CFD Study of Subcooled Boiling Flow at Elevated Pressure Using a Mechanistic Wall Heat Partitioning Model

Authors: Machimontorn Promtong, Sherman C. P. Cheung, Guan H. Yeoh, Sara Vahaji, Jiyuan Tu

Abstract:

The wide range of industrial applications involved with boiling flows promotes the necessity of establishing fundamental knowledge in boiling flow phenomena. For this purpose, a number of experimental and numerical researches have been performed to elucidate the underlying physics of this flow. In this paper, the improved wall boiling models, implemented on ANSYS CFX 14.5, were introduced to study subcooled boiling flow at elevated pressure. At the heated wall boundary, the Fractal model, Force balance approach and Mechanistic frequency model are given for predicting the nucleation site density, bubble departure diameter, and bubble departure frequency. The presented wall heat flux partitioning closures were modified to consider the influence of bubble sliding along the wall before the lift-off, which usually happens in the flow boiling. The simulation was performed based on the Two-fluid model, where the standard k-ω SST model was selected for turbulence modelling. Existing experimental data at around 5 bars were chosen to evaluate the accuracy of the presented mechanistic approach. The void fraction and Interfacial Area Concentration (IAC) are in good agreement with the experimental data. However, the predicted bubble velocity and Sauter Mean Diameter (SMD) are over-predicted. This over-prediction may be caused by consideration of only dispersed and spherical bubbles in the simulations. In the future work, the important physical mechanisms of bubbles, such as merging and shrinking during sliding on the heated wall will be incorporated into this mechanistic model to enhance its capability for a wider range of flow prediction.

Keywords: CFD, mechanistic model, subcooled boiling flow, two-fluid model.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1130203

References:

