TY - JFULL AU - Chung-Chih Lin and Wen-Teng Wang and Chin-Chiuan Kuo and Chieh-Liang Wu PY - 2014/8/ TI - Experimental and Theoretical Study of Melt Viscosity in Injection Process T2 - International Journal of Mechanical and Mechatronics Engineering SP - 686 EP - 691 VL - 8 SN - 1307-6892 UR - https://publications.waset.org/pdf/9998914 PU - World Academy of Science, Engineering and Technology NX - Open Science Index 91, 2014 N2 - The state of melt viscosity in injection process is significantly influenced by the setting parameters due to that the shear rate of injection process is higher than other processes. How to determine plastic melt viscosity during injection process is important to understand the influence of setting parameters on the melt viscosity. An apparatus named as pressure sensor bushing (PSB) module that is used to evaluate the melt viscosity during injection process is developed in this work. The formulations to coupling melt viscosity with fill time and injection pressure are derived and then the melt viscosity is determined. A test mold is prepared to evaluate the accuracy on viscosity calculations between the PSB module and the conventional approaches. The influence of melt viscosity on the tensile strength of molded part is proposed to study the consistency of injection quality. ER -