Numerical Study Pile Installation Disturbance Zone Effects on Excess Pore Pressure Dissipation

Authors: Kang Liu, Meng Liu, Meng-Long Wu, Da-Chang Yue, Hong-Yi Pan

Abstract:

The soil setup is an important factor affecting pile bearing capacity; there are many factors that influence it, all of which are closely related to pile construction disturbances. During pile installation in soil, a significant amount of excess pore pressure is generated, creating disturbance zones around the pile. The dissipation rate of excess pore pressure is an important factor influencing the pile setup. The paper aims to examine how alterations in parameters within disturbance zones affect the dissipation of excess pore pressure. An axisymmetric FE model is used to simulate pile installation in clay, subsequently consolidation using PLAXIS 3D. The influence of disturbed zone on setup is verified, by comparing the parametric studies in uniform field and non-uniform field. Three types of consolidation are employed: consolidation in three directions, vertical consolidation, horizontal consolidation. The results of the parametric study show that the permeability coefficient decreases, soil stiffness decreases, and reference pressure increases in the disturbance zone, resulting in an increase in the dissipation time of excess pore pressure and exhibiting a noticeable threshold phenomenon, which has been commonly overlooked in previous literature. The research in this paper suggests that significant thresholds occur when the coefficient of permeability decreases to half of the original site's value for three-directional and horizontal consolidation within the disturbed zone. Similarly, the threshold for vertical consolidation is observed when the coefficient of permeability decreases to one-fourth of the original site's value. Especially in pile setup research, consolidation is assumed to be horizontal; the study findings suggest that horizontal consolidation has experienced notable alterations as a result of the presence of disturbed zones. Furthermore, the selection of pile installation methods proves to be critical. A nonlinearity excess pore pressure formula is proposed based on cavity expansion theory, which includes the distribution of soil profile modulus with depth.

Keywords: pile setup, threshold value effect, installation effects, uniform field, non-uniform field

References:

