A Study on Evaluation of Strut Type Suspension Noise Caused by Rubber Degradation

Authors: Gugyong Kim, Sugnsu Kang, Yongjun Lee, Sooncheol Park, Wonwook Jung

Abstract:

When cars are released from the factory, strut noises are very small and therefore it is difficult to perceive them. As the use time and travel distance increase, however, strut noises get larger so as to cause users much uneasiness. The noises generated at the field include engine noises and flow noises and therefore it is difficult to clearly discern the noises generated from struts. This study developed a test method which can reproduce field strut noises in the lab. Using the newly developed noise evaluation test, this study analyzed the effects that insulator performance degradation and failure can have on car noises. The study also confirmed that the insulator durability test by the simple back-and-forth motion cannot completely reflect the state of the parts failure in the field. Based on this, the study also confirmed that field noises can be reproduced through a durability test that considers heat aging.

Keywords: Insulator, noise, performance degradation, strut

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1056258

References:

[1] K. Genuit, "New aspects of measuring noise and vibration,” 5th western pacific regional acoustics conference, Seoul, Korea, 1994, pp. 796-801.
[2] A. Kruse, "Characterizing and reducing structural noises of vehicle shock absorber systems,” SAE paper 2002-01-1234, 2002.
[3] D. Colombo, M. Gobbi, G. Mastinu, and M. Pennati, "Analysis of an unusual McPherson suspension failure,” Eng Fail Anal, vol. 16, 2009, pp. 1000–1010.
[4] X. Shen., and F. Yu, "Study on vehicle chassis control integration based on a main-loop–inner-loop design approach,” Proc. Instn Mech. Engrs, Part D: J. Automobile Engineering,vol. 220, 2006, pp. 1491-1502.
[5] V. Y. B. Yung, and D. J. Cole, "Wavelet analysis of high-frequency damper behavior,” Proc. Instn Mech. Engrs, Part D: J. Automobile Engineering, vol. 219, 2005, pp. 977-988.
[6] M. D. Rao, and S. Gruenberg, "Measurement of dynamic properties of automotive shock absorbers for NVH,” SAE paper 1999-01-1840, 1999.
[7] S. K. Jha, "Characteristics and sources of noise and vibration and their control in motor cars,” J. Sound Vib, vol. 47, 1976, pp. 543-558.
[8] F. E. Ngolemasango, M. Bennett, and J. Clarke, "Degradation and life prediction of a natural rubber engine mount compound,” J Appl Polymer Sci, vol. 110, 2008, pp. 348-355.
[9] M. Achenbach, "Service life of seals: numerical simulation in sealing technology enhances prognoses,” Comput Mater Sci, vol. 19, 2000, pp. 213–222.
[10] K. T. Gillen, M. Celina, and R. Bernstein, "Validation of improved methods for predicting long-term elastomeric seal lifetimes from compression stress-relaxation and oxygen consumption techniques,” Polym Degrad Stab, vol. 82, 2003, pp. 25-35.
[11] Y. M. Goh, J. D. Booker, and C. A. Mcmahon, "Uncertainty modeling of a suspension unit,” Proc. Instn Mech. Engrs, Part D: J. Automobile Engineering, vol. 219, 2005, pp. 755-771.
[12] C. Lewitzke, and P. Lee, "Application of Elastomeric Components for Noise and Vibration Isolation in the automotive industry,” SAE paper 2001-01-1447, 2001.