Impregnation of Cupper into Kanuma Volcanic Ash Soil to Improve Mercury Sorption Capacity
Commenced in January 2007
Frequency: Monthly
Edition: International
Paper Count: 32807
Impregnation of Cupper into Kanuma Volcanic Ash Soil to Improve Mercury Sorption Capacity

Authors: Jatindra N. Bhakta, Yukihiro Munekage

Abstract:

The present study attempted to improve the Mercury (Hg) sorption capacity of kanuma volcanic ash soil (KVAS) by impregnating the cupper (Cu). Impregnation was executed by 1 and 5% Cu powder and sorption characterization of optimum Hg removing Cu impregnated KVAS was performed under different operational conditions, contact time, solution pH, sorbent dosage and Hg concentration using the batch operation studies. The 1% Cu impregnated KVAS pronounced optimum improvement (79%) in removing Hg from water compare to control. The present investigation determined the equilibrium state of maximum Hg adsorption at 6 h contact period. The adsorption revealed a pH dependent response and pH 3.5 showed maximum sorption capacity of Hg. Freundlich isotherm model is well fitted with the experimental data than that of Langmuir isotherm. It can be concluded that the Cu impregnation improves the Hg sorption capacity of KVAS and 1% Cu impregnated KVAS could be employed as cost-effective adsorbent media for treating Hg contaminated water.

Keywords: Cupper, impregnation, isotherm, kanuma volcanic ash soil, mercury, sorption

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1078643

Procedia APA BibTeX Chicago EndNote Harvard JSON MLA RIS XML ISO 690 PDF Downloads 1621

References:


