Homotopy Analysis Method for Hydromagnetic Plane and Axisymmetric Stagnation-point Flow with Velocity Slip
Commenced in January 2007
Frequency: Monthly
Edition: International
Paper Count: 32797
Homotopy Analysis Method for Hydromagnetic Plane and Axisymmetric Stagnation-point Flow with Velocity Slip

Authors: Jing Zhu, Liancun Zheng, Xinxin Zhang

Abstract:

This work is focused on the steady boundary layer flow near the forward stagnation point of plane and axisymmetric bodies towards a stretching sheet. The no slip condition on the solid boundary is replaced by the partial slip condition. The analytical solutions for the velocity distributions are obtained for the various values of the ratio of free stream velocity and stretching velocity, slip parameter, the suction and injection velocity parameter, magnetic parameter and dimensionality index parameter in the series forms with the help of homotopy analysis method (HAM). Convergence of the series is explicitly discussed. Results show that the flow and the skin friction coefficient depend heavily on the velocity slip factor. In addition, the effects of all the parameters mentioned above were more pronounced for plane flows than for axisymmetric flows.

Keywords: slip flow, axisymmetric flow, homotopy analysismethod, stagnation-point.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1063274

Procedia APA BibTeX Chicago EndNote Harvard JSON MLA RIS XML ISO 690 PDF Downloads 1655

References:


[1] Hiemenz, Die Grenzschicht an einem in den gleichfor-migen Fluessigkeitsstrom eingetauchten geraden Kreiszy-linder. Dinglers Polytechnisches J, 326 (1911) 321-410.
[2] T. Chiam, Stagnation-point flow towards a stretching plate, J. Phys. Soc. Jpn, 63(6), (1994) 2443-2444.
[3] T.R.Mahapatra and A.S.Gupta, Heat transfer in stagnation-point flow towards a stretching sheet, Heat Mass. Tran, 38(6) (2002) 517-521.
[4] A.Ishak, R. Nazar and I.Pop, Dual solutions in mixed convection flow near a stagnation point on a vertical surface in a porous medium, Int. J. Heat. Mass. Tran, 51(5-6) (2008) 1150-1155.
[5] A. Yoshimura and R.K. Prudhomme, Wall slip correc-tions for Couette and parallel disc viscometers, J. Rheol, 32(1) (1988) 53-67.
[6] M.Mooney, Explicit formulas for slip and fluidity. J. Rheology. 2(2) (1931) 210-222.
[7] I. J.Rao and K. R.Rajagopal, The effect of the slip condition on the flow of fluids in a channel, Acta Mech. 135(3) (1999) 113-126.
[8] A. R. A.Khaled and Vafai, K. The effect of slip condition on Stokes and Couette flows due to an oscillating wall: exact solutions, Int. J. Non-Linear Mech, 39(5) (2004) 795-804.
[9] T.Hayat, K.Masood and M.Ayub, The effect of the slip condition on flows of an Oldroyd 6-constant fluid, J. Comput. Appl. Math, 202(2), (2007) 402-413.
[10] R.C.Chaudnary, A.K. Jiha and F.Hang, Effects of Chemical Reaction on MHD Micropolar Fluid Flow Past a Vertical Plate in Slip-Flow Regime, Appl. Math. Mech. 29(9) (2008) 1179-1194.
[11] H. I. Andersson and M.Rousselet, Slip flow over a lubri-cated rotating disk, Int. J. Heat.Fluid Flow 27(2) (2006) 329-335.
[12] F.Labropulu and D.Li, Stagnation-point flow of a second- grade fluid with slip, Int. J. Non-Linear Mech, 43(9) (2008) 941-947.
[13] C. Y.Wang, Flow due to a stretching boundary with partial slipÔÇòan exact solution of the Navier-Stokes equations, Chem. Eng. Sci, 57(17) (2002) 3745-3747.
[14] C. Y.Wang, Stagnation slip flow and heat transfer on a moving plate, Chem. Eng. Sci, 61(23) (2006)7668-7672.
[15] S.J.Liao, Beyond perturbation: introduction to homo-topy analysis method. Boca Raton, Chapman, 2003, Hall/CRC.
[16] J.Zhu, L. C.Zheng and X. X.Zhang, Analytic solution of stagnation-point flow and heat transfer over a stretching sheet based on homotopy analysis, Appl. Math. Mech. 30(4) (2009) 463-474.
[17] T.Hayat Z.Abbas and M.Sajid, Series solution for the upper-convected Maxwell fluid over a porous streching plate, Phys. Lett. A, 358(5-6) (2006) 396-403.
[18] C.Wang and I.Pop, Analysis of the flow of a power-law fluid film on an unsteady stretching surface by means of homotopy analysis method, Journal of Non-Newtonian Fluid Mechanics, 138(2-3) (2006) 161-172.