[1] P. Basu, M. Prezzi, and R. Salgado, “Modeling of Installation and Quantification of Shaft Resistance of Drilled-Displacement Piles in Sand,” International Journal of Geomechanics, vol. 14, no. 2, pp. 214–229, 2014, doi:10.1061/(ASCE)GM.1943-5622.0000303.
[2] D. Sheng, K. D. Eigenbrod, and P. Wriggers, “Finite element analysis of pile installation using large-slip frictional contact,” Computers and Geotechnics, vol. 32, no. 1, pp. 17–26, 2005, doi:10.1016/j.compgeo.2004.10.004.
[3] D. Egan, W. Scott, and B. McCabe, “Installation effects of vibro replacement stone columns in soft clay,” vol. In Proceedings of the 2nd International Workshop on the Geotechnics of Soft Soils: Focus on Ground Improvement, Glasgow, UK, 3–5 September 2008. Taylor and Francis, London. pp. 23–29., 2008.
[4] M. F. Randolph, J. P. Carter, and C. P. Wroth, “Driven piles in clay—the effects of installation and subsequent consolidation,” Géotechnique, vol. 29, no. 4, pp. 361–393, 1979, doi:10.1680/geot.1979.29.4.361.
[5] R. Walker and B. Indraratna, “Vertical drain consolidation with overlapping smear zones,” Géotechnique, vol. 57, no. 5, pp. 463–467, 2007, doi:10.1680/geot.2007.57.5.463.
[6] A. Yildiz, “Numerical modeling of vertical drains with advanced constitutive models,” Computers and Geotechnics, vol. 36, no. 6, pp. 1072–1083, 2009, doi:10.1016/j.compgeo.2009.04.001.
[7] M. F. Randolph, “Science and empiricism in pile foundation design,” Géotechnique, vol. 53, no. 10, pp. 847–875, 2003, doi:10.1680/geot.2003.53.10.847.
[8] A. J. Whittle and T. Sutabutr, “Prediction of Pile Setup in Clay,” Transportation Research Record: Journal of the Transportation Research Board, vol. 1663, no. 1, pp. 33–40, 1999, doi:10.3141/1663-05.
[9] D. J. White and M. D. Bolton, “Displacement and strain paths during plane-strain model pile installation in sand,” Géotechnique, vol. 54, no. 6, pp. 375–397, 2004, doi:10.1680/geot.2004.54.6.375.
[10] J. T. DeJong and M. Randolph, “Influence of Partial Consolidation during Cone Penetration on Estimated Soil Behavior Type and Pore Pressure Dissipation Measurements,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 138, no. 7, pp. 777–788, 2012, doi:10.1061/(ASCE)GT.1943-5606.0000646.
[11] C. Rujikiatkamjorn and B. Indraratna, “Analytical solution for radial consolidation considering soil structure characteristics,” Canadian Geotechnical Journal, vol. 52, no. 7, pp. 947–960, 2015, doi:10.1139/cgj-2014-0277.
[12] T. Pucker and J. Grabe, “Numerical simulation of the installation process of full displacement piles,” Computers and Geotechnics, vol. 45, pp. 93–106, 2012, doi:10.1016/j.compgeo.2012.05.006.
[13] M. Y. Fattah, K. T. Shlash, and M. S. M. Al-Soud, “Pile-clayey soil interaction analysis by boundary element method,” Journal of Rock Mechanics and Geotechnical Engineering, vol. 4, no. 1, pp. 28–43, 2012, doi:10.3724/SP.J.1235.2012.00028.
[14] P. Van Den Berg, R. De Borst, and H. Huétink, “An Eulerean Finite Element Model for Penetration in Layered Soil,” International Journal for Numerical and Analytical Methods in Geomechanics, vol. 20, no. 12, pp. 865–886, 1996, doi:10.1002/(SICI)1096-9853(199612)20:12<865::AID-NAG854>3.0.CO;2-A.
[15] M. A. Benmebarek and M. Movahedi Rad, “DEM analysis of crushing evolution in cemented granular materials during pile penetration,” Computers and Geotechnics, vol. 161, p. 105631, 2023, doi:10.1016/j.compgeo.2023.105631.
[16] K. H. Andersen, L. Andresen, H. P. Jostad, and E. C. Clukey, “Effect of Skirt-Tip Geometry on Set-Up Outside Suction Anchors in Soft Clay,” in 23rd International Conference on Offshore Mechanics and Arctic Engineering, Volume 1, Parts A and B, Vancouver, British Columbia, Canada, Jan. 2004, pp. 1035–1044, doi:10.1115/OMAE2004-51564.
[17] H. K. Engin, R. B. J. Brinkgreve, and A. F. Van Tol, “Simplified numerical modelling of pile penetration - the press-replace technique,” International Journal for Numerical and Analytical Methods in Geomechanics, vol. 39, no. 15, pp. 1713–1734, 2015, doi:10.1002/nag.2376.
[18] J. P. S. Tan, S. H. Goh, and S. A. Tan, “Numerical Analysis of a Jacked-In Pile Installation in Clay,” International Journal of Geomechanics, vol. 23, no. 6, p. 04023061, 2023, doi:10.1061/IJGNAI.GMENG-7946.
[19] W. Broere and A. F. Van Tol, “Modelling the bearing capacity of displacement piles in sand,” Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, vol. 159, no. 3, pp. 195–206, 2006, doi:10.1680/geng.2006.159.3.195.
[20] J. Castro and M. Karstunen, “Numerical simulations of stone column installation,” Canadian Geotechnical Journal, vol. 47, no. 10, pp. 1127–1138, 2010, doi:10.1139/T10-019.
[21] T. Schanz, P. A. Vermeer, and P. G. Bonnier, “The hardening soil model: Formulation and verification,” in Beyond 2000 in Computational Geotechnics, 1st ed., R. B. J. Brinkgreve, Ed. Routledge, 1999, pp. 18–20.
[22] L. T. Hoang, K. X. Dao, X. Xiong, and T. Matsumoto, “Performance analysis of a jacked-in single pile and pile group in saturated clay ground,” Soils and Foundations, vol. 62, no. 1, p. 101094, 2022, doi:10.1016/j.sandf.2021.101094.
[23] I. F. Collins and H. S. Yu, “Undrained Cavity Expansions in Critical State Soils,” International Journal for Numerical and Analytical Methods in Geomechanics, vol. 20, no. 7, pp. 489–516, 1996, doi:10.1002/(SICI)1096-9853(199607)20:7<489::AID-NAG829>3.0.CO;2-V.
[24] W. D. Guo and M. F. Randolph, “Vertically loaded piles in non-homogeneous media,” International Journal for Numerical and Analytical Methods in Geomechanics, vol. 21, no. 8, pp. 507–532, 1997, doi:10.1002/(SICI)1096-9853(199708)21:8<507::AID-NAG888>3.0.CO;2-V.
[25] M. Roy, R. Blanchet, F. Tavenas, and P. L. Rochelle, “Behaviour of a sensitive clay during pile driving,” Canadian Geotechnical Journal, vol. 18, no. 1, pp. 67–85, 1981, doi:10.1139/t81-007.
[26] H. Zhu and M.-F. Chang, “Load Transfer Curves along Bored Piles Considering Modulus Degradation,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 128, no. 9, pp. 764–774, 2002, doi:10.1061/(ASCE)1090-0241(2002)128:9(764).
[27] H. Mahmoodzadeh and M. F. Randolph, “Penetrometer Testing: Effect of Partial Consolidation on Subsequent Dissipation Response,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 140, no. 6, p. 04014022, 2014, doi:10.1061/(ASCE)GT.1943-5606.0001114.