applied Chemistry, Faculty of Applied Science, Royal Melbourne Institute of Technology, Melbourne, Australia, August, 2002.
[30] D. W. Allen, D. A. Leathard, C. Smith, Chem Ind, pp. 854, 1987.
[31] J. Pospisil, Polym Degrad Stab, vol. 39, pp. 103, 1993.
[32] Vyprachticky D, Pospisil J. Polym Degrad Stab 1990;27: 227.
[33] K J. Murayama, Synth Org Chem, vol. 29, pp. 366, 1971.
[34] J. Pospisil, Polym Degrad Stab, vol. 34: pp. 85, 1991.
[35] J. Pospisil, Polym Adv Technol, vol. 3: pp. 443, 1992.
[36] P. Carloni, L. Greci, P. Stipa, C. Rizzoli, P. Sgatabotto, F. Ugozzoli, Polym Degrad Stab, vol. 39: pp. 73, 1993.
[37] J. R. Pauquet, "In Processing of Wire and Cable", the 42nd International Symposium, Eatontown, NJ, vol. 35, pp.105, 1992.
[38] W. O. Drake, J. R. Pauquet, R. V. Tedesco, H. Zweifel, Angew Makromol Chem, vol. 176/177, pp. 215-230 (3068), 1990.