[1] ATSDR (Agency for Toxic Substances and Disease Registry), "CERCLA Priority List of Hazardous Substances," Agency for Toxic Substances and Disease Registry, Atlanta, 2007. Available at: http://www.atsdr.cdc.gov/cercla/07list.html
[accessed September 20, 2010].
[2] R. Eisler, "Mercury hazards to fish, wildlife, and invertebrates: a synoptic review," U.S. Fish and Wildlife Service Biol. Rep., vol. 85, pp. 1-10, 1987.
[3] P. C. Bidstrup, Toxicity of Mercury and its Compounds. Amsterdam: Elsevier, 1964.
[4] M. Horvat, N. Nolde, V. Fajon, V. Jereb, M. Logar, and S. Lojen, "Total mercury, methylmercury and selenium in mercury polluted areas in the province Guizhou, China," Sci. Total. Environ., vol. 304, pp. 231-256, 2003.
[5] F. Fang, Q. Wang, and J. Li, "Urban environmental mercury in Changchun, a metropolitan city in Northeastern China: source, cycle, and fate," Sci. Total. Environ., vol. 330, pp. 159-170, 2004.
[6] K. R. Mahaffey, "Methylmercury: epidemiology update," in Fish Forum, San Diego, 2004. Available at: http://www.epa.gov/waterscience /fish/forum/2004/presentations/Monday/mahaffey.pdf.
[7] USEPA, "Mercury Study Report to Congress," EPA-452/R-97-005, 1997.
[8] H. Biester, G. Muller, and H. F. Scholer, "Estimating distribution and retention of mercury in three different soils contaminated by emissions from chlor-alkali plants: Part I," Sci. Total. Environ., vol. 284, pp. 177- 189, 2002.
[9] F .M. G. Tack, T. Vanhaesebroeck, M. G. Verloo, K. V. Rompaey, and E. V. Ranst, "Mercury baseline levels in Flemish soils (Belgium)," Environ. Poll., vol. 134, pp. 173-179, 2005.
[10] K. A. Krishnan., and T. S. Anirudhan, "Removal of mercury (II) from aqueous solutions and chlor-alkali industry effluent by steam activated and sulfurised activated carbons prepared from bagasse pith: Kinetics and equilibrium studies," J. Hazard. Mater., vol. 92, pp. 161-183, 2002,
[11] K. Kadirvelu, M. Kavipriya, C. Karthika, N. Vennilamani, and S. Pattabhi, "Mercury(II) adsorption by activated carbon made from sago waste," Carbon, vol. 42, pp. 745-752, 2004.
[12] J. R. Morency, "Zeolite sorbent that effectively removes mercury from flue gases," Filt. and Sep., vol. 39, pp. 24-26, 2002.
[13] C. L. Lai, and S. H. Lin, "electrocoagulation of chemical mechanical polishing (cmp) wastewater from semiconductor fabrication," J. Chem. Eng., vol. 95, pp. 205-211, 2003.
[14] F. M. Pang, S. P. Teng, T. T. Teng, and A. K. Mohd Omar, "Heavy metals removal by hydroxide precipitation and coagulationÔÇö flocculation methods from aqueous solutions," Water Qual. Res. J. Can., vol. 44, pp. 174-182, 2009.
[15] L. Marder, A. M. B. Bernardes, and J. Z. Ferreira, "Cadmium electroplating wastewater treatment using a laboratory-scale electrodialysis system," Sep. Purif. Technol. 2004, 37, 247-255.
[16] K. Xu, G. Zeng, J. Huang, and J. Wu, "Removal of Cd2+ from synthetic wastewater using micellar-enhanced ultrafiltration with hollow fiber membrane," Colloids Surf. A, vol. 294, pp. 140-146, 2007.
[17] L. C. Lin, J. K. Li, and R. S. Juang, "Removal of Cu(II) and Ni(II) from aqueous solutions using batch and fixed-bed ion exchange processes," Desalination, vol. 225, pp. 249-259, 2008.
[18] D. L. Vullo, H. M. Ceretti, M. A. Daniel, S. A. M. Ramirez, and A. Zalts, "Cadmium, zinc and copper biosorption mediated by Pseudomonas veronii 2E," Bioresour. Technol., vol. 99, 5574-5581, 2008.
[19] J. N. Bhakta, Md. Salim, K. Yamasaki, and Y. Munekage, "Mercury adsorption stoichiometry of ceramic and activated carbon from aqueous phase under different pH and temperature," ARPN J. Eng. Appl. Sci., vol. 4, pp. 52-59, 2009a.
[20] M. Zabihi, A. Ahmadpour, and A. H. Asl, "Removal of mercury from water by carbonaceous sorbents derived from walnut shell," J. Hazard. Mater., vol. 167, pp. 230-236, 2009.
[21] J. H. Cai, and C. Q. Jia, "Mercury removal from aqueous solution using coke-derived sulfur-impregnated activated carbons," Ind. Eng. Chem. Res., vol. 49, pp. 2716-2721, 2010.
[22] S. A. Hannah, M. Jelus, and J. M. Cohen, "Removal of uncommon trace metals by physical and chemical treatment processes," J Water Poll Control Federation, vol. 49, pp. 2297-2309, 1977.
[23] W. Stumm, and J. J. Morgan, Aquatic Chemistry. New York: Wiley & Sons, 1996.
[24] K. Sakadevan, and H. J. Bavor, "Phosphate adsorption characteristics of soils, slags and zeolite to be used as substrates in constructed wetland systems," Water Res, vol. 32, pp. 393-399, 1998.
[25] J. M. Benito, M. J. Sánchez, P. Pena, and M. A. Rodríguez, "Development of a new high porosity ceramic membrane for the treatment of bilge water," Desalination, vol. 214, pp. 91-101, 2007.
[26] J. N. Bhakta and Y. Munekage, "Ceramic as a potential tool for water reclamation: A concise review," J. Environ. Protec. Sci., vol. 3, pp. 147- 162, 2009b.
[27] Md. Salim, Y. Munekage, and K. M. Naing, "Arsenic(III) Removal from contaminated water using silica ceramic: A Batch Adsorption Study," J. Appl. Sci., vol. 7, pp. 2314-2320, 2007.
[28] D. Van Halem, H. van der Laan, S. G. J. Heijman, J. C. van Dijk, and G. L. Amy, "Assessing the sustainability of the silverimpregnated ceramic pot filter for low-cost household drinking water treatment," Phys. Chem. Earth., vol. 34, pp. 36-42, 2009.
[29] J. N. Bhakta, and Y. Munekage, "Mercury removal by some soils of Japan from aquatic environment," Env. Eng. and Manag. J., vol. 9, pp. 503-510, 2010.
[30] Y. Li, X. Zhang, and J. Wang, "Preparation for ZSM-5 membranes by a two-stage varying-temperature synthesis," Separ. Purif. Tech., vol. 25, pp. 459-466, 2001.
[31] A. Larbot, S. Alami-younssi, M. Persin, J. Sarrazin, and L. Cot, "Preparation of a c-alumina nanofiltration membrane," J. Membr. Sci., vol. 97, pp. 167-173, 1994.
[32] M. J. S. Yabe, and E. de Oliveira, "Heavy metals removal in industrial effluents by sequential adsorbent treatment," Adv. Environ. Res., vol. 7, pp. 263-272, 2003.
[33] B. Benguella, and H. Benaissa, "Cadmium removal from aqueous solution by chitin: kinetic and equilibrium studies," Water Res., vol. 36, pp. 2463-2474, 2002.
[34] Y. Yalcinkaya, L. Soysal, A. Denizli, and M. Y. Aryca, "Biosorption of cadmium from aquatic systems by carboxymethylcellulose and immobilized trametes versicolor," Hydrometallurgy, vol. 63, pp. 31-40, 2002.
[35] E. A. Oliveira, S. F. Montanher, A. D. Andrade, and J. A. Nobrega, "Equilibrium studies for the sorption of chromium and nickel from aqueous solutions using raw rice bran," Process Biochem., vol. 40, pp. 3653-3659, 2005.
[36] B. F. Jones, and E. Galan, "Sepiolite and palygorskite," in: Reviews in Mineralogy, Hydrous Phyllosilicates, vol. 19, S.W. Bailey, Ed. Washington: Mineralogical Society of America, 1988, pp. 631-674.
[37] Le. Zeng, "A method for preparing silica-containing iron(III) oxide adsorbents for arsenic removal," Water Research, vol. 37, pp. 4351- 4358, 2003.
[38] T. Y. Chen, C. M. Kao, T. Y. Yeh, H. Y. Chien, and A. C. Chao, "Application of a constructed wetland for industrial wastewater treatment: A pilot-scale study," Chemosphere, vol. 64, pp. 497-502, 2006.