@article{(Open Science Index):https://publications.waset.org/pdf/10002679,
	  title     = {A Study on Manufacturing of Head-Part of Pipes Using a Rotating Manufacturing Process},
	  author    = {J. H. Park and  S. K. Lee and  Y. W. Kim and  D. C. Ko},
	  country	= {},
	  institution	= {},
	  abstract     = {A large variety of pipe flange is required in marine
and construction industry. Pipe flanges are usually welded or screwed
to the pipe end and are connected with bolts. This approach is very
simple and widely used for a long time; however, it results in high
development cost and low productivity, and the productions made by
this approach usually have safety problem at the welding area. In this
research, a new approach of forming pipe flange based on cold
forging and floating die concept is presented. This innovative
approach increases the effectiveness of the material usage and save
the time cost compared with conventional welding method. To ensure the dimensional accuracy of the final product, the finite
element analysis (FEA) was carried out to simulate the process of
cold forging, and the orthogonal experiment methods were used to
investigate the influence of four manufacturing factors (pin die angle,
pipe flange angle, rpm, pin die distance from clamp jig) and predicted
the best combination of them. The manufacturing factors were
obtained by numerical and experimental studies and it shows that the
approach is very useful and effective for the forming of pipe flange,
and can be widely used later.},
	    journal   = {International Journal of Industrial and Manufacturing Engineering},
	  volume    = {9},
	  number    = {11},
	  year      = {2015},
	  pages     = {1913 - 1916},
	  ee        = {https://publications.waset.org/pdf/10002679},
	  url   	= {https://publications.waset.org/vol/107},
	  bibsource = {https://publications.waset.org/},
	  issn  	= {eISSN: 1307-6892},
	  publisher = {World Academy of Science, Engineering and Technology},
	  index 	= {Open Science Index 107, 2015},