Measurement of VIP Edge Conduction Using Vacuum Guarded Hot Plate

Authors: Bongsu Choi, Tae-Ho Song

Abstract:

Vacuum insulation panel (VIP) is a promising thermal insulator for buildings, refrigerator, LNG carrier and so on. In general, it has the thermal conductivity of 2~4 mW/m·K. However, this thermal conductivity is that measured at the center of VIP. The total effective thermal conductivity of VIP is larger than this value due to the edge conduction through the envelope. In this paper, the edge conduction of VIP is examined theoretically, numerically and experimentally. To confirm the existence of the edge conduction, numerical analysis is performed for simple two-dimensional VIP model and a theoretical model is proposed to calculate the edge conductivity. Also, the edge conductivity is measured using the vacuum guarded hot plate and the experiment is validated against numerical analysis. The results show that the edge conductivity is dependent on the width of panel and thickness of Al-foil. To reduce the edge conduction, it is recommended that the VIP should be made as big as possible or made of thin Al film envelope.

Keywords: Envelope, Edge conduction, Thermal conductivity, Vacuum insulation panel.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1337629

References:

[2] J. Kwon, C. Jang, H. Jung and T.H. Song, "Effective thermal conductivity of various filling materials for vacuum insulation panels," International Journal of Heat and Mass Transfer, vol. 52, pp. 5525-5532, 2009.
[3] A. Roth, Vacuum technology, Elsevier, 3rd ed., 1990, pp.37-58.
[4] Michael F. Modest, Radiative heat transfer, 2nd ed., Academic Press, 2003, pp. 451-454
[5] R. Caps, U. Heinemann, M. Ehrmanntraut and J. Fricke, "Evacuated insulation panels filled with pyrogenic silica powders: properties and applications", vol. 33, pp. 151-156, 2001.
[6] J. Fricke, H. Schwab, U. Heinemann, “Vacuum insulation panels – exciting thermal properties and most challenging applications,” International Journal of Thermophysics vol. 27, pp. 1123-1139, 2006.
[7] J. Xaman, L. Lira, J. Arce, “Analysis of the temperature distribution in a guarded hot plate apparatus for measuring thermal conductivity”, Applied Thermal Engineering, vol. 29, pp. 617-623, 2009.
[8] J. Kim, C. Jang and T.H. Song, “Measurement of Total Hemispherical Emissivity Using Vacuum Guarded Hot Plate”, Journal of Heat Transfer vol. 134, 114501, 2012.