%0 Journal Article %A Rabah Haoui %D 2011 %J International Journal of Mechanical and Mechatronics Engineering %B World Academy of Science, Engineering and Technology %I Open Science Index 59, 2011 %T Effect of Mesh Size on the Viscous Flow Parameters of an Axisymmetric Nozzle %U https://publications.waset.org/pdf/11479 %V 59 %X The aim of this work is to analyze a viscous flow in the axisymmetric nozzle taken into account the mesh size both in the free stream and into the boundary layer. The resolution of the Navier- Stokes equations is realized by using the finite volume method to determine the supersonic flow parameters at the exit of convergingdiverging nozzle. The numerical technique uses the Flux Vector Splitting method of Van Leer. Here, adequate time stepping parameter, along with CFL coefficient and mesh size level is selected to ensure numerical convergence. The effect of the boundary layer thickness is significant at the exit of the nozzle. The best solution is obtained with using a very fine grid, especially near the wall, where we have a strong variation of velocity, temperature and shear stress. This study enabled us to confirm that the determination of boundary layer thickness can be obtained only if the size of the mesh is lower than a certain value limits given by our calculations. %P 2332 - 2337