Analysis on Heat Transfer in Solar Parabolic Trough Collectors

Authors: Zaid H. Yaseen, Jamel A. Orfi, Zeyad A. Alsuhaibani

Abstract:

Solar power has a huge potential to be employed in the fields of electricity production, water desalination, and multi generation. There are various types of solar collectors, and Parabolic Trough Collectors (PTCs) are common among these types. In PTCs, a mirror is used to direct the incident radiation on an absorber tube to utilize the heat in power generation. In this work, a PTC covered with a glass tube is presented and analyzed. Results showed that temperatures of 510 ℃ for steam can be reached for certain parameters. The work also showed the viability of using Benzene as the working fluid in the absorber tube. Also, some analysis regarding changing the absorber’s tube diameter and the efficiency of the solar collector was demonstrated in this work. The effect of changing the heat transfer correlations for the convection phenomena of the working fluid was illustrated. In fact, two heat transfer correlations: Dittus-Boelter and Gnielinski correlations were used, and the outcomes showed resemblance in the results for the maximum attainable temperature in the working fluid.

Keywords: Absorber tube, glass tube, incident radiation, parabolic trough collector.

References:

[1] Mohamad, A., Orfi, J., & Alansary, H. (2013). Heat losses from parabolic trough solar collectors. International Journal of Energy Research, 38(1), 20–28. https://doi.org/10.1002/er.3010
[2] Goswami, D. Y. (2015b). Principles of solar engineering. CRC Press. p.120
[3] Ahmad, A., Prakash, O., Kausher, R., Kumar, G., Pandey, S., & Hasnain, S. M. (2024). Parabolic trough solar collectors: A sustainable and efficient energy source. Materials Science for Energy Technologies, 7, 99–106. https://doi.org/10.1016/j.mset.2023.08.002
[4] Kalogirou, S., Lloyd, S., & Ward, J. (1997). Modeling, optimisation and performance evaluation of a parabolic trough solar collector steam generation system. Solar Energy, 60(1), 49–59. https://doi.org/10.1016/s0038-092x(96)00131-4
[5] Sumayli, H., El-Leathy, A., Danish, S. N., Al-Ansary, H., Almutairi, Z., Al-Suhaibani, Z., Saleh, N. S., Saeed, R. S., Alswaiyd, A., Djajadiwinata, E., & Alaqel, S. (2023). Integrated CSP-PV hybrid solar power plant for two cities in Saudi Arabia. Case Studies in Thermal Engineering, 44, 102835. https://doi.org/10.1016/j.csite.2023.102835
[6] Kouche, A. E., & Gallego, F. O. (2022). Modeling and numerical simulation of a parabolic trough collector using an HTF with temperature dependent physical properties. Mathematics and Computers in Simulation, 192, 430–451. https://doi.org/10.1016/j.matcom.2021.09.015
[7] España, M. D., & Rodriguez, L. (1987). Approximate steady-state modeling of solar trough collectors. Solar Energy, 38(6), 447–454. https://doi.org/10.1016/0038-092x(87)90026-0
[8] Odeh, S. D., & Morrison, G. L. (2006). Optimization of parabolic trough solar collector system. International Journal of Energy Research, 30(4), 259–271. https://doi.org/10.1002/er.1153
[9] Herrmann, U., Kelly, B., & Price, H. (2004). Two-tank molten salt storage for parabolic trough solar power plants. Energy, 29(5–6), 883–893. https://doi.org/10.1016/s0360-5442(03)00193-2
[10] Kalogirou, S. (1997). Economic analysis of a solar assisted desalination system. Renewable Energy, 12(4), 351–367. https://doi.org/10.1016/s0960-1481(97)00063-3
[11] Compain, P. (2012). Solar energy for water desalination. Procedia Engineering, 46, 220–227. https://doi.org/10.1016/j.proeng.2012.09.468
[12] Boles, M., & Cengel, Y. (2014). Thermodynamics: an Engineering approach. McGraw-Hill Education. p.1048