The main purpose of this work is to experimentally investigate the effect of pipe orientation on two phase flow phenomenon. Flow pattern, void fraction and two phase pressure drop is measured in a polycarbonate pipe with an inside diameter of 12.7mm for inclination angles ranging from -20^{o<\/sup> to +20o<\/sup> using air-water fluid combination. The experimental data covers all flow patterns and the entire range of void fraction typically observed in two phase flow. The effect of pipe orientation on void fraction and two phase pressure drop is justified with reference to the change in flow structure and two phase flow behavior. In addition to this, the top performing void fraction and two phase pressure drop correlations available in the literature are presented and their performance is assessed against the experimental data in the present study and that available in the literature.<\/p>\r\n","references":"[1]\tH. D. Beggs and J. P. Brill, \"A Study of Two Phase Flow in Inclined Pipes,\" Journal of Petroleum Technology, vol. 25, pp. 607-617, 1973.\r\n[2]\tH. Mukherjee, \"An Experimental Study of Inclined Two Phase Flow,\" Ph.D. Thesis, Petroleum Engineering, The University of Tulsa, Tulsa, 1979.\r\n[3]\tS. Lips and J. P. Meyer, \"Experimental Study of Convective Condensation in an Inclined Smooth Tube. Part II: Inclination Effect on Pressure Drop and Void Fraction,\" International Journal of Heat and Mass Transfer, vol. 55, pp. 405-412, 2012.\r\n[4]\tS. L. Kokal and J. F. Stainslav, \"An Experimental Study of Two Phase Flow in Slightly Inclined Pipes II: Liquid Holdup and Pressure Drop,\" Chemical Engineering Science, vol. 44, pp. 681-693, 1989.\r\n[5]\tR. H. Bonnecaze, Erskine, and E. J. Greskovich, \"Holdup and Pressure Drop for Two Phase Slug Flow in Inclined Pipelines,\" AIChE, vol. 17, pp. 1109-1113, 1971.\r\n[6]\tS. Wongwises and M. Pipathttakul, \"Flow Pattern, Pressure Drop and Void Fraction of Gas-Liquid Two Phase Flow in an Inclined Narrow Annular channel,\" Experimental Thermal and Fluid Science, vol. 30, pp. 345-354, 2006.\r\n[7]\tA. R. Hasan, \"Void Fraction in Bubbly and Slug Flow in Downward Vertical and Inclined Systems,\" Society Of Petroleum Engineers Production and Facilities, vol. 10, pp. 172-176, 1995.\r\n[8]\tP. L. Spedding, J. k. Watterson, S. R. Raghunatham, and M. E. G. Ferguson, \"Two Phase Cocurrent Flow in Inclined Pipes,\" Internation Journal of Heat and Mass Transfer, vol. 41, pp. 4205 - 4228, 1998.\r\n[9]\tJ. Weisman and S. Y. Kang, \"Flow Pattern Transitions in Vertical and Upwardly Inclined Lines,\" International Journal of Multiphase Flow, vol. 7, pp. 271-291, 1981.\r\n[10]\tD. Barnea, \"A Unified Model for Predicting Flow Pattern Transitions for the Whole Range of Pipe Inclinations,\" International Journal of Multiphase Flow, vol. 13, pp. 1-12, 1987.\r\n[11]\tS. M. Bhagwat and A. J. Ghajar, \"A Flow Pattern Independent Drift Flux Model Based Void Fraction Correlation for a Wide Range of Gas-Liquid Two Phase Flow,\" International Journal of Multiphase Flow, vol. 59, pp. 186-205, 2014.