{"title":"A Comparative Study on Biochar from Slow Pyrolysis of Corn Cob and Cassava Wastes","authors":"Adilah Shariff, Nurhidayah Mohamed Noor, Alexander Lau, Muhammad Azwan Mohd Ali","volume":120,"journal":"International Journal of Biotechnology and Bioengineering","pagesStart":767,"pagesEnd":772,"ISSN":"1307-6892","URL":"https:\/\/publications.waset.org\/pdf\/10005786","abstract":"
Biomass such as corn and cassava wastes if left to decay will release significant quantities of greenhouse gases (GHG) including carbon dioxide and methane. The biomass wastes can be converted into biochar via thermochemical process such as slow pyrolysis. This approach can reduce the biomass wastes as well as preserve its carbon content. Biochar has the potential to be used as a carbon sequester and soil amendment. The aim of this study is to investigate the characteristics of the corn cob, cassava stem, and cassava rhizome in order to identify their potential as pyrolysis feedstocks for biochar production. This was achieved by using the proximate and elemental analyses as well as calorific value and lignocellulosic determination. The second objective is to investigate the effect of pyrolysis temperature on the biochar produced. A fixed bed slow pyrolysis reactor was used to pyrolyze the corn cob, cassava stem, and cassava rhizome. The pyrolysis temperatures were varied between 400 °C and 600 °C, while the heating rate and the holding time were fixed at 5 °C\/min and 1 hour, respectively. Corn cob, cassava stem, and cassava rhizome were found to be suitable feedstocks for pyrolysis process because they contained a high percentage of volatile matter more than 80 mf wt.%. All the three feedstocks contained low nitrogen and sulphur content less than 1 mf wt.%. Therefore, during the pyrolysis process, the feedstocks give off very low rate of GHG such as nitrogen oxides and sulphur oxides. Independent of the types of biomass, the percentage of biochar yield is inversely proportional to the pyrolysis temperature. The highest biochar yield for each studied temperature is from slow pyrolysis of cassava rhizome as the feedstock contained the highest percentage of ash compared to the other two feedstocks. The percentage of fixed carbon in all the biochars increased as the pyrolysis temperature increased. The increment of pyrolysis temperature from 400 °C to 600 °C increased the fixed carbon of corn cob biochar, cassava stem biochar and cassava rhizome biochar by 26.35%, 10.98%, and 6.20% respectively. Irrespective of the pyrolysis temperature, all the biochars produced were found to contain more than 60 mf wt.% fixed carbon content, much higher than its feedstocks.<\/p>\r\n","references":"[1]\tPotsdam Institute for Climate Impact Research and Climate Analytics (PIK), Turn Down the Heat: Why a 4 \u00b0C Warmer World Must be Avoided. Washington, DC: World Bank, 2012.\r\n[2]\tDepartment of Statistics Malaysia (DOSM), Compendium of Environment Statistics Malaysia 2011. Malaysia: DOSM, 2011. \r\n[3]\tThe Intergovernmental Panel on Climate Change (IPCC), Climate Change 2014: Synthesis Report. Contribution of Working Groups I, II and III to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change, C. W. Team, R. K. Pachauri, and L. A. Meyer, Eds. Geneva, Switzerland: IPCC, 2014.\r\n[4]\tD. Woolf, J. E. Amonette, F. A. Street-Perrott, J. Lehmann, and S. Joseph, \u201cSustainable biochar to mitigate global climate change,\u201d Nat. Commun., vol. 1, no. 56, pp. 1\u22129, 2010. \r\n[5]\tE. Cushion, A. Whiteman, and G. Dieterle, Bioenergy Development: Issues and Impacts for Poverty and Natural Resource Management. Washington, DC: World Bank, 2010.\r\n[6]\tJ. Lehmann, J. Gaunt, and M. Rondon, \u201cBio-char sequestration in terrestrial ecosystems - A review,\u201d Mitigation Adapt. Strateg. Glob. Chang., vol. 11, pp. 403\u2212427, 2006.\r\n[7]\tInternational Biochar Initiative (IBI), Biochar: A Soil Amendment that Combats Global Warming and Improves Agricultural Sustainability and Environmental Impacts. 2009.\r\n[8]\tJ. Lehmann, and S. Joseph, \u201cBiochar for environmental management: An introduction\u201d in Biochar for Environmental Management Science, Technology and Implementation, 2nd ed., J. Lehmann and S. Joseph, Eds. New York: Routledge, 2015, pp. 1\u221212.\r\n[9]\tJ. Lehmann, \u201cBio-energy in the black,\u201d Front. Ecol. Environ., vol. 5, no. 7, pp. 381\u2212387, 2007.\r\n[10]\tF. Verheijen, S. Jeffery, A. C. Bastos, M. van der Velde, and I. Diafas, Biochar Application to Soils - A Critical Scientific Review of Effects on Soil Properties, Processes and Functions, EUR 24099 EN, Luxembourg: Office for Official Publications of the European Communities, 2010.