An Experimental Investigation on the Behavior of Pressure Tube under Symmetrical and Asymmetrical Heating Conditions in an Indian PHWR
Commenced in January 2007
Frequency: Monthly
Edition: International
Paper Count: 32797
An Experimental Investigation on the Behavior of Pressure Tube under Symmetrical and Asymmetrical Heating Conditions in an Indian PHWR

Authors: Ashwini K. Yadav, Ravi Kumar, Akhilesh Gupta, P. Majumdar, B. Chatterjee, D. Mukhopadhyay

Abstract:

Thermal behavior of fuel channel under loss of coolant accident (LOCA) is a major concern for nuclear reactor safety. LOCA along with failure of emergency cooling water system (ECC) may leads to mechanical deformations like sagging and ballooning. In order to understand the phenomenon an experiment has been carried out using 19 pin fuel element simulator. Main purpose of the experiment was to trace temperature profiles over the pressure tube, calandria tube and clad tubes of Indian Pressurized Heavy Water Reactor (IPHWR) under symmetrical and asymmetrical heat-up conditions. For simulating the fully voided scenario, symmetrical heating of pressure was carried out by injecting 13.2 KW (2 % of nominal power) to all the 19 pins and the temperatures of pressure tube, calandria tube and clad tubes were measured. During symmetrical heating the sagging of fuel channel was initiated at 460 °C and the highest temperature attained by PT was 650 °C . The decay heat from clad tubes was dissipated to moderator mainly by radiation and natural convection. The highest temperature of 680 °C was observed over the outer ring of clad tubes of fuel simulator. Again, to simulate partially voided condition, asymmetrical heating of pressure was carried out by supplying 8.0 kW power to upper 8 pins of fuel simulator and temperature profiles were measured. Along the circumference of pressure tube (PT) the highest temperature difference of 320 °C was observed, which highlights the magnitude of thermal stresses under partially voided conditions.

Keywords: LOCA, ECCS, PHWR, ballooning, channel heat-up, pressure tube, calandria tube.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1332722

Procedia APA BibTeX Chicago EndNote Harvard JSON MLA RIS XML ISO 690 PDF Downloads 1940

References:


[1] R.A. Brown, "Degraded cooling in a CANDU reactor," Nucl Sci Eng 88(3), 1984, pp. 425-35.
[2] G.E. Gillespie, R.G Moyer, D.G. Litke,"The experimental determination of circumferential temperature distributions developed in pressure tube during slow coolant boil down," Proc. CNS 8th Annual Conference, Saint John,1987, pp. 241-248.
[3] P.Gulshani, "Prediction of pressure tube integrity for a small LOCA and total loss of emergency coolant injection in CANDU," Trans Am Nucl Soc 55(Nov), 1987, pp-461.
[4] S.K. Gupta, B.K. Dutta, V. Venkatraj, A. Kakodkar, "A study of Indian PHWR reactor channel under prolonged deteriorated flow conditions.," IAEA TCM: Advances in Heavy Water Reactor, Bhabha Atomic research centre, India, 1996.
[5] E. Kohn, G.I. Hadaller, R.M. Sawala, G.H. Archinoff, S.L. Wadsworth, "CANDU fuel development during severely degraded cooling: experimental results.," In: Canadian Nuclear Society Conference, Ottawa, Ontario, 1985.
[6] T.H. Kuehn, R.J. Goldstein, "An experimental and theoretical study of natural convection in the horizontal annulus between horizontal concentric cylinders.," Journal of Fluid mechanics 74 (4), pp- 695-719.
[7] P. Majumdar, D. Mukhopadhyay, S.K. Gupta, H.S. Kushwaha, V. Venkat Raj,"Simulation of pressure tube deformation during high temperature transients," International Journal of Pressure Vessels and Piping 81 (7), 2004, pp-575-581.
[8] G. Nandan, P.K. Sahoo, R. Kumar, B. Chatterjee, D. Mukhopadhyay, H.G. Lele, "Experimental investigation of sagging of a completely voided pressure tube of Indian PHWR under heatup condition," Nuclear Engineering and Design 240 (10), 2010, pp- 3504-3512.
[9] R.S.W. Shewfelt, L.W. Layall, D. P. Godin, "High temperature creep model for Zr-2.5 wt.% Nb pressure tubes," Journal of Nuclear Materials 125, 1984, pp- 228-235.
[10] R.S.W. Shewfelt, L.W. Layall, "A high temperature longitudinal strain rate equation for Zr-2.5 wt% Nb pressure tubes," Journal of Nuclear Materials 132, 1985, pp- 41-6.
[11] P.S. Yuen, C.B. So, R.G. Moyer, D.G. Litke, "The experimental measurement of circumferential temperature distributions developed on pressure tubes under stratified two-phase of conditions," In Proc. CNS 9th Annual Conference, Winnipeg, Manitoba, 1988,pp-120-126.