\r\n[12]\tS. J. Kline and F. A. McClintock, \"Describing Uncertainities in Single Sample Experiments,\" Mechanical Engineering, vol. 1, pp. 3-8, 1953.\r\n[13]\tA. J. Ghajar and C. C. Tang, \"Importance of Non-Boiling Two Phase Flow Heat Transfer in Pipes for Industrial Applications,\" Heat Transfer Engineering, vol. 31, pp. 711-732, 2010.\r\n[14]\tG. F. Hewitt, C. J. Martin, and N. S. Wilkes, \"Experimental and Modeling Studies of Churn-Annular Flow in the Region Between Flow Reversal and the Pressure Drop Minimum,\" Physicochemical Hydrodynamics, vol. 6, pp. 69-86, 1985.\r\n[15]\tG. B. Wallis, One Dimensional Two Phase Flow: McGraw-Hill 1969.\r\n[16]\tW. Van't, \"Droplets in Inclined Annular Flow,\" Ph.D. Thesis Ph.D. Thesis, Delft University of Technology, 2008.\r\n[17]\tB. Chexal, G. S. Lellouche, J. Horowitz, and J. Healzer, \"A Void Fraction Correlation for Generalized Applications,\" Progress in Nuclear Energy, vol. 27, pp. 255-295, 1992.\r\n[18]\tL. E. Gomez, O. Shoham, Z. Schmidt, R. N. Choshki, and T. Northug, \"Unified Mechanistic Model for Steady State Two Phase Flow: Horizontal to Upward Vertical Flow,\" Society of Petroleum Engineers, vol. 5, pp. 339-350, 2000.\r\n[19]\tE. J. Greskovich and W. T. Cooper, \"Correlation and Prediction of Gas-Liquid Holdups in Inclined Upflows,\" AIChE, vol. 21, pp. 1189-1192, 1975.\r\n[20]\tM. A. Woldesemayat and A. J. Ghajar, \"Comparison of Void Fraction Correlations for Different Flow Patterns in Horizontal and Upward Inclined Pipes,\" International Journal of Multiphase Flow, vol. 33, pp. 347-370, 2007.\r\n[21]\tC. F. Colebrook, \"Turbulent Flow in Pipes, with Particular Reference to the Transition between the Smooth and Rough Pipe Laws,\" Journal of Institute of Civil Engineering, vol. 11, pp. 1938-1939, 1939.\r\n[22]\tS. Z. Rouhani and E. Axelsson, \"Calculation of Void Volume Fraction in the Subcooled and Quality Boiling Regions,\" International Journal of Heat and Mass Transfer, vol. 13, pp. 383-393, 1970.\r\n[23]\tR. W. Lockhart and R. C. Martinelli, \"Proposed Correlation of Data for Isothermal Two Phase, Two Component Flow in Pipes,\" Chemical Engineering Progress, vol. 45, pp. 39-48, 1949.\r\n[24]\tS. L. Smith, \"Void Fraction in Two Phase Flow: A Correlation Based on an Equal Velocity Head Model,\" Institute of Mechanical Engineers, vol. 184,Part 1, pp. 647-657, 1969.\r\n[25]\tA. Cioncolini and J. R. Thome, \"Void Fraction Prediction in Annular Two Phase Flow,\" International Journal of Multiphase Flow, vol. 43, pp. 72-84, 2012.\r\n[26]\tM. Ottens, H. C. J. Hoefsloot, and P. J. Kamersma, \"Correlations Predicting Liquid Holdup and Pressure Gradient in Steady State Nearly Horizontal Cocurrent Gas-Liquid Pipe Flow,\" Institution of Chemical Engineers, Trans. of IChemE, vol. 79, pp. 581-592, 2001.\r\n[27]\tA. J. Ghajar and S. M. Bhagwat, \"Effect of Void Fraction and Two-Phase Dynamic Viscosity Models on Prediction of Hydrostatic and Frictional Pressure Drop in Vertical Upward Gas-Liquid Two Phase Flow,\" Heat Transfer Engineering, vol. 34, pp. 1044-1059, 2013.