\r\n[11]\tE. Krull, Notes on Biochar. The Commonwealth Scientific and Industrial Research Organisation (CSIRO), 2009. \r\n[12]\tS. Joseph, C. Peacocke, J. Lehmann, and P. Munroe, \u201cDeveloping a biochar classification and test methods\u201d in Biochar for Environmental Management: Science and Technology, J. Lehmann and S. Joseph, Eds. UK and USA: Earthscan, 2009, pp. 107\u2212112.\r\n[13]\tH. McLaughlin, Characterizing Biochars Prior to Addition to Soils: Version 1. Alterna Biocarbon Inc., 2010.\r\n[14]\tO. Ma\u0161ek, P. Brownsort, A. Cross, and S. Sohi, \u201cInfluence of production conditions on the yield and environmental stability of biochar,\u201d Fuel, vol. 103, pp. 151\u2212155, 2013.\r\n[15]\tM. I. Jahirul, M. G. Rasul, A. A. Chowdhury, and N. Ashwath, \u201cBiofuels production through biomass pyrolysis - A technological review,\u201d Energies, vol. 5, pp. 4952\u22125001, 2012. \r\n[16]\tA. Downie, A. Crosky, and P. Munroe, \u201cPhysical properties of biochar\u201d in Biochar for Environmental Management: Science and Technology, J. Lehmann and S. Joseph, Eds. UK and USA: Earthscan, 2009, pp. 14\u201332.\r\n[17]\tM. Balat, M. Balat, E. Kirtay, and H. Balat, \u201cMain routes for the thermo-conversion of biomass into fuels and chemicals. Part 1: Pyrolysis systems,\u201d Energy Convers. Manage. , vol. 50, no. 12, pp. 3147\u22123157, 2009. \r\n[18]\tR. Brown, \u201cBiochar production technology\u201d in Biochar for Environmental Management: Science and Technology, J. Lehmann and S. Joseph, Eds. UK and USA: Earthscan, 2009, pp. 127\u2212146.\r\n[19]\tD. Mohan, C.U. Pittman, and P.H. Steele, \u201cPyrolysis of wood\/biomass for bio-oil - A critical review,\u201d Energy Fuels, vol. 20, no. 3, pp. 848\u2212889, 2006. \r\n[20]\tInternational Biochar Initiative (IBI), Feedstocks. 2013.\r\n[21]\tFood and Agriculture Organization of the United Nations (FAO), Dimensions of Need: An Atlas of Food and Agriculture, T. Loftas and J. Ross, Eds. Rome, Italy: FAO, 1995.\r\n[22]\tFood and Agriculture Organization of the United Nations (FAO), FAO Statistics Division. 2016. \r\n[23]\tASTM E1756-08: Standard Test Method for Determination of Total Solids in Biomass. ASTM International, 2008.\r\n[24]\tASTM E872-82: Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels. ASTM International, 2006. \r\n[25]\tASTM E1755-01: Standard Test Method for Ash in Biomass. ASTM International, 2007.\r\n[26]\tASTM D1107-96: Standard Test Method for Ethanol-Toluene Solubility of Wood. ASTM International, 2013.\r\n[27]\tASTM D1106-96: Standard Test Method for Acid-Insoluble Lignin in Wood. ASTM International, 2013.\r\n[28]\tASTM D1104-56: Method of Test for Holocellulose in Wood. ASTM International, 1978.\r\n[29]\tASTM D1103-60: Method of Test for Alpha-Cellulose in Wood. ASTM International, 1977.\r\n[30]\tVieweg, \u201cHeat, fire and stoves\u201d in Fuel-Saving Cook Stoves. Aprovecho Institute, 1984.\r\n[31]\tA. Demeyer, J. C. Voundi Nkana, and M. G. Verloo, \u201cCharacteristics of wood ash and influence on soil properties and nutrient uptake: An overview,\u201d Bioresour. Technol., vol. 77, no. 3, pp. 287\u2212295, 2001.\r\n[32]\tP. A. Brownsort, Biomass Pyrolysis Processes Review of Scope, Control and Variability. UKBRC Working Paper 5, 2009.\r\n[33]\tK. Azduwin, M. J. M. Ridzuan, S. M. Hafis, and T. Amran, \u201cSlow pyrolysis of imperata cylindrica in a fixed bed reactor,\u201d Int. J. Biol. Ecol. Environ. Sci., vol. 1 no. 5, pp. 176\u2212180, 2012. \r\n[34]\tS. U\u00e7ar, and S. Karag\u00f6z, \u201cThe slow pyrolysis of pomegranate seeds: The effect of temperature on the product yields and bio-oil properties,\u201d J. Anal. Appl. Pyrolysis, vol. 84, no. 2, pp. 151\u2212156, 2009.\r\n[35]\tN. Claoston, A. W. Samsuri, M. H. A. Husni, and M. S. M. Amran, \u201cEffects of pyrolysis temperature on the physicochemical properties of empty fruit bunch and rice husk biochars,\u201d Waste Manage. Res., vol. 33, no. 3, pp. 275\u2013283, 2014.\r\n[36]\tP. A. Horne, and P.T. Williams, \u201cInfluence of temperature on the products from the flash pyrolysis of biomass,\u201d Fuel, vol. 75, no. 9, pp. 1051\u22121059, 1996. \r\n[37]\tM. Nik-Azar, M. R. Hajaligol, M. Sohrabi, and B. Dabir, \u201cMineral matter effects in rapid pyrolysis of beech wood,\u201d Fuel Process. Technol., vol. 51, no. 1\u20132, pp. 7\u201317, 1997.\r\n[38]\tC. Gheorghe, C. Marculescu, A. Badea, and T. Apostol, \u201cPyrolysis parameters influencing the bio-char generation from wooden biomass,\u201d U. P. B. Sci. Bull., series C, vol. 72, no. 1, pp. 29\u201338, 2010. \r\n[39]\tA. Paethanom, and K. Yoshikawa, \u201cInfluence of pyrolysis temperature on rice husk char characteristics and its tar adsorption capability,\u201d Energies, vol. 5, no. 12, pp. 4941\u22124951, 2012.","publisher":"World Academy of Science, Engineering and Technology","index":"Open Science Index 120, 2016"}