Performance Characteristics of Some Small Scale Wind Turbines Fabricated in Tanzania

Authors: Talam K. E, Kainkwa R. M.

Abstract:

In this study, a field testing has been carried out to assess the power characteristics of some small scale wind turbines fabricated by one native technician from Tanzania. Two Horizontal Axis Wind Turbines (HAWTs), one with five and other with sixteen blades were installed at a height of 2.4m above the ground. The rotation speed of the rotor blade and wind speed approaching the turbines were measured simultaneously. The data obtained were used to determine how the power coefficient varies as a function of tip speed ratio and also the way in which the output power compares with available power in the wind for each turbine. For the sixteen-bladed wind turbine the maximum value of power coefficient of about 0.14 was found to occur at a tip speed ratio of around 0.65 while for the five bladed, these extreme values were respectively attained at approximately 0.2 and 1.7. The five bladed-wind turbine was found to have a higher power efficiency of about 37.5% which is higher compared to the sixteen bladed wind turbine whose corresponding value was 14.37%. This is what would be expected, as the smaller the number of blades of a wind turbine, the higher the electric power efficiency and vice versa. Some of the main reasons for the low efficiency of these machines may be due to the low aerodynamic efficiency of the turbine or low efficiency of the transmission mechanisms such as gearbox and generator which were not examined in this study. It is recommended that some other researches be done to investigate the power efficiency of such machines from different manufacturers in the country. The manufacturers should also be encouraged to use fewer blades in their designs so as to improve the efficiency and at the same time reduce materials used to fabricate the blades. The power efficiency of the electric generators used in the locally fabricated wind turbines should also be examined.

Keywords: Tip speed ratio, Power coefficients and power efficiency.

Digital Object Identifier (DOI): doi.org/10.5281/zenodo.1088964

References:

[1] R.M.R. Kainkwa. Survey of Wind Power Potential for Wind-Based Electricity at Makambako, Iringa, Tanzania. Tanzania Journal of Science, Vol. 33, pp 1-10, 2007.
[2] L. Mchau ”Personal communication", 2011.
[3] L. G. Johnson, Wind Energy Systems: Electronic edition. Kansas State University, 2006.
[4] N. S. Cetin, M.A. Yurdusev, R. Ata and A. Ozdemir, Assessment of Optimum Tip Speed Ratio of Wind Turbine", Journal of Mathematical and Computational Application, Volume 1, pp. 147-154, 2005.
[5] J. Twidell and T. Weir, Renewable Energy Resources, 2nd Ed. Taylor & Francis, 2006.
[6] M. G. Masters, Renewable and Efficient Electric Power Systems. John Wiley and Sons Inc Publications, 2004.
[7] S. Mathew, Wind Energy, Fundamentals, Resource Analysis and Economics: Springer- Verlage Berlin Heidelberg, 2006.
[8] IEC International Standard 60945 Fourth Edition,2002 – 2008.
[9] S. Bhowmik “Performance Optimization For Doubly Fed Wind Power Generation Systems", IEEE Transaction on Industries Application, l4 July/ August, 1999.
[10] K. Mok, Identification of the Power Coefficients of Wind Turbines, Proceedings of the 45th IEEE Conference on Decision and Control, 2005.