@article{(Open Science Index):https://publications.waset.org/pdf/16880,
	  title     = {Tool Wear of (Ti,W,Si)N-Coated WC-Ni-Based Cemented Carbide in Cutting Hardened Steel},
	  author    = {Tadahiro Wada and  Shinichi Enoki and  Hiroyuki Hanyu},
	  country	= {},
	  institution	= {},
	  abstract     = {In this study, WC-Ni-based cemented carbides having different nickel contents were used as the substrate for cutting tool materials. Hardened steel was turned by a (Ti,W,Si)N-coated WC-Ni-based cemented carbide tool, and the tool wear was experimentally investigated. The following results were obtained: (1) In the (Ti,W,Si)N-coated WC-Ni-based cemented carbide, the hardness of the coating film was not much different from the content of the binding material, Ni, and the adhesion strength increased with a decrease in Ni content. (2) There is little difference between the wear progress of the (Ti,W,Si)N-coated WC-7%Ni-based cemented carbide tool and that of the (Ti,W,Si)N-coated WC-6%Co-based cemented carbide tool. (3) The wear progress of the (Ti,W,Si)N-coated WC-Ni-based cemented carbide became slower with a decrease in Ni content.

From the above, it is has become clear that WC-Ni-based cemented carbide can be used as a substrate for cutting tool materials.
},
	    journal   = {International Journal of Mechanical and Mechatronics Engineering},
	  volume    = {7},
	  number    = {9},
	  year      = {2013},
	  pages     = {1877 - 1881},
	  ee        = {https://publications.waset.org/pdf/16880},
	  url   	= {https://publications.waset.org/vol/81},
	  bibsource = {https://publications.waset.org/},
	  issn  	= {eISSN: 1307-6892},
	  publisher = {World Academy of Science, Engineering and Technology},
	  index 	= {Open Science Index 81, 2013},
	}