Construction 4.0: The Future of the Construction Industry in South Africa

Authors: Temidayo. O. Osunsanmi, Clinton Aigbavboa, Ayodeji Oke

Abstract:

The construction industry is a renowned latecomer to the efficiency offered by the adoption of information technology. Whereas, the banking, manufacturing, retailing industries have keyed into the future by using digitization and information technology as a new approach for ensuring competitive gain and efficiency. The construction industry has yet to fully realize similar benefits because the adoption of ICT is still at the infancy stage with a major concentration on the use of software. Thus, this study evaluates the awareness and readiness of construction professionals towards embracing a full digitalization of the construction industry using construction 4.0. The term ‘construction 4.0’ was coined from the industry 4.0 concept which is regarded as the fourth industrial revolution that originated from Germany. A questionnaire was utilized for sourcing data distributed to practicing construction professionals through a convenience sampling method. Using SPSS v24, the hypotheses posed were tested with the Mann Whitney test. The result revealed that there are no differences between the consulting and contracting organizations on the readiness for adopting construction 4.0 concepts in the construction industry. Using factor analysis, the study discovers that adopting construction 4.0 will improve the performance of the construction industry regarding cost and time savings and also create sustainable buildings. In conclusion, the study determined that construction professionals have a low awareness towards construction 4.0 concepts. The study recommends an increase in awareness of construction 4.0 concepts through seminars, workshops and training, while construction professionals should take hold of the benefits of adopting construction 4.0 concepts. The study contributes to the roadmap for the implementation of construction industry 4.0 concepts in the South African construction industry.

Keywords: Building information technology, Construction 4.0, Industry 4.0, Smart Site.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1315923

References:

