Sliding Mode Power System Stabilizer for Synchronous Generator Stability Improvement
Commenced in January 2007
Frequency: Monthly
Edition: International
Paper Count: 32799
Sliding Mode Power System Stabilizer for Synchronous Generator Stability Improvement

Authors: J. Ritonja, R. Brezovnik, M. Petrun, B. Polajžer

Abstract:

Many modern synchronous generators in power systems are extremely weakly damped. The reasons are cost optimization of the machine building and introduction of the additional control equipment into power systems. Oscillations of the synchronous generators and related stability problems of the power systems are harmful and can lead to failures in operation and to damages. The only useful solution to increase damping of the unwanted oscillations represents the implementation of the power system stabilizers. Power system stabilizers generate the additional control signal which changes synchronous generator field excitation voltage. Modern power system stabilizers are integrated into static excitation systems of the synchronous generators. Available commercial power system stabilizers are based on linear control theory. Due to the nonlinear dynamics of the synchronous generator, current stabilizers do not assure optimal damping of the synchronous generator’s oscillations in the entire operating range. For that reason the use of the robust power system stabilizers which are convenient for the entire operating range is reasonable. There are numerous robust techniques applicable for the power system stabilizers. In this paper the use of sliding mode control for synchronous generator stability improvement is studied. On the basis of the sliding mode theory, the robust power system stabilizer was developed. The main advantages of the sliding mode controller are simple realization of the control algorithm, robustness to parameter variations and elimination of disturbances. The advantage of the proposed sliding mode controller against conventional linear controller was tested for damping of the synchronous generator oscillations in the entire operating range. Obtained results show the improved damping in the entire operating range of the synchronous generator and the increase of the power system stability. The proposed study contributes to the progress in the development of the advanced stabilizer, which will replace conventional linear stabilizers and improve damping of the synchronous generators.

Keywords: Control theory, power system stabilizer, robust control, sliding mode control, stability, synchronous generator.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.2571936

Procedia APA BibTeX Chicago EndNote Harvard JSON MLA RIS XML ISO 690 PDF Downloads 998

References:


[1] International Energy Agency, (2014), “IEA Statistics and Balances”, available at: http://www.iea.org/statistics/ (accessed 1 June 2014).
[2] Edvard, (2014),”Historical review of power system stability problems”, available at: http://electrical-engineering-portal.com/historical-review-of-power-system-stability-problems (accessed 1 June 2014).
[3] Anderson, P. M. and Fouad, A. A. (1977), Power system control and stability, The Iowa State University Press, Ames, Iowa.
[4] Demello, F. P. and Concordia, C. (1969), “Concepts of synchronous machine stability as affected by excitation control“, IEEE Tran. Power Appar. Syst., vol. 88, no. 4 , pp. 316-29.
[5] Machowsky, J. and Bialek, J. W. and Bumby, J. R. (2008), Power system dynamics, stability and control, John Wiley and Sons, Ltd., West Susex, United Kingdom.
[6] Kundur, P. (1994), Power system stability and control, McGraw-Hill Inc. New York.
[7] Heffron, W. G. and Phillips, R. A. (1952), “Effect of modern amplidyne voltage regulator on underexcited operation of large turbine generators“, AIEE Transactions, vol. 71, pp. 692-97.
[8] IEEE Std. (2005), “IEEE Recommended practice for excitation system models for power system stability studies”, IEEE Std 421.5 – 2005, IEEE Power engineering society by Energy development and power generation committee, 21 April 2006.
[9] Utkin, V. I. (1993), “Sliding mode control design principles and application to electric drives”, IEEE Transactions on industrial electronics, vol. 40, no. 1 , pp. 23-36.
[10] Bartolini, G., Fridman, L., Pisano, A. and Usai, E. (2008), Modern sliding mode control theory, Springer Verlag, New York.
[11] Šabanovic, A. (2011): “Variable structure systems with sliding modes in motion control – A survey”, IEEE Transactions on industrial informatics, vol. 7, no. 2 , pp. 212-223.