@article{(Open Science Index):https://publications.waset.org/pdf/9677,
	  title     = {Effect of Dry Cutting on Force and Tool Life When Machining Aerospace Material},
	  author    = {K.Kadirgama and  M.M.Noor and  K.A. Abou-El-Hossein and  H.H.Habeeb and  M.M. Rahman and  B.Mohamad and 
R.A. Bakar},
	  country	= {},
	  institution	= {},
	  abstract     = {Cutting fluids, usually in the form of a liquid, are
applied to the chip formation zone in order to improve the cutting
conditions. Cutting fluid can be expensive and represents a biological
and environmental hazard that requires proper recycling and
disposal, thus adding to the cost of the machining operation. For
these reasons dry cutting or dry machining has become an
increasingly important approach; in dry machining no coolant or
lubricant is used. This paper discussed the effect of the dry cutting on
cutting force and tool life when machining aerospace materials
(Haynes 242) with using two different coated carbide cutting tools
(TiAlN and TiN/MT-TiCN/TiN). Response surface method (RSM)
was used to minimize the number of experiments. ParTiAlN Swarm
Optimisation (PSO) models were developed to optimize the
machining parameters (cutting speed, federate and axial depth) and
obtain the optimum cutting force and tool life. It observed that
carbide cutting tool coated with TiAlN performed better in dry
cutting compared with TiN/MT-TiCN/TiN. On other hand, TiAlN
performed more superior with using of 100 % water soluble coolant.
Due to the high temperature produced by aerospace materials, the
cutting tool still required lubricant to sustain the heat transfer from
the workpiece.},
	    journal   = {International Journal of Aerospace and Mechanical Engineering},
	  volume    = {4},
	  number    = {11},
	  year      = {2010},
	  pages     = {1222 - 1226},
	  ee        = {https://publications.waset.org/pdf/9677},
	  url   	= {https://publications.waset.org/vol/47},
	  bibsource = {https://publications.waset.org/},
	  issn  	= {eISSN: 1307-6892},
	  publisher = {World Academy of Science, Engineering and Technology},
	  index 	= {Open Science Index 47, 2010},