Study on Numerical Simulation Applied to Moisture Buffering Design Method – The Case Study of Pine Wood in a Single Zone Residential Unit in Taiwan

Authors: Y.C. Yeh, Y.S. Tsay, C.M. Chiang

Abstract:

A good green building design project, designers should consider not only energy consumption, but also healthy and comfortable needs of inhabitants. In recent years, the Taiwan government paid attentions on both carbon reduction and indoor air quality issues, which be presented in the legislation of Building Codes and other regulations. Taiwan located in hot and humid climates, dampness in buildings leads to significant microbial pollution and building damage. This means that the high temperature and humidity present a serious indoor air quality issue. The interactions between vapor transfers and energy fluxes are essential for the whole building Heat Air and Moisture (HAM) response. However, a simulation tool with short calculation time, property accuracy and interface is needed for practical building design processes. In this research, we consider the vapor transfer phenomenon of building materials as well as temperature and humidity and energy consumption in a building space. The simulation bases on the EMPD method, which was performed by EnergyPlus, a simulation tool developed by DOE, to simulate the indoor moisture variation in a one-zone residential unit based on the Effective Moisture Penetration Depth Method, which is more suitable for practical building design processes.

Keywords: Effective Moisture Penetration Depth Method, Moisture Buffering Effect, Interior Material, Green Material, EnergyPlus

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1061150

References:

[1] B. Meyer, "Indoor Air Quality", Addison-Wesley, Reading, Mass., 1983.
[2] A.V. Arundel, E.M. Sterling, J.H. Biggin, and T.D. Sterling, "Indirect Health Effects of Relative Humidity in Indoor Environments", Environmental Health Perspectives, Vol. 60, pp. 351-361, 1986.
[3] C.G. Bornehag, J. Sundell, S. Bonini, A. Custovic, P. Malmberg, S. Skerfving, T. Sigsgaard, and A. Verhoeff, "Dampness in buildings as a risk factor for health effects", EUROEXPO: a multidisciplinary review of the literature (1998-2000) on dampness and mite exposure in buildings and health effects, Indoor Air, Vol.14:243-257, 2004
[4] The Ministry of Health, Labor and Welfare of Japan, website: www.mhlw.go.jp/english/index.html.
[5] Health Canada, "Exposure Guidelines for Residential Indoor Air Quality - A Report of the Federal-Provincial Advisory Committee on Environmental and Occupational Health", April 1987.
[6] "Code of Practice for Indoor Air quality for Air-Conditioned Buildings", Singapore Standard SS 554:2009, 2009.
[7] P.C. Wu, H.J. Su, and C.Y. Lin, "Characteristics of indoor and outdoor airborne fungi at suburban and urban homes in two seasons", The Science of The Total Environment, Vol. 253, Issues 1-3: 111-118, 2000.
[8] P.F. Chi, "Fungal Growth on Building Materials", Master Thesis of National Cheng Kung University, 2003.
[9] Y.S. Tsay, C.M. Chiang, and Y.C. Yeh, "Numerical study on the influence of moisture buffering effect and energy impact of interior materials in hot and humid climates" Indoor Air 2011, Austin, Jun. 5-10, 2011.
[10] Y.C. Yeh, Y.S. Tsay, and C.M. Chiang, "Study on the Performance and Application of Interior Moisture Buffering Materials for the Typical Housing in Taiwan", Advanced Materials Research, Vol. 250-253, Advanced Building Materials, May, 2011, pp.3723-3729
[11] H. Hens, "Impact of adventitious ventilation on the moisture performance of roofs in moderate climates", 2003
[12] M. Abadie, J.P. Deblois, N. Mendes, "A comparison exercise for calculation heat and moisture transfers using TRNSYS and PowerDomus." IEA Annex 41 report A41-T1-Br-05-2, 2005.
[13] A. Kerestecioglu, M. Swami and A. Kamel, "Theoretical and Computational Investigation of Simultaneous Heat and Moisture Transfer in Buildings: Effective Penetration Depth Theory." ASHRAE Winter Meeting, Atlanta, GA, 1989
[14] A. Janssenss, M. Woloszyn, C. Rode, A. Sasic-Kalagasidis, and M.D. Paepe, " From EMPD to CFD- overview of different approaches for Heat Air and Moisture modeling in IEA Annex 41" Copehagen, IEA ECBCS Annex 41 Closing Seminar, June 19, 2008
[15] H.M. Kumzel, A. Holm, D. Zirkelbach, and A.N. Karagiozis, "Simulation of indoor temperature and humidity conditions including hygrothermal interactions with building envelope", Solar Energy, Vol. 78, pp.554-561, 2005.