@article{(Open Science Index):https://publications.waset.org/pdf/6229,
	  title     = {Surface Roughness and MRR Effect on Manual Plasma Arc Cutting Machining},
	  author    = {R. Bhuvenesh and  M.H. Norizaman and  M.S. Abdul Manan},
	  country	= {},
	  institution	= {},
	  abstract     = {Industrial surveys shows that manufacturing
companies define the qualities of thermal removing process based on
the dimension and physical appearance of the cutting material
surface. Therefore, the roughness of the surface area of the material
cut by the plasma arc cutting process and the rate of the removed
material by the manual plasma arc cutting machine was importantly
considered. Plasma arc cutter Selco Genesis 90 was used to cut
Standard AISI 1017 Steel of 200 mm x100 mm x 6 mm manually
based on the selected parameters setting. The material removal rate
(MRR) was measured by determining the weight of the specimens
before and after the cutting process. The surface roughness (SR)
analysis was conducted using Mitutoyo CS-3100 to determine the
average roughness value (Ra). Taguchi method was utilized to
achieve optimum condition for both outputs studied. The
microstructure analysis in the region of the cutting surface is
performed using SEM. The results reveal that the SR values are
inversely proportional to the MRR values. The quality of the surface
roughness depends on the dross peak that occurred after the cutting
process.},
	    journal   = {International Journal of Industrial and Manufacturing Engineering},
	  volume    = {6},
	  number    = {2},
	  year      = {2012},
	  pages     = {459 - 462},
	  ee        = {https://publications.waset.org/pdf/6229},
	  url   	= {https://publications.waset.org/vol/62},
	  bibsource = {https://publications.waset.org/},
	  issn  	= {eISSN: 1307-6892},
	  publisher = {World Academy of Science, Engineering and Technology},
	  index 	= {Open Science Index 62, 2012},
	}