Hamad K. Al-Khalid and Ayman M. Alaskari and Samy E. Oraby
Hardness Variations as Affected by Bar Diameter of AISI 4140 Steel
609 - 615
2011
5
3
International Journal of Mechanical and Mechatronics Engineering
https://publications.waset.org/pdf/9476
https://publications.waset.org/vol/51
World Academy of Science, Engineering and Technology
Hardness of the widely used structural steel is of vital
importance since it may help in the determination of many
mechanical properties of a material under loading situations. In order
to obtain reliable information for design, properties homogeneity
should be validated. In the current study the hardness variation over
the different diameters of the same AISI 4140 bar is investigated.
Measurements were taken on the two faces of the stock at equally
spaced eight sectors and fifteen layers. Statistical and graphical
analysis are performed to asses the distribution of hardness
measurements over the specified area. Hardness measurements
showed some degree of dispersion with about ± 10 of its nominal
value provided by manufacturer. Hardness value is found to have a
slight decrease trend as the diameter is reduced. However, an
opposite behavior is noticed regarding the sequence of the sector
indicating a nonuniform distribution over the same area either on the
same face or considering the corresponding sector on the other face
(cross section) of the same material bar.
Open Science Index 51, 2011