\r\n[28]\tA. Permoli, D. Francesco, and A. Prima, \"An Emperical Correlation for Evaluating Two Phase Mixture Density Under Adiabatic Conditions,\" presented at the European Two Phase Flow group Meeting Milan, Italy, 1970.\r\n[29]\tH. Blasius, \"Das Anhlichkeitsgesetz bei Reibungsvorgangen in Flussikeiten \" Gebiete Ingenieurw, vol. 131, 1913.\r\n[30]\tS. W. Churchill, \"Friction Factor Equation Spans all Fluid- Flow Regimes,\" Chemical Engineering vol. 7, pp. 91-92, 1977.\r\n[31]\tD. R. H. Beattie and P. B. Whalley, \"A Simple Two-Phase Frictional Pressure Drop Calculation Method,\" International Journal of Multiphase Flow: Bried Communication, vol. 8, pp. 83-87, 1982.\r\n[32]\tM. M. Awad and Y. S. Muzychka, \"Effective Property Models for Homogeneous Two-Phase Flows,\" Experimental Thermal and Fluid Science, vol. 33, pp. 106-113, 2008.\r\n[33]\tJ. M. Quiben and J. R. Thome, \"Flow Pattern based Two Phase Frictional Presure Drop Model for Horizontal Tubes. Part I: Diabtic and Adiabatic Experimental Study,\" International Journal of Heat and Fluid Flow, vol. 28, pp. 1049-1059, 2007.\r\n[34]\tL. Sun and K. Mishima, \"Evaluation Analysis of Prediction Methods for Two Phase Flow Pressure Drop in Mini Channels,\" International Journal of Multiphase Flow, vol. 35, pp. 47-54, 2009.\r\n[35]\tY. Xu, X. Fang, X. SU, Z. Zhou, and W. Chen, \"Evaluation of Frictional Pressure Drop Correlations for Two-Phase Flow in Pipes,\" Nuclear Engineering and Design, vol. 253, pp. 86-97, 2012.\r\n[36]\tW. W. Akers, A. Deans, and O. K. Crossee, \"Condensing Heat Transfer Within Horizontal Tubes,\" Chemical Engineering Progress, vol. 55, pp. 171-176, 1959.\r\n[37]\tS. Lin, C. C. K. Kwok, R. Y. Li, Z. H. Chen, and Z. Y. Chen, \"Local Frictional Pressure Drop during Vaporization of R12 through Capillary Tubes,\" International Journal of Multiphase Flow, vol. 17, pp. 95-102, 1991.\r\n[38]\tW. H. McAdams, W. K. Woods, and L. V. Heroman, \"Vaporization Inside Horizontal Tubes - II Benzene Oil Mixtures,\" Trans. of ASME, vol. 64, pp. 193-200, 1942.\r\n[39]\tA. Ciccihitti, C. Lombardi, M. Silvestri, R. Soldaini, and G. Zavatarelli, \"Two-Phase Cooling Experiments: Pressure Drop, Heat Transfer and Burnout Measurments,\" Energ. Nucl. , vol. 7, pp. 407-429, 1960.\r\n[40]\tW. F. Davidson, P. H. Hardie, C. G. R. Humphreys, A. A. Markson, A. R. Mumford, and T. Ravese, \"Studies of Heat Transmission thorugh Boiler Tubing at Pressures from 500-3300 lbs,\" Trans. of ASME, vol. 65, pp. 553-591, 1943.\r\n[41]\tA. E. Dukler, M. Wicks, and R. G. Cleveland, \"Frictional Pressure Drop in Two Phase Flow: Part A and B,\" AIChE, vol. 10, pp. 38-51, 1964.\r\n[42]\tM. Fourar and S. Boris, \"Experimental Study of Air Water Two Phase Flow Through a Fracture,\" International Journal of Multiphase Flow, vol. 4, pp. 621-637, 1995.\r\n[43]\tF. Garcia, R. Garcia, J. C. Padrino, C. Mata, J. L. Trallero, and D. D. Joseph, \"Power Law and Composite Power Law Friciton Factor Correlations for Laminar Turbulent Gas Liquid Flow in Horizontal Pipe Lines,\" International Journal of Multiphase Flow, vol. 29, pp. 1605-1624, 2003.\r\n\r\n","publisher":"World Academy of Science, Engineering and Technology","index":"Open Science Index 90, 2014"}}