Large Eddy Simulation of Compartment Fire with Gas Combustible
Commenced in January 2007
Frequency: Monthly
Edition: International
Paper Count: 32797
Large Eddy Simulation of Compartment Fire with Gas Combustible

Authors: Mliki Bouchmel, Abbassi Mohamed Ammar, Kamel Geudri, Chrigui Mouldi, Omri Ahmed

Abstract:

The objective of this work is to use the Fire Dynamics Simulator (FDS) to investigate the behavior of a kerosene small-scale fire. FDS is a Computational Fluid Dynamics (CFD) tool developed specifically for fire applications. Throughout its development, FDS is used for the resolution of practical problems in fire protection engineering. At the same time FDS is used to study fundamental fire dynamics and combustion. Predictions are based on Large Eddy Simulation (LES) with a Smagorinsky turbulence model. LES directly computes the large-scale eddies and the sub-grid scale dissipative processes are modeled. This technique is the default turbulence model which was used in this study. The validation of the numerical prediction is done using a direct comparison of combustion output variables to experimental measurements. Effect of the mesh size on the temperature evolutions is investigated and optimum grid size is suggested. Effect of width openings is investigated. Temperature distribution and species flow are presented for different operating conditions. The effect of the composition of the used fuel on atmospheric pollution is also a focus point within this work. Good predictions are obtained where the size of the computational cells within the fire compartment is less than 1/10th of the characteristic fire diameter.

Keywords: Large eddy simulation, Radiation, Turbulence, combustion, pollution.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1092217

Procedia APA BibTeX Chicago EndNote Harvard JSON MLA RIS XML ISO 690 PDF Downloads 2132

References:


[1] G. Yeoh, R. Yuen, and W. Kwok, "Modelling combustion, radiation and soot processes in compartment fires,” Build Environ, vol. 38, pp. 593–85, 2003.
[2] H. you, and G. Faeth, "Turbulent combustion,” Combust Flame, vol. 38, pp. 261–44, 1982
[3] B. Morton, "Modeling fires plumes,” Proc 10th International Symposium on Combustion, pp. 973–982.
[4] V. Novozhilov, "Computational fluid dynamics modeling of compartment fires,” Proc. Energy. Combus. Sci, vol. 27, pp. 61–66, 2001.
[5] E. Zukoski, "Properties of fire plumes,” San Diego-Academic Press, vol. 50, pp. 4073-4079, 1995.
[6] V. Novozhilov, B. Moghtaderi, and D. Fletcher, "Computational fluid dynamics modeling of wood combustion,” Fire. Saf, vol. 27, pp. 69–84, 1996.
[7] W. Sirignano, "Fuel droplet vaporization and spray combustion theory,” Proc. Energy Combustion, vol. 9, pp. 291–322, 1983.
[8] I. Kennedy, "Models of soot formation and oxidation,” Proc. Energy. Combustion, vol. 23, pp. 95–132, 1997.
[9] V. Novozhilov, "Validation of fire dynamics simulator (fds) for forced and natural convection flows,” Proc. Energy. Combustion, Vol. 27, pp. 39–54, 2006.
[10] U. Köylü, G. Fletcher "Carbon Monoxide and soot emissions from liquid fuel,” Combustion Flame, vol. 87, pp. 61–76, 1991.
[11] k. McGrattan, "Fire Dynamic Similator (Version 4) Technical Reference Guide. National Institute of standards and Technology,” National Institute of standards and Technology, Special Publication 1018, 2006.
[12] J. Smagorinsky, "General Circulation Experiments with the Primitive Equations,” Monthly Weather Review, vol 3, pp. 99–164, 1963.
[13] B. Merci, "Numerical simulations of full-scale enclosure fires in a small compartment with natural roof ventilation,” Fire. Safety, vol. 43, pp. 495-511, 2008.
[14] D. Anderson, J. Tannehill, and R. Pletcher, "Computational Fluid Mechanics and Heat Transfer,” Hemisphere Publishing Corporation, Philadelphia,1984.
[15] K. McGrattan, H. Baum, and R. Rehm, "Fire dynamics simulator user’s guide,” National Institute of Standards and Technology, 2001.
[16] H. Baum, K. Mcgrattan, and H. Baum, "Simulation of Large Industrial Outdoor Fires,” Proc of the Sixth International Symposium Association for Fire Safety Science, 2000.
[17] W. Mell, K. Mcgrattan, and H. Baum, Proc. Combust, Vol. 26. pp. 1523–30, 1996.
[18] C. Huggett, "Estimation of the rate of heat release by means of oxygen consumption measurements,” Fire. Mater, vol. 4, pp. 61–5., 1980.
[19] P. Smardz, and V. Novozhilov, "Validation of Fire Dynamics Simulator (FDS) for forced and natural convection flows,” University of Ulster, October 2006.