[1] Zeitoun, O. and M. Shoukri, Axial Void Fraction Profile in Low Pressure Subcooled Flow Boiling. 1996.
[2] Lee, T.H., G.C. Park, and D.J. Lee, Local flow characteristics of subcooled boiling flow of water in a vertical concentric annulus. International Journal of Multiphase Flow, 2002. 28(8): p. 1351-1368.
[3] Situ, R., et al., Flow structure of subcooled boiling flow in an internally heated annulus. International Journal of Heat and Mass Transfer, 2004. 47(24): p. 5351-5364.
[4] Zuber, N., The Dynamics of Vapor Bubbles in Nonuniform Temperature Fields. International Journal of Heat and Mass Transfer, 1961. 2: p. 83-98.
[5] Zeitoun, O. and M. Shoukri, Bubble behavior and mean diameter in subcooled flow boiling. Journal of Heat Transfer-Transactions of the Asme, 1996. 118(1): p. 110-116.
[6] Klausner, J.F., et al., Vapor Bubble Departure in Forced-Convection Boiling. International Journal of Heat and Mass Transfer, 1993. 36(3): p. 651-662.
[7] Situ, R., et al., Photographic study of bubble behaviors in forced convection subcooled boiling. International Journal of Heat and Mass Transfer, 2004. 47(17-18): p. 3659-3667.
[8] Thorncroft, G.E., J.F. Klausner, and R. Mei, An experimental investigation of bubble growth and detachment in vertical upflow and downflow boiling. International Journal of Heat and Mass Transfer, 1998. 41(23): p. 3857-3871.
[9] Situ, R., et al., Bubble departure frequency in forced convective subcooled boiling flow. International Journal of Heat and Mass Transfer, 2008. 51(25-26): p. 6268-6282.
[10] Basu, N., G.R. Warrier, and V.K. Dhir, Wall Heat Flux Partitioning During Subcooled Flow Boiling: Part 1—Model Development. Journal of Heat Transfer, 2005. 127(2): p. 131.
[11] Warrier, G.R. and V.K. Dhir, Heat Transfer and Wall Heat Flux Partitioning During Subcooled Flow Nucleate Boiling—A Review. Journal of Heat Transfer, 2006. 128(12): p. 1243.
[12] Yeoh, G.H., et al., Fundamental consideration of wall heat partition of vertical subcooled boiling flows. International Journal of Heat and Mass Transfer, 2008. 51(15-16): p. 3840-3853.
[13] Cheung, S.C.P., et al., Modeling subcooled flow boiling in vertical channels at low pressures – Part 1: Assessment of empirical correlations. International Journal of Heat and Mass Transfer, 2014. 75: p. 736-753.
[14] Basu, N., G.R. Warrier, and V.K. Dhir, Onset of Nucleate Boiling and Active Nucleation Site Density during Subcooled Flow Boiling. Journal of Heat Transfer, 2002. 124(4): p. 717-728.
[15] Tu, J.Y. and G.H. Yeoh, On numerical modelling of low-pressure subcooled boiling flows. International Journal of Heat and Mass Transfer, 2002. 45(6): p. 1197-1209.
[16] Yeoh, G.H. and J.Y. Tu, A unified model considering force balances for departing vapour bubbles and population balance in subcooled boiling flow. Nuclear Engineering and Design, 2005. 235(10-12): p. 1251-1265.
[17] Kocamustafaogullari, G. and M. Ishii, Interfacial Area and Nucleation Site Density in Boiling Systems. International Journal of Heat and Mass Transfer, 1983. 26(9): p. 1377-1387.
[18] Kurul, N.a.P., M. Z., On the modeling of multidimensional effects in boiling channels. ANS Proc. 27th National Heat Transfer Conference, Minneapolis, MN, 1991.
[19] Yeoh, G.H., et al., Modeling subcooled flow boiling in vertical channels at low pressures – Part 2: Evaluation of mechanistic approach. International Journal of Heat and Mass Transfer, 2014. 75: p. 754-768.
[20] Situ, R., et al., Bubble lift-off size in forced convective subcooled boiling flow. International Journal of Heat and Mass Transfer, 2005. 48(25-26): p. 5536-5548.
[21] Cho, Y.-J., et al., Development of bubble departure and lift-off diameter models in low heat flux and low flow velocity conditions. International Journal of Heat and Mass Transfer, 2011. 54(15-16): p. 3234-3244.
[22] Xu, J., et al., Experimental visualization of sliding bubble dynamics in a vertical narrow rectangular channel. Nuclear Engineering and Design, 2013. 261: p. 156-164.
[23] Yu, B. and P. Cheng, A Fractal Model for Nucleate Pool Boiling Heat Transfer. Journal of Heat Transfer, 2002. 124(6): p. 1117.
[24] Promtong, M., S.C.P. Cheung, and J. Tu. Numerical modelling of subcooled boiling flow based on mechanistic approach: A validation study using wet steam (IAPWS) as working fluid properties. in Lecture Notes in Engineering and Computer Science. 2016.
[25] Ozar, B., et al., Interfacial area transport of vertical upward steam–water two-phase flow in an annular channel at elevated pressures. International Journal of Heat and Mass Transfer, 2013. 57(2): p. 504-518.
[26] Menter, F.R., 2-Equation eddy-visocity turbulence models for engineering applications. Aiaa Journal, 1994. 32(8): p. 1598-1605.
[27] Anglart, H. and O. Nylund, CFD application to prediction of void distribution in two-phase bubbly flows in rod bundles. Nuclear Engineering and Design, 1996. 163(1–2): p. 81-98.
[28] Ishii, M. and N. Zuber, Drag Coefficient and Relative Velocity in Bubbly, Droplet or Particulate Flows. Aiche Journal, 1979. 25(5): p. 843-855.
[29] Tomiyama, A., Struggle with computational bubble dynamics, in Third International Conference on Multiphase Flow. 1998: Lyon, France 157.
[30] Wellek, R.M., A.K. Agrawal, and A.H. Skelland, Shape of liquid drops moving in liquid media. Aiche Journal, 1966. 12(5): p. 854-&.
[31] Burns, A.D., et al. The Farve averaged drag model for turbulent dispersion in Eulerian Mulit-phase flows. in Proceeding of the Fifth International Conference on Multiphase flow. 2004.
[32] Krepper, E., D. Lucas, and H.M. Prasser, On the modelling of bubbly flow in vertical pipes. Nuclear Engineering and Design, 2005. 235(5): p. 597-611.
[33] Lo, S. and A. Technology, Application of Population Balance to CFD Modeling of Bubbly Flow Via the MUSIG Model. 1996.
[34] Prince, M.J. and H.W. Blanch, Bubble coalescence and break-up in air-sparged bubble columns. AIChE Journal, 1990. 36(10): p. 1485-1499.
[35] Luo, H. and H.F. Svendsen, Theoretical model for drop and bubble breakup in turbulent dispersions. AIChE Journal, 1996. 42(5): p. 1225-1233.
[36] Mikic, B.B. and W.M. Rosenow, A new correlation of pool-boiling data including the effect of heating surface characteristics. Journal of Heat Transfer, 1969.
[37] Zeng, L.Z., et al., A unified model for the prediction of bubble detachment diameters in boiling systems—II. Flow boiling. International Journal of Heat and Mass Transfer, 1993. 36(9): p. 2271-2279.
[38] Patankar, S., Numerical heat transfer and fluid flow. 1980: CRC press.
[39] Yeoh, G.H., C.P. Cheung, and J. Tu, Chapter 3 - Population Balance Approach—A Generic Framework, in Multiphase Flow Analysis Using Population Balance Modeling. 2014, Butterworth-Heinemann: Oxford. p. 69-90.