[1] T. D. Oesterreich and F. Teuteberg, “Understanding the implications of digitisation and automation in the context of industry 4.0.A triangulation approach and elements of a research agenda for the construction industry”, Computer in industry Vol.83, No.10, 2016, pp. 121-139.
[2] CIDB, “Construction quality in South Africa, a client perspective,” Retrieved on 13th September 2017 from https://bizconnect.standardbank.co.za/sector-news/construction/swotanalysis-of-the-construction-sector-in-south-africa.aspx, 2016.
[3] L. G. Tipili, P. O. Ojeba and M. S. Ilyasu, “Evaluating the effects of communication in construction project delivery in Nigeria” Journal of environmental science and technology, Vol.2, No.5,2014, pp.48-54.
[4] G. B. Shrestha and M. M Kumaraswamy, “Problems in Technology Transfer vs. Potential for Technology Exchange,” A Hong Kong construction perspective, Vol. 2, No.3, 2011, pp. 23-34.
[5] S. Mak, “A model of information management for construction using information technology,” Automation in Construction, Vol. 21 No.10, 2011, pp. 257–263.
[6] O. A. Olatunji, “Modelling the costs of corporate implementation of building information modelling,” Journal of Financial Management of Property and Construction, Vol.16, No.1, 2011, pp. 211-23.
[7] P. L. Fernandes, “Advantages and disadvantages of BIM platforms on construction site,” Retrieved on the 29th August 2017 from https://repositorio-aberto.up.pt/bitstream/10216/68980/2/26948.pdf, 2013.
[8] N. Thurairajah and D. Goucher, “Advantages and challenges of using BIM,” Retrieved on the 1st September 2017 from consultant perspective. http://ascpro.ascweb.org/chair/paper/CPRT114002013.pdf, 2016.
[9] Y. Lu, “Industry 4.0 a survey on technologies, applications and open research issues. Journal of industrial information integration Vol. 6, No.1, 2017, pp. 1-10.
[10] M. Buss and M. White, “The rise of construction 4.0,” Retrieved on the 1st September 2017 from https://www.youtube.com/watch?v=BBNbpq24m9o&t=2702s, 2016.
[11] D. Montgomery, “The future for construction product manufacturing. Digitalisation, industry and the circular economy,” Retrieved on the 1st September 2017 from http://www.thefis.org/wp-content/uploads/2016/10/cpa-future-of-construction-product-manufacturing-report-2016.pdf, 2016.
[12] R. Antunes and V. Gonzalez, “A production model for construction: a theoretical framewok, “Buildings, MDPI journals, Vol.5, No.1, 2015, pp. 209-228.
[13] M. D. Mathonsi and W. D. Thwala, “Factors influencing the selection of procurement systems in the south African construction industry” African journal of business management Vol.6, No.10, 2012, pp. 3583-3594.
[14] R. Fischer, “Productivity in the construction industry,” Unpublished BSc thesis submitted at the faculty of engineering, built environment and information technology at the University of Pretoria 2009.
[15] N. T. Adugna, “A study of causes of delay and cost overrun in office construction projects in the ethekwini municipal area, South Africa,” Unpublished master thesis submitted to the faculty of Engineering and built environment at Durban university of technology South Africa, 2009.
[16] A. M. Costin and J. Telzer, “Fusing passive RFID and BIM for increased accuracy in indoor localization,” Visualization in Engineering, Vol.3, No.17, 2015, pp 1-20.
[17] A. S. Fitchett, “Skills development and employment creation through small public buildings in south Africa,” Retrieved on 12st September 2017 http://wiredspace.wits.ac.za/bitstream/handle/10539/7217/A%20Fitchett.PDF, 2009.
[18] S. Mbeki, “Causes, effects and impacts of shortage of skilled artisans on contractor productivity,” Unpublished master thesis submitted to the department of construction management and quantity surveying Cape Peninsula University of Technology South Africa, 2009.
[19] N. Crampton, “Swot analysis of the construction sector in south Africa,” Retrieved on 13th September 2017 from https://bizconnect.standardbank.co.za/sector-news/construction/swot-analysis-of-the-construction-sector-in-south-africa.aspx, 2016.
[20] M. G. Dzunisani, “Implementation of government housing delivery programme in the gravellote area of ba-phalaborwa municipality, “Unpublished master thesis submitted at the school of leadership University of Limpopo, 2011.
[21] PWC, “Highlighting trends in the South African construction industry. Retrieved on 12th September 2017 from https://www.pwc.co.za/en/assets/pdf/sa-construction-2015.pdf, 2015.
[22] B. Flyvbjerg, M. K. Holm and S. L. Buhl, “How common and how large are cost overruns in Transport infrastructure projects,” Transport Reviews, Vol. 23, No. 2, 2003, pp 71-88.
[23] A. A. Olatunji, “Influence on Construction Project Delivery Time,” University of Nelson Mandela Metropolitan University, and unpublished PhD thesis, 2009.
[24] A. Enshassi, S. Mohammed and J. Mosa, “Risk management in building projects: contractors' perspective,” Emirates Journal for Engineering Research, Vol. 13 No.1, 2008 pp 29-44.
[25] A. Enshassi, S. Mohammed and S. Abushaban, “Factors affecting the performance of construction projects in the Gaza Strip,” Journal of Civil Engineering and Management, Vol. 15, No. 3, pp 269-280.
[26] N. S. Priyadharshini and K. S. Satheesh, “Project communication is key to productive construction and its research needs in the future of construction engineering and management,” International journal of science, technology and management, Vol.4, No.1,2015, pp 1493-1499.
[27] X. Li, Q. Li, W. Wu, and W. Wang, “Application of supply chain management in construction project,” proceedings of the national doctor research forum, 21-23 Shanghai, China, 2007, pp 34-46.
[28] P. Nitithamyong and M. J. Skibniewski, “Web-based construction project management systems: how to make them successful,” Automation in Construction, Vol.4, No.13, 2004 491– 506.
[29] K. Daniel and R. Muller, “Industry 4.0 and its impact on internationalization,” Retrieved on 14th September 2017 from https://www.s ge.com/sites/default/files/cserver/static/downloads/S-GE_Whitepaper_Industry40_2016_final.pdf , 2016.
[30] V. H. Heynitz and M. Bremicker, “Industry 4.0 The factory of the future its challenges,” Retrieved on 13th September 2017 from https://assets.kpmg.com/content/dam/kpmg/es/pdf/2017/06/the-factory-of-the-future.pdf, 2016.
[31] F. Zezluka, P. Marcon, I. Vesley and O. Sajid, “Industry 4.0 an introduction in the phenomenon,” IFAC-papers online Vol.49, No.25,2016, pp. 008-012.
[32] R. M. Mahamood and E. T Akinlabi, E. T, “Functionality graded materials mining, metallurgy and materials engineering,” Springers eleven edition, 2017.
[33] BDC, “Industry 4.0 the new industrial revolution are Canadian manufacturers ready,” Retrieved on 13th September 2017 from https://bridgr.co/wp-content/uploads/2017/06/bdc-etude-manufacturing-en.pdf, 2016.
[34] J. M Sardroud, “Influence of RFID technology on automated management of construction materials and components,” Science Iran, Vol. 19, No.3, 2012, pp.381-392.
[35] J. Morrissy and Mansfield, “BIM best thing since sliced bread,” Retrieved on the 1st September 2017 from https://www.dlapiper.com/~/media/Files/Insights/Publications/2012/01/BIM%20%20Best%20thing%20since%20sliced%20bread/Files/Engineering_Construction_Legal_Upate_BIM_31_Janu__/FileAttachment/Engineering_Construction_ Legal_Upate_BIM_31_Janu__.pdf, 2012.
[36] W. Shahzad, J. Mbachu and N. Domingo, “Marginal productivity gained through prefabrication building projects in Auckland,” Buildings, Vol. 5, No. 1, 2015, pp.196-208.
[37] F. E. Boafo and J. Kim, “Performance of modular prefabricated architecture case study based review and future pathways,” Sustainability, Vol. 8, No. 1, 2016, pp.1-16.