Strong Adhesion and High Wettability at Polyetheretherketone-Resin/Titanium-Dioxide Interface Obtained with Crystal-Orientation Control

Authors: Tomio Iwasaki, Yosuke Kawahito

Abstract:

The adhesion strength and wettability at the interfaces between a polyetheretherketone (PEEK) resin and titanium dioxide (TiO2) have become more important because direct joining of PEEK resin and titanium (Ti), whose surface has usually the oxide (TiO2), is needed not only in vehicles such as airplanes, automobiles, and space vehicles, but also in medical devices such as implants. To realize strong joint between the PEEK resin and TiO2, the dependence of the adhesion strength and wettability on crystal orientations of rutile TiO2 were investigated by using molecular simulations. Molecular dynamics simulations were conducted by combining quantum-mechanics equation of electrons with Newton’s equation of motion of nuclear coordinates (atomic coordinates). By putting a PEEK-resin sphere on a rutile TiO2 surface and by heating the system to 650 K, the contact angles at the interfaces were calculated to evaluate the wettability. After the system is cooled to 300 K from 650 K, to evaluate the adhesin strength, the adhesive fracture energy is calculated as the difference between the energy of the PEEK-TiO2 attached state and that of the PEEK-TiO2 detached state. The results of the contact angles showed that PEEK resin on the TiO2(100) and that on the TiO2(001) surface has low wettability with large contact angles. On the other hand, PEEK resin on the TiO2(110) surface has high wettability with a small contact angle. The results of the adhesive fracture energies showed that the adhesion at the PEEK-resin/TiO2(100) and PEEK-resin/TiO2(001) interfaces are weak. On the other hand, the adhesion at the PEEK-resin/TiO2(110) interface is strong. To clarify the reason that the higher wettability and stronger adhesion are obtained at the PEEK/TiO2(110) interface than at the at the PEEK/TiO2(100) and PEEK/TiO2(001) interfaces, atomic configurations at the interfaces were visualized. The atomic configuration at the PEEK/TiO2(110) interface showed that the lattice-matched coherent interface is realized, and the atomic density is high. On the other hand, the atomic configuration at the PEEK/TiO2(001) interface showed the lattice-unmatched incoherent interface. The atomic configuration at the PEEK/TiO2(100) interface showed that the atomic density is very low although the lattice-matched interface is realized. Therefore, the lattice matching and the high atomic density at the PEEK/TiO2(001) interface are considered to be dominant factors in the high wettability and strong adhesion.

Keywords: Adhesion, direct joining, PEEK, TiO2, wettability.

References:

[1] H. Wang, Y. Kawahito, and Koji Nishimoto, “A laser joining system for titanium and polyethylene terephthalate plastic controlled by multiple signal sources,” IEEE Transactions on Industrial Electronics, DOI: 10.1109/TIE.2018.2831190, Nov. 2018.
[2] H. Wang, W. Feng, Z. Zhang, Y. Guan, and H. Zheng, “Hybrid laser technique for joining of polymer and titanium alloy,” J. of Laser Applications, vol. 31, pp. 0417-1–0417-6, Oct. 2019, doi: 10.2351/1.5097631.
[3] C. Tan, J. Su, Z. Feng, Y. Liu, B. Chen, and X. Song, “Laser joining of CFRTP to titanium alloy via laser surface texturing,” Chinese Journal of Aeronautics, vol. 34, no.5, pp.103-114, 2021.
[4] H. Zushi, T. Odai, I. Ohsawa, K. Uzawa, and J. Takahashi, “Mechanical properties of CFRP and CFRTP after recycling,” Proceedings of Fifteenth International Conference on Composite Materials, pp. 1-10, 2005, ISBN:1-86840-589-3.
[5] N. Matsutsuka, J. Takahashi, H. Zushi, I. Osawa, and K. Uzawa, “Evaluation of recycled CFRTP for mass production applications,” Proceedings of The Ninth Japan International SAMPE symposium, pp. 50-55, 2005.
[6] M. Bragaglia, V. Cherubini, and F. Nanni, “PEEK-TiO2 composites with enhanced UV resistance,” Composites Science and Technology, Vol. 199, 108365, Oct. 2020.
[7] H. Tsou, M. Chi, Y. Hung, C. Chung, and J. He, “In vivo osseointegration performance of titanium dioxide coating modified polyetheretherketone using arc ion plating for spinal implant application,” BioMed Research International, vol. 2015, Article ID 328943, 2015.
[8] R. Car and M. Parrinello, “Unified approach for molecular dynamics and density-functional theory,” Phys. Rev. Lett., vol. 55, no. 22, pp. 2471–2474, Nov. 1985.
[9] S. Kasahara, J. Koyanagi, K. Mori, and M. Yabe, “Evaluation of interface properties of carbon fiber/resin using the full atomistic model considering the electric charge state,” Advanced Composite Materials, vol. 30, no. 2, pp. 164–175, 2021.
[10] Materials Studio, https://www.3ds.com/ja/products-services/biovia/products/molecular-modeling-simulation/biovia-materials-studio/.
[11] T. Iwasaki, “Design of ceramic materials with strong adhesion to resin with a combination of orthogonal array and response-surface method,” J. of the Society of Materials Science, Japan, vol. 67, no. 4, pp. 479-486, Apr. 2018.