@article{(Open Science Index):https://publications.waset.org/pdf/9997749, title = {Extraction of Polystyrene from Styrofoam Waste: Synthesis of Novel Chelating Resin for the Enrichment and Speciation of Cr(III)/Cr(VI) Ions in Industrial Effluents}, author = {Ali N. Siyal and Saima Q. Memon and Latif Elçi and Aydan Elçi}, country = {}, institution = {}, abstract = {Polystyrene (PS) was extracted from Styrofoam (expanded polystyrene foam) waste, so called white pollutant. The PS was functionalized with N,N- Bis(2-aminobenzylidene)benzene-1,2-diamine (ABA) ligand through an azo spacer. The resin was characterized by FT-IR spectroscopy and elemental analysis. The PS-N=N-ABA resin was used for the enrichment and speciation of Cr(III)/Cr(VI) ions and total Cr determination in aqueous samples by flame atomic absorption spectrometry (FAAS). The separation of Cr(III)/Cr(VI) ions was achieved at pH 2. The recovery of Cr(VI) ions was achieved ≥ 95.0% at optimum parameters: pH 2; resin amount 300mg; flow rates 2.0mL min-1 of solution and 2.0mL min-1 of eluent (2.0mol L-1 HNO3). Total Cr was determined by oxidation of Cr(III) to Cr(VI) ions using H2O2. The limit of detection (LOD) and quantification (LOQ) of Cr(VI) were found to be 0.40 and 1.20μg L-1, respectively with preconcentration factor of 250. Total saturation and breakthrough capacitates of the resin for Cr(IV) ions were found to be 0.181 and 0.531mmol g-1, respectively. The proposed method was successfully applied for the preconcentration/speciation of Cr(III)/Cr(VI) ions and determination of total Cr in industrial effluents. }, journal = {International Journal of Environmental and Ecological Engineering}, volume = {8}, number = {3}, year = {2014}, pages = {212 - 215}, ee = {https://publications.waset.org/pdf/9997749}, url = {https://publications.waset.org/vol/87}, bibsource = {https://publications.waset.org/}, issn = {eISSN: 1307-6892}, publisher = {World Academy of Science, Engineering and Technology}, index = {Open Science Index 87, 2014}, }