WASET
	@article{(Open Science Index):https://publications.waset.org/pdf/1636,
	  title     = {Effect of Using Stone Cutting Waste on the Compression Strength and Slump Characteristics of Concrete},
	  author    = {Kamel K. Alzboon and  Khalid N.Mahasneh},
	  country	= {},
	  institution	= {},
	  abstract     = {The aim of this work is to study the possible use of
stone cutting sludge waste in concrete production, which would
reduce both the environmental impact and the production cost .Slurry
sludge was used a source of water in concrete production, which was
obtained from Samara factory/Jordan, The physico-chemical and
mineralogical characterization of the sludge was carried out to
identify the major components and to compare it with the typical
sand used to produce concrete. Samples analysis showed that 96% of
slurry sludge volume is water, so it should be considered as an
important source of water. Results indicated that the use of slurry
sludge as water source in concrete production has insignificant effect
on compression strength, while it has a sharp effect on the slump
values. Using slurry sludge with a percentage of 25% of the total
water content obtained successful concrete samples regarding slump
and compression tests. To clarify slurry sludge, settling process can
be used to remove the suspended solid. A settling period of 30 min.
obtained 99% removal efficiency. The clarified water is suitable for
using in concrete mixes, which reduce water consumption, conserve
water recourses, increase the profit, reduce operation cost and save
the environment. Additionally, the dry sludge could be used in the
mix design instead of the fine materials with sizes < 160 um. This
application could conserve the natural materials and solve the
environmental and economical problem caused by sludge
accumulation.},
	    journal   = {International Journal of Environmental and Ecological Engineering},
	  volume    = {3},
	  number    = {3},
	  year      = {2009},
	  pages     = {83 - 88},
	  ee        = {https://publications.waset.org/pdf/1636},
	  url   	= {https://publications.waset.org/vol/27},
	  bibsource = {https://publications.waset.org/},
	  issn  	= {eISSN: 1307-6892},
	  publisher = {World Academy of Science, Engineering and Technology},
	  index 	= {Open Science Index 27, 2009},
	}