Design of Seismically Resistant Tree-Branching Steel Frames Using Theory and Design Guides for Eccentrically Braced Frames

Authors: R. Gary Black, Abolhassan Astaneh-Asl

Abstract:

The International Building Code (IBC) and the  California Building Code (CBC) both recognize four basic types of  steel seismic resistant frames; moment frames, concentrically braced  frames, shear walls and eccentrically braced frames. Based on  specified geometries and detailing, the seismic performance of these  steel frames is well understood. In 2011, the authors designed an  innovative steel braced frame system with tapering members in the  general shape of a branching tree as a seismic retrofit solution to an  existing four story “lift-slab” building. Located in the seismically  active San Francisco Bay Area of California, a frame of this  configuration, not covered by the governing codes, would typically  require model or full scale testing to obtain jurisdiction approval.  This paper describes how the theories, protocols, and code  requirements of eccentrically braced frames (EBFs) were employed  to satisfy the 2009 International Building Code (IBC) and the 2010  California Building Code (CBC) for seismically resistant steel frames  and permit construction of these nonconforming geometries.

 

Keywords: Eccentrically Braced Frame, Lift Slab Construction, Seismic Retrofit, Shear Link, Steel Design.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1090982

References:

[1] D. Kaminetzky, Design and Construction Failures: Lessons from Forensic Investigations. New York: McGraw-Hill. pp. 78–85, 1991.
[2] AISC, Specifications for Structural Steel Buildings, American Institute of Steel Construction Inc., Chicago, IL, 2010.
[3] AISC.Seismic Provisions for Structural Steel Buildings – ASCE 341, American Institute of Steel Construction Inc., Chicago, IL, 2010.
[4] ASCE. Minimum Design Loads for Buildings and Other Structures – ASCE 7-10, American Society of Civil Engineering, Reston, VA, 2010.
[5] E.P. Popov, and R.G. Black, "Steel Struts under Severe Cyclic Loadings." J. of the Structural Division, ASCE vol. 107, no ST9, Sept. 1981, pp. 1857-1881.
[6] J. Malley, and E.P. Popov, "Shear Links in Eccentrically Braced Frames.” J. of Structural. Engineering, ASCE vol. 110, no. 9, Sept. 1984, pp. 2275–2295.
[7] D.N. Manheim "On the Design of Eccentrically Braced Frames”, Doctoral Dissertation, University of California, Berkeley, 1982.
[8] N. Mansour, C. Christopoulos, and R. Tremblay, "Experimental performance of full-scale eccentrically braced frames with replaceable shear links,” Proceedings, STESSA Conference, Behaviour of Steel Structures in Seismic Areas: STESSA 2006, 5th International Conference on Behavior of Steel Structures in Seismic Areas.
[9] R.G. Black, "Design of Concrete Tracery Trusses to Define Architectural Space.” J. of Architectural Engineering, ASCEvol. 1, no 1, March 1995.
[10] E.L. Wilson. Structural Analysis Program, SAP (Version 14) (Computer software), Computers and Structures, Inc., Berkeley, CA 1963 to 2013.