Performance Evaluation of Improved Ball End Magnetorheological Finishing Process

Authors: Anant Kumar Singh, Sunil Jha, Pulak M. Pandey

Abstract:

A novel nanofinishing process using improved ball end magnetorheological (MR) finishing tool was developed for finishing of flat as well as 3D surfaces of ferromagnetic and non ferromagnetic workpieces. In this process a magnetically controlled ball end of smart MR polishing fluid is generated at the tip surface of the tool which is used as a finishing medium and it is guided to follow the surface to be finished through computer controlled 3-axes motion controller. The experiments were performed on ferromagnetic workpiece surface in the developed MR finishing setup to study the effect of finishing time on final surface roughness. The performance of present finishing process on final finished surface roughness was studied. The surface morphology was observed under scanning electron microscopy and atomic force microscope. The final surface finish was obtained as low as 19.7 nm from the initial surface roughness of 142.9 nm. The outcome of newly developed finishing process can be found useful in its applications in aerospace, automotive, dies and molds manufacturing industries, semiconductor and optics machining etc.

Keywords: Ball end MR finishing tool, Magnetorheological finishing, Nanofinishing

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1331277

References:

[1] V. K. Jain, S. C. Jayswal, P. M. Dixit, "Modeling and Simulation of Surface Roughness in Magnetic Abrasive Finishing Using Non-Uniform Surface Profiles," Materials and Manufacturing Processes, vol. 22/2, pp. 256 - 270, 2007.
[2] Z. W. Zhong, "Recent Advances in Polishing of Advanced Materials," Materials and Manufacturing Processes, vol. 23/5, pp. 449 - 456,2008.
[3] T. Hoshino, Y. Kurata, Y. Terasaki, K. Susa, "Mechanism of polishing of SiO2 films by CeO2 particles," Journal of Non-Crystalline Solids, vol. 283, pp. 129-136, 2001.
[4] S.D. Jacobs, D. Golini, Y. Hsu, B.E. Puchebner, D. Strafford, Wm.I. Kordonski, I.V. Prokhorov, E. Fess, D. Pietrowski, V.W. Kordonski, "Magnetorheological finishing: a deterministic process for optics manufacturing," International Conference on Optical Fabrication and Testing, 1995, Proc. SPIE 2576, T. Kasai, ed., pp. 372-382.
[5] D. Golini, S.D. Jacobs, W. Kordonski, P. Dumas, "Precision optics fabrication using magnetorheological finishing," in Advanced Materials for Optics and Precision Structures, vol. CR67 of SPIE, 1997, pp. 251-274.
[6] W.I. Kordonski, S.D. Jacobs, "Magnetorheological finishing," International Journal of Modern Physics B, vol. 10, pp. 2857- 2865,1996.
[7] A.B.Shorey , S.D.Jacobs,W.I. Kordonski ,R.F. Gans , "Experiments and observations regarding mechanisms of glass removal in magnetorheological finishing," Applied Optics , vol. 40/1, pp. 20-33,2001.
[8] W.Kordonski, D.Golini, P. Dumas, S. Jacobs, "Magnetorheological suspension-based finishing technology", Proc. SPIE 3326, pp. 527-535, 1998.
[9] Donald Golini, William I Kordonski, Paul Dumas, Steve Hogan, "Magnetorheological finishing (MRF) in commercial precision optics manufacturing," Proc. SPIE 3782 conference on optical manufacturing and testing, pp. 80-90, 1999.
[10] A. Kumar Singh, S. Jha, P.M. Pandey, "Design and development of nanofinishing process for 3D surfaces using ball end MR finishing tool," International Journal of Machine Tools & Manufacture, vol. 51, pp. 142-151, 2011.
[11] S. Jha, V.K. Jain, "Design and development of the magnetorheological abrasive flow finishing (MRAFF) process," International Journal of Machine Tools & Manufacture, vol. 44, pp. 1019-1029, 2004.