Development of a Thrust Measurement System
Commenced in January 2007
Frequency: Monthly
Edition: International
Paper Count: 32804
Development of a Thrust Measurement System

Authors: S. Jeon, J. Kim, H. Choi

Abstract:

KSLV-I(Korea Space Launch Vehicle-I) is designed as a launch vehicle to enter a 100 kg-class satellite to the LEO(Low Earth Orbit). Attitude angles of the upper-stage, including roll, pitch and yaw are controlled by the cold gas thruster system using nitrogen gas. The cold gas thruster is an actuator in the RCS(Reaction Control System). To design an attitude controller for the upper-stage, thrust measurement in vacuum condition is required. In this paper, the new thrust measurement system and calibration mechanism are developed and measurement errors and signal processing method are presented.

Keywords: cold gas thruster, launch vehicle, thrust measurement, calibration mechanism, signal processing

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1075577

Procedia APA BibTeX Chicago EndNote Harvard JSON MLA RIS XML ISO 690 PDF Downloads 2708

References:


[1] Gwang-rae Cho: Research and Development of KSLV-I(V), MOST, 2007.
[2] Shimshon Adler, Abraham Warshavsky, and Are Peretz, "Low-cost cold-gas reaction control system for slohsat FLEVO small satellite," Journal of Spacecraft and Rocket, vol. 42, no. 2, March-April. 2005, pp. 345-351.
[3] Willian C. Stone, "Fast variable-amplitude cold gas thruster," Journal of spacecraft and rockets, vol. 32, no. 2, 1995, pp. 335-343.
[4] J. Brouseau, R. Maynard, A. Singaraju, and H. Richter, "A testbed for attitude control using cold gas thrusters," Proceedings of IMEC2006, 2006 ASME International Mechanical Engineering Congress and Expsition, November 5-10, 2006, pp. 595-604.
[5] R. L. Bayt and K. S. Breuer, "Fabrication and testing of micron-sized cold-gas thrusters," Progress in astronautics and aeronautic AIAA 2000, pp. 381-397.
[6] Claudio Lugini and Marcello Ronmano, "A ballistic-pendulum test stand to characterize small cold-gas thruster nozzle," ACTA Astronautica, 2009, pp. 615-625.
[7] S. Kang, H. Cho, and Y. Chang, "Development and testing of a micro-thruster impulse characterization system utilizing pendulum swing time measurements," Sensors and Actuators A, 2008, pp. 381-387.
[8] K. Toyoda, K. Komurasaki, and Y. Arakawa, " Thrust performance of a CW laser thruster in vacuum," Vacuum, vol. 65, 2002, pp. 383-388.
[9] K. Kondo, S. Tankaka, H. Habu, S. Tokudome, K. Hori, H. Sito, A. Itoh, M. Watanabe, and M. Esahi, "Vacuum test of a micro-solid propellant rocket array thruster," IEICE Electronics Express, vol. 1, No. 8, 2004, pp. 222-227.
[10] S. Wu, W. H. Steyn, and R. E. Bordany, "In-orbit thruster calibration techniques and experiment results with UoSAT-12," Control Engineering Practice, 2004, pp. 87-98.
[11] Nikos A. Gatsonis and Richard A. Nanson : Simulations of cold-gas nozzle and plume flows and flight data comparisons, Journal of Spacecraft and Rocket, vol. 37, no. 1, January-February, 2000, pp. 39-48.
[12] Nikos A. Satsonis, R. E. Erlandson, P. K. Swaminathan, and C. K. Kumar : Analysis of pressure measurements during cold-gas thruster firings onboard suborbital spacecraft, Journal of Spacecraft and Rocket, vol. 36, no. 5, September-October, 1999, pp. 688-692.
[13] S. Jeon and S. Jung, "Hardware in the Loop Simulation for the Reaction Control System using PWM-based Limit Cycle Analysis," IEEE Trans. Control Systems Technology, vol. 20, no. 2, March, 2012, pp.538-545.